1. Varnostne informacije
Please read all safety instructions carefully before using the SYNCWIRE SW2002 Portable Tire Inflator. Failure to follow these instructions may result in product damage, property damage, or personal injury.
- Hraniti izven dosega otrok.
- Do not operate the inflator continuously for more than 10 minutes. Allow a 10-minute cool-down period between uses to prevent overheating.
- Ensure the correct pressure unit (PSI, KPA, BAR, KG/CM²) is selected for your item before inflation.
- Med delovanjem ne puščajte napihovalnika brez nadzora.
- Avoid exposing the inflator to rain or moisture.
- Do not attempt to disassemble or modify the device. Contact customer support for assistance.
- Uporabljajte samo priloženi polnilni kabel in dodatno opremo.
- Ko napihovalnika ne uporabljate, ga shranjujte na hladnem in suhem mestu.
2. Vsebina paketa
Preverite, ali so v paketu vsi elementi:
- 1x SYNCWIRE SW2002 Portable Tire Inflator
- 1x zračna cev
- 1x polnilni kabel USB-C
- 1x vrečka za shranjevanje
- 4x Nozzle Adapters (Ball Needle, Bicycle Valve Nozzle, Air Pillow Nozzle, Swimming Ring Nozzle)
- 4x Car Tire Valve Caps
- 1x Uporabniški priročnik (ta dokument)
- 1x Warranty Policy
Image: All components included in the SYNCWIRE SW2002 package, laid out neatly.
3. Izdelek je končanview
3.1 Ključne lastnosti
- High-Speed Inflation: Inflates tires up to 150 PSI, 2X faster than standard inflators.
- Velik LCD zaslon: Ultra-large, clear display shows real-time and preset pressure values, visible day and night.
- Accurate Digital Gauge: High-precision sensor provides readings within ±0.5 PSI.
- Samodejni izklop: Samodejno ustavi polnjenje, ko je dosežen prednastavljeni tlak.
- Več načinov napihovanja: 5 preset modes for Car, Motorcycle, Bike, Ball, and a customizable mode.
- Vsestranske enote: Supports PSI, KPA, BAR, and KG/CM².
- Vgrajena LED svetilka: Zagotavlja osvetlitev za uporabo v slabih svetlobnih pogojih.
- Power Bank za nujne primere: USB output port allows charging of mobile devices.
- Kompakten in prenosen: Zasnovan za enostavno shranjevanje in transport.
3.2 Postavitev naprave
Slika: spredaj view of the inflator showing the LCD screen, mode selection, power, and +/- buttons.
- LCD zaslon: Shows current and target pressure, battery level, and selected mode.
- Gumb za način: Cycles through inflation modes (Car, Motorcycle, Bike, Ball, Custom).
- Gumb za vklop: Vklopi/izklopi napravo in zažene/ustavi napihovanje.
- Gumbi +/-: Adjusts preset pressure values.
- Gumb enote: Changes pressure units (PSI, KPA, BAR, KG/CM²).
- LED gumb za luč: Vklopi/izklopi vgrajeno svetilko.
- Priključek za zračno cev: Connects the air hose to the inflator.
- Vhod USB-C: Za polnjenje napihovalnika.
- Izhod USB-A: Za uporabo napihovalnika kot powerbanka.
4. Nastavitev
4.1 Charging the Inflator
- Connect the supplied USB-C charging cable to the USB-C input port on the inflator.
- Drugi konec kabla priključite na združljiv napajalnik USB (ni priložen) ali vrata USB.
- The battery indicator on the LCD display will flash during charging and become solid when fully charged.
- A full charge typically takes 2-3 hours from 2 bars to 3 bars. The device cannot be used while charging.
4.2 Pritrditev zračne cevi in šobe
- Screw the air hose securely into the air hose port on the top of the inflator.
- Select the appropriate nozzle adapter for the item you wish to inflate.
- Screw the chosen nozzle adapter onto the free end of the air hose.
5. Navodila za uporabo
5.1 Vklop/izklop
- Pritisnite in držite Gumb za vklop for 3 seconds to turn the inflator on.
