Minetom BL-HW02

Minetom BL-HW02 Outdoor RGB Christmas Laser Light Projector User Manual

Model: BL-HW02

1. Uvod

Hvala za nakupasing the Minetom BL-HW02 Outdoor RGB Christmas Laser Light Projector. This device is designed to create dynamic and decorative light displays for various occasions, both indoors and outdoors. Featuring multiple color combinations, motion effects, and remote control operation, it offers a versatile lighting solution. Please read this manual thoroughly before use to ensure proper operation and safety.

2. Varnostne informacije

  • Varnost za oči: Do not look directly into the laser light beam. Direct exposure to laser light can cause eye damage.
  • vir energije: Prepričajte se, da vir napajanja ustreza voltage requirements specified on the product label. Use only the provided power adapter.
  • Zunanja uporaba: While the projector is IP65 waterproof, ensure the power adapter and connections are protected from water exposure.
  • Namestitev: Install the projector securely to prevent it from falling or being dislodged by wind or other environmental factors.
  • Otroci in hišni ljubljenčki: Napravo hranite izven dosega otrok in hišnih ljubljenčkov, da preprečite nenamerno škodo ali poškodbe.
  • Temperatura: Do not operate the device outside its specified temperature range (-30°F to 104°F).
  • Vzdrževanje: Naprave ne poskušajte odpirati ali popravljati sami. Vsa servisna dela prepustite usposobljenemu osebju.

3. Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

  • Minetom RGB Christmas Laser Light Projector
  • RF daljinski upravljalnik
  • Osnovni vložek
  • Okrogla osnova
  • Power Adapter (with 16.4ft extension cord)
  • Uporabniški priročnik (ta dokument)

4. Nastavitev

4.1 Choosing an Installation Method

The projector offers three installation options: ground-mounted, wall-mounted, or placed on a flat surface.

Minetom laser light projector showing three installation methods: wall-mounted, ground-mounted, and placed on a flat surface.

Image: The Minetom laser light projector can be installed in three ways: wall-mounted, ground-mounted, or placed on a flat surface using the included accessories.

  1. Ground-Mounted: Attach the ground stake to the projector. Insert the stake firmly into soft ground in your desired outdoor location.
  2. na steno: Attach the round base to the projector. Secure the base to a wall using appropriate screws (not included) for a stable installation.
  3. Placed on Plane: Attach the round base to the projector. Place the projector on any stable, flat surface indoors or outdoors.

4.2 Napajalni priključek

  • Connect the projector to the provided power adapter.
  • Use the 16.4ft extension cord to reach a suitable outdoor power outlet.
  • Ensure all connections are secure and protected from moisture.
  • Priključite napajalnik v ozemljeno električno vtičnico.

5. Navodila za uporabo

Once powered on, the projector will begin its default light show. Use the RF remote control to customize the display.

5.1 Funkcije daljinskega upravljalnika

The RF remote control allows you to manage various settings from a distance. Ensure 2*AAA batteries (not included) are installed in the remote.

Diagram of the RF remote control for the Minetom laser light projector, showing buttons for power, timers, color selection, motion, and strobe effects.

Image: RF Remote Control layout with functions for each button.

Funkcije gumbov na daljinskem upravljalniku
Gumbfunkcija
VKLOP/IZKLOPVklopi ali izklopi projektor.
2H/4H/6HNastavi časovnik na 2, 4 ali 6 ur.
(H) RestoreRestores to default timing (6 hours on, 18 hours off).
Barvni cikelCycles through Green, Blue, Red-Green, Blue-Green, Red-Blue, Red-Green-Blue, and Red-Green-Blue cycle.
Način dihanjaActivates a slow fade-in/fade-out effect.
Jumping ModeActivates a rapid color change effect.
S0 (Static)Sets the light display to static (no motion).
S- / S+Adjusts rotation speed (S- for slow, S+ for fast).
R/G/BSelects Red, Green, or Blue light individually.
R/G/B BreathingActivates breathing mode for individual Red, Green, or Blue colors.
R/G/B StrobeActivates strobe mode for individual Red, Green, or Blue colors. Press sequentially to adjust speed (Slow, Medium, Fast, Stop).
R/G/B SteadySets individual Red, Green, or Blue colors to steady (non-flashing).

5.2 barvnih kombinacij

The projector supports various color combinations to create diverse effects.

Seven different color combinations displayed by the Minetom laser light projector: Red, Green, Blue, Red Green, Red Blue, Green Blue, and Red Green Blue.

Slika: npramples of the 7 available color combinations.

  • Rdeča
  • zelena
  • Modra
  • Rdeče zelena
  • Rdeča Modra
  • Zelena modra
  • Rdeča Zelena Modra

6. Vodoodpornost IP65

The projector body is designed with an IP65 waterproof rating, ensuring reliable performance in various weather conditions such as snow, rain, dust, and intense sunlight. It is cold-proof, operating effectively from -30°F to 104°F.

Minetom laser light projector operating outdoors in both rain and snow, demonstrating its IP65 waterproof and cold-proof capabilities.

Image: The projector operating in rainy and snowy conditions, highlighting its IP65 waterproof and cold-proof features.

7. Coverage Area

The projector can cover a significant area, illuminating indoor ceilings, walls, or outdoor walls, gardens, lawns, trees, and rooftops. From a distance of 32.8 feet, it can cover approximately 3229.17 square feet.

Diagram showing the Minetom laser light projector's coverage area increasing with distance, from 226 sq ft at 10 ft to 3541 sq ft at 40 ft.

Image: Coverage area chart illustrating how the projected area expands with increased distance from the surface.

8. Vzdrževanje

  • Čiščenje: Gently wipe the projector lens and body with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Shranjevanje: Ko projektorja ne uporabljate, ga shranite na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
  • Pregled kabla: Periodically check the power cord and adapter for any signs of damage. Discontinue use if damage is found.

9. Odpravljanje težav

Pogoste težave in rešitve
Težavarešitev
Projektor se ne vklopi.
  • Prepričajte se, da je napajalnik pravilno priključen v delujočo vtičnico.
  • Check if the remote control batteries are correctly installed and not depleted.
  • Press the ON/OFF button on the remote.
Daljinski upravljalnik se ne odziva.
  • Replace the remote control batteries (2*AAA, not included).
  • Prepričajte se, da med daljinskim upravljalnikom in projektorjem ni ovir.
  • Confirm you are within the remote's operating range.
Svetlobni izhod je šibek ali neenakomeren.
  • Očistite lečo projektorja, če je videti umazana.
  • Ensure the projector is not operating in extreme temperatures outside its specified range.
Multiple projectors interfere with each other.
  • This can occur with multiple RF remote-controlled devices. Try to operate one projector at a time, or position them further apart.

10. Specifikacije

FunkcijaPodrobnost
Številka modelaBL-HW02
ZnamkaMinetom
barvaRdeča Zelena Modra
MaterialPlastika
Vrsta zaključkaProjektor
Vrsta svetlobnega viraSvetleča dioda
Vir napajanjaElektrični na kabel
Vrsta namestitveTalni nosilec, stenski nosilec
Dimenzije izdelka2.75 cm D x 2.75 cm Š x 11.02 cm V
Teža predmeta14 unč
Kot snopa120 stopinj
Ocena vodotesnostiIP65
Delovna temperatura-30°F do 104°F
Coverage Area (approx.)3229.17 sq ft at 32.8 ft distance

11. Garancija in podpora

For warranty information or technical support, please refer to the contact details provided at the point of purchase or visit the official Minetom webspletno mesto. Shranite račun kot dokazilo o nakupu.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.