Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your BLNAN 8.7 Inch Motion Sensor LED Flush Mount Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.
Kaj je v škatli
- Motion Sensor Ceiling Light (x4)
- Montažna oprema
- Navodila za uporabo
Varnostne informacije
OPOZORILO: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper wiring can cause electric shock or fire.
- Ensure the power supply is OFF before installation.
- Namestitev naj opravi usposobljen električar, če niste seznanjeni z električnimi napeljavami.
- Do not install on a dimmable circuit. This fixture is non-dimmable.
- Ta izdelek je zasnovan samo za uporabo v zaprtih prostorih.
- Ne spreminjajte svetilke ali njenih komponent.
Nastavitev in namestitev
The BLNAN Motion Sensor Ceiling Light is designed for easy hardwired installation on ceilings or walls.
Koraki pred namestitvijo
- Izklopite napajanje: Ensure the power to the installation area is completely off at the circuit breaker.
- Izberite barvno temperaturo: Before mounting, locate the toggle switch on the light fixture (labeled C, N, W). Select your desired color temperature: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cold White). This setting cannot be changed after installation without dismounting the fixture.
Navodila za montažo
- Pritrdite montažni nosilec: Secure the plastic mounting bracket to your existing junction box. The bracket is compatible with junction boxes having screw holes 2.75 to 3.7 inches apart.
- Povežite ožičenje: Use the included wire nuts to connect the fixture's wires to your household wiring (Black to Black, White to White, Ground to Ground). The fixture includes a hanging rope for temporary support during wiring.
- Varna naprava: Align the light fixture with the plastic bracket and rotate it clockwise until it locks securely into place.
Videoposnetek namestitve
Video 1: BLNAN Motion Sensor Ceiling Light Installation and Features. This video demonstrates the installation process and highlights key features of the BLNAN motion sensor ceiling light.
Navodila za uporabo
Your BLNAN Motion Sensor Ceiling Light features adjustable operating modes and hold times.
Načini delovanja
Locate the mode switch next to the motion sensor on the fixture. Slide the switch to select one of the three operating modes:
- AUTO Mode (Motion and Light Sensor): The light activates only when motion is detected in dark conditions. It will not turn on during daylight hours.
- ON Mode (Constant Light): The light remains continuously on, regardless of motion or ambient light conditions.
- G Mode (Only Motion Sensor): The light activates when motion is detected, functioning in both day and night conditions.
Hold Time Settings
The light features a switch to adjust how long the light stays on after motion is no longer detected. Select from 30 seconds, 120 seconds, or 180 seconds.
Zaznavanje senzorja gibanja
The built-in PIR infrared motion detector has a detection angle of up to 120° and a detection range of 10-20 feet (semidiameter). The recommended mounting height is 8-11.5 feet for optimal performance.
Vzdrževanje
To ensure the longevity and optimal performance of your BLNAN Motion Sensor Ceiling Light, follow these simple maintenance guidelines:
- Čiščenje: Pred čiščenjem izključite napajanje. Obrišite napravo z mehko, suho ali rahlo vlažno krpo.amp krpo. Ne uporabljajte agresivnih kemikalij, abrazivnih čistil ali topil, saj lahko poškodujejo površino ali električne komponente.
- Pregled: Periodically check for any loose wiring or damage to the fixture. If any issues are found, disconnect power and consult a qualified electrician.
- Zamenjava žarnice: This LED fixture does not require bulb replacement. The LEDs are integrated and designed for long-term use.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Luč se ne vklopi. | No power supply. Incorrect wiring. Mode switch set to AUTO in bright conditions. | Check circuit breaker. Verify wiring connections. Switch to ON or G mode to test. |
| Senzor gibanja ne zaznava. | Ovira v območju senzorja view. Incorrect mode setting. Sensor malfunction. | Ensure clear path to sensor. Set to AUTO or G mode. Contact support if issue persists. |
| Luč se naključno prižge. | Sensor detecting subtle movements (e.g., drafts, small pets). Sensor sensitivity. | Ensure fixture is installed in a stable location. Consider adjusting sensor placement if possible. |
| Light stays on too long/short. | Incorrect hold time setting. | Adjust the hold time switch to your desired duration (30s, 120s, 180s). |
Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Znamka | BLNAN |
| Ime modela | Ceiling Light (LS-CL-G18W-M-S) |
| Dimenzije izdelka | 8.7 cm D x 8.7 cm Š x 0.98 cm V |
| Barvna temperatura | 3000K, 4000K, 5000K (izbirno) |
| Svetlost | 1800 lumnov |
| Wattage | 18 vatov |
| voltage | 120 volta |
| Vir napajanja | Električni z žico (fiksno ožičen) |
| Vrsta namestitve | Flush Mount (Ceiling or Wall) |
| Senzor gibanja | PIR Infrared, 120° Detection Angle, 10-20 ft Range |
| Posebne lastnosti | 3 Color Temperatures, Energy Efficient, Motion Sensor, Adjustable Timer |
| Notranja/zunanja uporaba | Notranja |
| Material | Plastika |
| Vrsta zaključka | Mat |
Informacije o garanciji
BLNAN products are manufactured to high-quality standards. For specific warranty details, please refer to the documentation included with your purchase or contact BLNAN customer support. This warranty typically covers defects in materials and workmanship under normal use.
Podpora uporabnikom
If you have any questions, require assistance with installation, or encounter any issues with your BLNAN Motion Sensor Ceiling Light, please contact our customer support team. Contact information can typically be found on the product packaging or the official BLNAN webmesto.