- The LCD display will light up, showing the current battery level and default mode.
- Za izklop pritisnite in držite Gumb za vklop for 3 seconds again, or the device will automatically shut off after a period of inactivity.
5.2 Selecting Inflation Mode and Unit
Image: The inflator's LCD screen displaying various preset inflation modes.
- Po vklopu pritisnite gumb Gumb za način to cycle through the preset inflation modes: Car, Motorcycle, Bike, Ball, and Custom.
- Each mode has a default pressure range. For example, Car mode is typically 26-50 PSI.
- Pritisnite Gumb enote to switch between pressure units: PSI, KPA, BAR, KG/CM².
5.3 Nastavitev želenega tlaka
- Once a mode is selected, the preset pressure value will flash on the LCD.
- Uporabite + in - buttons to adjust the desired target pressure.
- Refer to your vehicle's or item's manufacturer recommendations for correct pressure values.
5.4 Začetek in ustavitev inflacije
Image: The inflator actively inflating a car tire, demonstrating its speed.
- Connect the nozzle adapter to the valve stem of the item you are inflating. Ensure a tight seal.
- Pritisnite Gumb za vklop to start inflation. The real-time pressure will be displayed.
- Napihovalnik se bo samodejno ustavil, ko bo dosežen prednastavljeni tlak.
- To manually stop inflation, press the Gumb za vklop znova.
- Carefully disconnect the nozzle from the valve stem. A small amount of air leakage is normal.
5.5 Uporaba LED svetilke
- Pritisnite Gumb za LED lučko da prižgete svetilko.
- Press again to cycle through different light modes (e.g., steady, SOS, flashing).
- Pritisnite tretjič, da izklopite svetilko.
5.6 Funkcija prenosne baterije
Image: The inflator connected via USB to charge a smartphone, highlighting its power bank capability.
- Connect your device's charging cable to the USB-A output port on the inflator.
- The inflator will begin charging your device. This function is useful for emergencies.
6. Vzdrževanje
6.1 Čiščenje
- Ensure the inflator is turned off and disconnected from any power source before cleaning.
- Obrišite zunanjost z mehko damp krpo. Ne uporabljajte močnih kemikalij ali abrazivnih čistil.
- Keep the air intake and exhaust vents clear of dust and debris.
6.2 Shranjevanje
- Store the inflator and its accessories in the provided storage bag.
- Napravo hranite na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
- For prolonged storage, charge the inflator every 3-6 months to maintain battery health.
7. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Napihovalnik se ne vklopi. | Nizka baterija. | Popolnoma napolnite napihovalnik. |
| Napihovalnik se predčasno ustavi. | Preset pressure reached. | This is normal operation. Check the pressure reading. |
| Pregrevanje. | Allow the device to cool down for 10 minutes before resuming use. | |
| Slow inflation or no air output. | Air hose or nozzle not securely connected. | Prepričajte se, da so vse povezave tesne. |
| Incorrect nozzle adapter used. | Select the correct adapter for the item. | |
| Netočne meritve tlaka. | Incorrect pressure unit selected. | Press the Unit Button to select the desired unit (PSI, KPA, BAR, KG/CM²). |
| Oviranje senzorja. | Ensure the air hose and valve are clear of debris. |
8. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Ime modela | SW2002 |
| Znamka | SYNCWIRE |
| Največji tlak | 150 PSI |
| Zmogljivost pretoka zraka | 18 litrov na minuto |
| Vir napajanja | Napajanje na baterije |
| Način delovanja | Samodejno |
| Dolžina cevi | 9.05 palcev |
| Teža predmeta | 1.05 funta |
| Dimenzije izdelka (DxŠxV) | 5.29 cm x 2.93 cm x 1.85 cm |
| Material | Durable, Reliable |
| barva | Črna |
9. Garancija in podpora
SYNCWIRE provides a 36-mesečna garancija for the SW2002 Portable Tire Inflator.
For any inquiries or assistance, please contact SYNCWIRE customer service. We are committed to providing fast and friendly support within 24 hours for all your questions and concerns.
Please refer to the included Warranty Policy document for detailed terms and conditions.