MDCMDCM Solar Motion Sensor Outdoor Lights

Uvod

Thank you for choosing the MDCMDCM Solar Motion Sensor Outdoor Lights. This manual provides essential information for the proper installation, operation, and maintenance of your new solar lights. Designed for outdoor use, these lights offer bright, motion-activated illumination for enhanced security and visibility in areas such as gardens, yards, patios, and pathways. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.

Kaj je v škatli

Ob razpakiranju se prepričajte, da so vsi spodaj navedeni predmeti prisotni in v dobrem stanju:

• 2 x MDCMDCM Solar Motion Sensor Outdoor Lights
• 2 x stenski nosilci
• Mounting Screws and Wall Plugs (typically 8 screws and 8 plugs)
• Uporabniški priročnik
• Remote Controls (quantity may vary based on pack size, typically one per light or one for the set)

Ključne značilnosti

• Visoka Svetlost: 3000 Lumens output with 236 super bright LEDs for extensive illumination.
• Nastavljiva oblika: Three adjustable heads allow for flexible lighting direction and a 270° wide-angle lighting area.
• Dvojni senzorji gibanja: Upgraded 2 smart PIR motion sensors provide a 180° detection angle within a range of 0-32 feet, offering wider and more sensitive coverage.
• Trije načini osvetlitve: Customizable lighting modes to suit various needs (details in Operating Instructions).
• Trpežna in odporna na vremenske vplive: IP65 waterproof rating and high-strength ABS material ensure durability against various weather conditions (waterproof, heat-resistant, frost-resistant).
• Učinkovito sončno polnjenje: Monocrystalline silicon glass panels with up to 50% conversion rate for efficient daytime charging.
• Dolgotrajna baterija: Built-in 2000mAh large capacity battery for extended operation.
• Dolga življenjska doba: Designed for a lifespan of over 50,000 hours.

Nastavitev in namestitev

Installation is designed to be quick and easy, requiring no wiring. Follow these steps for optimal performance:

1. Izberite lokacijo: Select an outdoor location that receives direct sunlight for at least 6-8 hours daily to ensure the solar panel charges effectively. The recommended installation height is approximately 6.5 feet.
2. Namestite nosilec: Use the provided screws and wall plugs to securely attach the wall bracket to your desired surface. Ensure the bracket is level.
3. Pritrdite luč: Slide the solar light unit onto the mounted wall bracket until it clicks securely into place.
4. Prilagodite luči in sončno celico: Adjust the three light heads to cover the desired illumination area. Position the solar panel to face the sun for maximum exposure throughout the day.

Videoposnetek namestitve

Video 1: This video demonstrates the unboxing and installation process for the MDCMDCM Solar Motion Lights Outdoor Waterproof.

Navodila za uporabo

The solar light features three distinct lighting modes, which can be selected using the included remote control or the button on the unit. Ensure the light is turned on before selecting a mode.

• Mode 1 (Motion Activated 100% Brightness): The light remains OFF at night until motion is detected. Upon detection, it illuminates at 100% brightness for approximately 20 seconds, then turns OFF again.
• Mode 2 (Always 30% Brightness): The light stays ON at 30% brightness throughout the night, without motion sensor activation.
• Mode 3 (10% Brightness + Motion Activated 100% Brightness): The light stays ON at a dim 10% brightness at night. When motion is detected, it brightens to 100% for approximately 20 seconds, then returns to 10% brightness.

Vzdrževanje

To ensure your MDCMDCM Solar Motion Sensor Outdoor Lights continue to function effectively, follow these simple maintenance guidelines:

• Očistite sončno ploščo: Sončno celico redno obrišite z mehko krpoamp krpo za odstranjevanje prahu, umazanije, listja ali snega. Čista plošča zagotavlja maksimalno absorpcijo sončne svetlobe in učinkovito polnjenje baterije.
• Preverite namestitev: Periodically inspect the mounting screws and bracket to ensure the light remains securely attached to the surface. Tighten any loose screws as needed.
• Odstranite ovire: Ensure no new obstructions (e.g., growing branches, new structures) are blocking direct sunlight from reaching the solar panel or interfering with the motion sensor's detection range.

Odpravljanje težav

If your solar light is not performing as expected, consider the following common issues and solutions:

• Light Not Turning On at Night:
  • Ensure the light is switched ON.
  • Verify the solar panel is receiving sufficient direct sunlight (6-8 hours) during the day. Relocate if necessary.
  • Check if the battery is fully charged. Allow for a full day of charging before first use or after prolonged storage.
  • Confirm the selected operating mode is appropriate for your needs.
• Motion Sensor Not Detecting:
  • Ensure the motion sensors are clean and free from obstructions.
  • Check the detection range and angle. The dual sensors offer 180° detection up to 32 feet.
  • Verify the light is in Mode 1 or Mode 3 for motion activation.
• Svetloba je šibka ali utripa:
  • The battery may not be fully charged. Ensure adequate sunlight exposure.
  • Očistite sončno ploščo, da izboljšate učinkovitost polnjenja.
  • Ekstremne temperature lahko vplivajo na delovanje baterije.

Specifikacije

Garancija in podpora

MDCMDCM provides a Omejena garancija for this product. Additionally, your purchase is backed by a 365-dnevna garancija, ensuring that your light will not break or stop working under normal use conditions. For any questions, technical support, or warranty claims, please refer to the contact information provided in the user manual included in your package or visit the official MDCMDCM store on Amazon.