Karlsson Spry Square LED Alarm Clock Instruction Manual

1. Izdelek je končanview

The Karlsson Spry Square LED Alarm Clock (Model KA5982GY) is a compact digital alarm clock designed for clear time display and reliable alarm functionality. This manual provides detailed instructions for its setup, operation, and maintenance.

Slika 1: Spredaj view of the Karlsson Spry Square LED Alarm Clock, showing the time display.

2. Vsebina paketa

• Karlsson Spry Square LED Alarm Clock (Model KA5982GY)
• USB Power Cable (DC 5V)
• Navodila za uporabo

Note: Batteries (if required for backup) and a USB power adapter are typically not included and must be purchased separately.

3. Nastavitev

3.1 Napajanje naprave

The alarm clock can be powered via a DC 5V USB connection or by batteries for backup. For continuous operation, it is recommended to use the USB power cable.

1. Priključite napajanje USB: Insert the small end of the provided USB cable into the DC 5V port on the back of the alarm clock. Connect the larger end to a USB power adapter (not included) or a powered USB port.
2. Namestitev baterij (neobvezno rezervno): Open the battery compartment cover on the back of the clock. Insert the appropriate batteries (e.g., AAA, type not specified, refer to compartment markings) ensuring correct polarity (+/-). Close the cover securely. Batteries provide backup power in case of a power outage, preserving time settings.

Slika 2: Zadaj view of the alarm clock, highlighting the DC 5V input, battery compartment, and control buttons (SET, UP, DOWN, RST).

3.2 Začetna nastavitev časa

Upon first power-up or after a full power reset, the display may show a default time or flash. Follow these steps to set the current time:

1. Pritisnite in držite NASTAVI button on the back of the clock until the hour digits begin to flash.
2. Uporabite UP in DOL gumbi za nastavitev ure.
3. Pritisnite NASTAVI Ponovno pritisnite gumb , da potrdite uro in se premaknete na nastavitev minut. Številke minut bodo utripale.
4. Uporabite UP in DOL gumbe za nastavitev minut.
5. Pritisnite NASTAVI button one more time to confirm the minutes and exit time setting mode.

4. Navodila za uporabo

4.1 Nastavitev alarma

Če želite nastaviti alarm:

1. V običajnem prikazu časa pritisnite NASTAVI button once (do not hold). The display will show the current alarm time or 'OFF'.
2. Medtem ko je prikazan čas alarma, pritisnite in držite NASTAVI gumb, dokler ne utripajo številke ure budilke.
3. Uporabite UP in DOL gumbe za nastavitev ure budilke.
4. Pritisnite NASTAVI again to confirm the alarm hour and move to the alarm minute setting.
5. Uporabite UP in DOL gumbe za nastavitev minut alarma.
6. Pritisnite NASTAVI one more time to confirm the alarm minutes and activate the alarm. An alarm indicator (e.g., a small bell icon or dot) should appear on the display.

4.2 Turning the Alarm On/Off

To toggle the alarm on or off without changing the set time:

1. V običajnem prikazu časa pritisnite NASTAVI button once to show the alarm time.
2. Ko je prikazan čas alarma, pritisnite UP or DOL button to toggle the alarm function on or off. The alarm indicator will appear or disappear accordingly.

4.3 Funkcija dremeža

When the alarm sounds, press any button (other than RST or the main power button if present) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typical snooze duration is 5-9 minutes, specific duration not provided). The snooze indicator may flash on the display.

4.4 Ustavitev alarma

To stop the alarm completely when it is sounding, press the RST button or unplug the power. The alarm will reset for the next day at the set time.

5. Vzdrževanje

5.1 Čiščenje

To maintain the appearance of your alarm clock:

• Obrišite površino z mehko, suho krpo.
• Za trdovratne madeže rahlo obrišiteampkrpo sperite z vodo. Izogibajte se uporabi abrazivnih čistil, topil ali kemičnih razpršil, saj lahko poškodujejo premaz.
• Ensure no liquid enters the device through openings.

5.2 Zamenjava baterije

If using batteries for backup, replace them when the display becomes dim or if the clock loses time during power outages. Refer to section 3.1 for battery installation instructions.

6. Odpravljanje težav

• Zaslon je prazen ali zatemnjen:
  - Ensure the USB power cable is securely connected to both the clock and a working power source.
  - If using batteries, check if they are correctly installed and not depleted. Replace if necessary.
• Clock loses time:
  - If powered by USB, ensure a stable power supply.
  - If relying on battery backup, replace the batteries.
• Alarm se ne oglasi:
  - Verify that the alarm is set and activated (check for the alarm indicator on the display). Refer to section 4.1 and 4.2.
  - Ensure the volume is not set to zero (if applicable, though this model typically has a fixed alarm sound).
• Gumbi se ne odzivajo:
  - Try pressing the RST button on the back with a thin object (like a paperclip) to perform a soft reset. This may clear temporary issues without losing settings if backup batteries are present.
  - Disconnect and reconnect the power supply.

7. Specifikacije

8. Garancija in podpora

Warranty information for the Karlsson Spry Square LED Alarm Clock is typically provided at the point of purchase or included with the product packaging. Please retain your proof of purchase for warranty claims.

For technical support, service, or further inquiries, please contact Karlsson customer service directly through their official webspletno mesto ali prodajalec, pri katerem je bil izdelek kupljen.