Zerone S866 Electric LCD Display Panel User Manual

1. Uvod

Thank you for choosing the Zerone S866 Electric LCD Display Panel. This manual provides essential information for the proper installation, operation, and maintenance of your new display. Please read it thoroughly before use to ensure optimal performance and longevity of the product.

Slika 1.1: Spredaj view of the Zerone S866 Electric LCD Display Panel, showing the screen and control buttons.

2. Značilnosti izdelka

• Enostaven nadzor: Quick key functionality allows for straightforward control and parameter adjustment.
• Enostavna namestitev: Includes an LCD bracket for easy mounting on standard 22.2mm handlebars.
• Jasen zaslon: Provides clear status and data information with a backlight feature for visibility in low-light conditions.
• Wide Voltage Združljivost: Supports 24V, 36V, 48V, and 60V electric bike systems.
• Trajna zasnova: Constructed from lightweight and robust ABS material, resistant to daily impacts.

3. Specifikacije

4. Vsebina paketa

Po odprtju paketa preverite, ali so vsi artikli prisotni in v dobrem stanju:

• 1 x Zerone S866 Electric LCD Display Panel
• 1 x Navodila za uporabo (ta dokument)

5. Nastavitev in namestitev

Follow these steps to properly install your Zerone S866 LCD Display Panel on your electric bicycle:

1. Prepare Handlebars: Ensure the handlebar area where you intend to mount the display is clean and free of obstructions. The display is designed for 22.2mm diameter handlebars.
2. Namestitev zaslona: Use the included bracket to securely attach the S866 display to your handlebar. Tighten the screws firmly but do not overtighten to avoid damage.


Figure 5.1: The S866 display panel shown mounted on bicycle handlebars, ready for connection.

3. Povežite ožičenje: Carefully connect the display's cable to the corresponding port on your electric bicycle's controller or wiring harness. Ensure the connectors are fully seated and secure. Refer to your electric bike's wiring diagram if unsure.


Slika 5.2: Zadaj view of the S866 display, highlighting the integrated connection cable.

4. Upravljanje kablov: Route the cable neatly along your bike frame and secure it with cable ties to prevent snagging or damage during riding.
5. Začetni vklop: Once installed and connected, power on your electric bike. The display should illuminate and show initial data.

6. Navodila za uporabo

The Zerone S866 LCD Display Panel provides clear information and easy control over your electric bike's functions.

Slika 6.1: Bližnji posnetek view of the S866 display, showing the digital speed, battery indicator, assist level, and trip distance.

6.1. Funkcije gumbov

• Gumb za prižig (ⓘ):
  • Press and hold to turn the display ON/OFF.
  • Short press to cycle through display modes (e.g., Odometer, Trip Distance).
• Gumb gor (+):
  • Short press to increase assist level or navigate menu options upwards.
  • Long press (in certain modes) for specific functions (e.g., headlight control, if supported by your bike's controller).
• Gumb navzdol (-):
  • Short press to decrease assist level or navigate menu options downwards.
  • Long press (in certain modes) for specific functions.

6.2. Prikaz informacij

The LCD screen provides real-time data:

• Hitrost: Trenutna hitrost vožnje (km/h ali mph).
• Raven baterije: Graphical indicator showing remaining battery charge.
• Raven pomoči: Current pedal assist level (e.g., 0-5).
• Razdalja potovanja: Prevožena razdalja med trenutno vožnjo.
• Števec kilometrov: Total distance covered by the bike.
• Kode napak: Displays specific codes if a system error occurs.

6.3. Prilagoditev parametrov

The display allows for basic parameter adjustments. Typically, this involves entering a settings menu by holding a combination of buttons (e.g., Up and Down simultaneously) for a few seconds. Common adjustable parameters may include:

• Unit System (km/h vs. mph)
• Premer kolesa
• Baterija Voltage Nastavitev

Note: Specific parameter adjustment procedures may vary slightly. Refer to your electric bike's main controller manual for advanced settings.

7. Vzdrževanje in nega

To ensure the longevity and proper functioning of your Zerone S866 LCD Display Panel, follow these maintenance guidelines:

• Čiščenje: Zaslon in ohišje obrišite z mehko krpoamp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as they can damage the plastic and screen.
• Izpostavljenost vodi: While the display has an IP65 waterproof rating, avoid submerging it in water or exposing it to high-pressure water jets (e.g., from a power washer). Dry any moisture promptly.
• Temperatura: Avoid exposing the display to extreme temperatures, both hot and cold, for extended periods.
• Vpliv: Protect the display from physical impacts and drops, which can cause internal or external damage.
• Povezave: Občasno preverjajte ožičene povezave, da se prepričate, da so varne in brez korozije.

8. Odpravljanje težav

If you encounter issues with your Zerone S866 LCD Display Panel, try the following troubleshooting steps:

If these steps do not resolve the issue, please contact Zerone customer support or your electric bike dealer for further assistance.

9. Garancija in podpora

For specific warranty information regarding your Zerone S866 Electric LCD Display Panel, please refer to the warranty card included with your purchase or contact the seller directly. Zerone is committed to providing quality products and customer satisfaction.

For technical support or inquiries, please visit the official Zerone store on Amazon or contact their customer service channels as provided at the point of purchase.

Zerone Store Link: https://www.amazon.com/stores/Zerone/page/A619C4D9-FCE5-459B-B745-8DD2D44F2669