Formulamod Fm-48124P-S-450

FormulaMod 12VHPWR Extension Cable Instruction Manual

Model: Fm-48124P-S-450

1. Uvod

This manual provides instructions for the proper installation, operation, and maintenance of the FormulaMod 12VHPWR Extension Cable. This cable is designed to connect a 16-pin (12+4) PCIe 5.0 GPU to a power supply unit (PSU) using four 8-pin PCIe connectors.

2. Izdelek je končanview

2.1 Lastnosti

  • Vrsta priključka: 16-pin (12+4) Male to 4x 8-pin Female.
  • Merilo kabla: 16AWG for stable power delivery.
  • Dolžina: 30cm (12-inch).
  • Oblikovanje: Sleeved power cord with pre-installed cable combs for neat cable management.
  • Material: Ultra-soft, high-density nylon braid with tinned copper conductors.
  • Združljivost: Designed for PCIe 5.0 GPUs such as RTX 4090, RTX 4080, and RTX 3090 Ti.

2.2 Specifikacije

ZnamkaFormulamod
Številka modelaFm-48124P-S-450
barvaČrna
Spol konektorjaMoški za žensko
voltage220.0 V
Vhodni tok2 Amps
Na seznamu ULšt

3. Navodila za nastavitev

Follow these steps to properly install your FormulaMod 12VHPWR Extension Cable:

  1. Pripravite svoj sistem: Ensure your computer is powered off and unplugged from the wall outlet. Open your computer case to access the graphics card and power supply unit.
  2. Identificirajte konektorje: Locate the 16-pin (12+4) power input on your PCIe 5.0 graphics card. Identify four available 8-pin PCIe power output connectors on your power supply unit.
  3. Povežite se z grafičnim procesorjem: Carefully insert the 16-pin male connector of the extension cable into the corresponding 16-pin port on your graphics card. Ensure it is fully seated and latched.
  4. Connect to PSU: Connect each of the four 8-pin female connectors from the extension cable to four neodvisen 8-pin PCIe power cables from your power supply. It is crucial to use separate cables from the PSU for each 8-pin connector on the extension cable to ensure stable power delivery and prevent overloading.
Diagram showing correct and incorrect connection methods for the 12VHPWR extension cable.
Pomembno: Always use 4 independent 8-pin PCIe cables from your power supply. Do not connect more than one 8-pin connector to a single split cable from the PSU.
Image showing the FormulaMod 12VHPWR extension cable connected to a GPU, demonstrating a neat and tidy installation.
The flexible design and included cable combs facilitate a clean and organized installation within your PC case.

4. Navodila za uporabo

Once the FormulaMod 12VHPWR Extension Cable is securely connected to both your graphics card and power supply, no further operational steps are required for the cable itself. The cable acts as a passive conduit for power. Ensure all connections are firm before powering on your system.

After installation, close your computer case, plug in the power cord, and power on your system. Verify that your graphics card receives power and functions correctly.

5. Vzdrževanje

The FormulaMod 12VHPWR Extension Cable requires minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:

  • Redni pregled: Periodically check the cable and its connectors for any signs of wear, damage, or discoloration.
  • Čistoča: Keep the cable free from dust and debris. Use compressed air or a soft, dry cloth to gently clean the cable and connectors.
  • Izogibajte se stresu: Do not bend the cable sharply or apply excessive force to the connectors. The cable features a pre-bent design for easier routing, but extreme angles can damage the internal wiring.
  • Varne povezave: Ensure all connections remain firmly seated. Loose connections can lead to power instability or component damage.
Close-up image of the 16AWG tinned copper wires within the FormulaMod extension cable, highlighting its robust construction.
The 16AWG tinned copper construction ensures durability and stable power delivery.

6. Odpravljanje težav

If you encounter issues after installing the FormulaMod 12VHPWR Extension Cable, consider the following troubleshooting steps:

  • No Power to GPU:
    • Ensure the 16-pin connector is fully seated into the graphics card. A click should be heard or felt.
    • Verify that all four 8-pin connectors are securely plugged into independent PCIe power cables from your PSU.
    • Check that your PSU is adequately powered and functioning correctly.
  • Nestabilnost ali zrušitve sistema:
    • Confirm that your power supply unit meets the minimum wattage requirements for your graphics card and entire system.
    • Re-check all cable connections to ensure they are firm and not loose.
    • Ensure you are using four separate 8-pin PCIe cables from the PSU, not split cables, as shown in the setup diagram.
  • Fizična poškodba: If the cable appears damaged, bent, or discolored, discontinue use immediately and replace it.

7. Garancija in podpora

For warranty information or technical support, please refer to the official Formulamod webspletno mesto ali se obrnite neposredno na njihovo službo za stranke. Račun shranite kot dokazilo o nakupu za morebitne garancijske zahtevke.

Proizvajalec: Formulamod

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.