1. Uvod
This manual provides essential information for the safe installation, operation, and maintenance of your Onforu 100W LED Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
2. Varnostne informacije
OPOZORILO: Nevarnost električnega udara. Pred namestitvijo ali servisiranjem izklopite varovalko ali odklopnik.
- Ensure the power supply is turned off before attempting any installation, maintenance, or adjustment.
- Installation should be performed by a qualified electrician or a person with electrical knowledge.
- This product is designed for outdoor use and is IP65 waterproof rated. However, ensure all connections are properly sealed to maintain water resistance.
- Do not install near flammable materials or in areas with explosive atmospheres.
- Ne glejte neposredno v prižgan LED vir svetlobe, saj lahko to poškoduje oči.
- Prepričajte se, da površina za montažo lahko prenese težo naprave.
3. Vsebina paketa
Pred začetkom namestitve preverite, ali so prisotne vse komponente:
- LED Security Light Fixture (Model BDB100G-3)
- Pritrdilni material (vijaki, matice)
- Navodila za uporabo
4. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Številka modela | BDB100G-3 |
| Wattage | 100 W |
| Svetlost | 9000 lumnov |
| Barvna temperatura | 6000K (dnevno bela) |
| voltage | 120 volta |
| Kot senzorja gibanja | 180° |
| Obseg zaznavanja gibanja | 5 m - 22 m |
| Prilagoditev časa osvetlitve | 10 sekund - 7 minut |
| Ocena vodoodpornosti | IP65 |
| Material | Die-cast Aluminum, Plastic |
| Dimenzije (D x Š x V) | 15.3" x 8.2" x 4.7" (38.8 cm x 20.8 cm x 11.9 cm) |
| Teža | 4.4 lbs (2 kg) |
| Vrsta namestitve | Wall Mount & Soffit Mount |
| Ideal Mounting Height | 3 m - 5 m |
5. Nastavitev in namestitev
Before installation, ensure the power is OFF at the circuit breaker.
5.1 Komponente nadview
Slika 5.1: Razstavljeno view of the security light, highlighting the 100W LED beads and high-precision light transmission design.
5.2 Montaža napeljave
- Pripravite montažno površino: Choose a suitable location, ideally between 10 ft and 16.4 ft (3m - 5m) from the ground, ensuring the motion sensor has an unobstructed view of the desired detection area.
- Pritrdite montažni nosilec: Secure the provided mounting bracket to the junction box using the included screws.
- Žične povezave: Connect the household wiring to the fixture's wires. Typically, this involves:
- Črna (v živo) do črne (v živo)
- Bela (nevtralna) do bele (nevtralne)
- Green/Bare Copper (Ground) to Green (Ground)
- Zavarujte napeljavo: Carefully align the fixture with the mounting bracket and secure it in place. Ensure no wires are pinched.
Image 5.2: Installation diagram illustrating the steps to mount the security light to a wall or soffit.
Image 5.3: Detailed diagram showing the physical dimensions of the light heads and base, along with the standard three-wire electrical connections.
5.3 Nastavitev svetlobnih glav in senzorja
The three light heads can be adjusted independently to cover a wide area. The motion sensor can also be angled for optimal detection.
Image 5.4: The adjustable design allows for precise aiming of the light heads and motion sensor to cover a 270-degree detection zone.
6. Navodila za uporabo
Once installed and power is restored, the light will enter a warm-up period (approximately 30-60 seconds) during which it may turn on and off. After this, it will operate according to the sensor settings.
6.1 Motion Sensor Settings
The motion sensor has three adjustable dials:
Image 6.1: The motion sensor features three adjustable dials for customizing detection parameters.
- DISTANCE (SENS): Adjusts the motion detection sensitivity and range from 16.4 ft to 72 ft. Turn clockwise for higher sensitivity/longer range, counter-clockwise for lower sensitivity/shorter range.
- ČAS: Sets how long the light remains on after motion is detected, ranging from 10 seconds to 7 minutes. Turn clockwise for longer illumination, counter-clockwise for shorter.
- LUX (Day/Night Mode): Determines the ambient light level at which the sensor becomes active.
- Day Mode (Sun icon): Motion detection works during both day and night.
- Night Mode (Moon icon): Motion detection works only at night or in low-light conditions.
6.2 Optimalna zmogljivost
Image 6.2: The motion sensor provides versatile detection for areas like driveways, with a wide sensing angle.
Image 6.3: The light provides super bright and ultra-wide illumination, covering a significant area.
7. Vzdrževanje
The Onforu security light is designed for minimal maintenance. Regular cleaning can help maintain optimal performance.
7.1 Čiščenje
- Ensure the power is OFF before cleaning.
- Obrišite napravo z mehko krpoamp krpo. Ne uporabljajte abrazivnih čistil ali topil, saj lahko poškodujejo površino ali lečo.
- Lečo senzorja gibanja naj bo čista in brez ovir (npr. umazanije, pajkovwebs) za zagotovitev pravilnega delovanja.
7.2 Odpornost na vremenske vplive
Image 7.1: The IP65 waterproof rating ensures the light functions reliably in rain, sleet, snow, and sun.
8. Odpravljanje težav
Če imate težave z varnostno lučko, si oglejte naslednje pogoste težave in rešitve:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Luč se ne vklopi. | Brez napajanja. LUX setting is too low (Night Mode during daytime). Senzor gibanja je blokiran ali pokvarjen. | Preverite odklopnik in ožičenje. Adjust LUX dial to Day Mode (Sun icon) for testing. Clear any obstructions from the sensor. Ensure sensor is aimed correctly. |
| Svetloba neprekinjeno sveti. | Neprekinjeno gibanje v območju zaznavanja. Nastavitev ČASA je predolga. Okvara senzorja. | Ensure no constant movement (e.g., tree branches, pets) is triggering the sensor. Nastavite gumb TIME na krajši čas. Če težava vztraja, se obrnite na podporo strankam. |
| Luč se prižiga prepogosto ali premalo. | DISTANCE (SENS) setting is too high/low. Sensor placement or angle is not optimal. Environmental factors (e.g., heat sources, reflective surfaces). | Adjust DISTANCE dial to desired sensitivity. Reposition or re-angle the sensor to cover the intended area and avoid unwanted triggers. Ensure the sensor is not pointed at direct heat sources or highly reflective surfaces. |
| Svetlobni izhod je šibek ali neenakomeren. | Nihanje moči. Damaged LED beads. | Ensure stable power supply. If individual LED beads are visibly not working, the unit may require replacement. |
| Fixture feels wobbly after installation. | Ohlapna montaža. Main connection to base plate not fully secured. | Ensure all mounting screws are tightened. Verify the main light assembly is firmly attached to the base plate. |
9. Garancija
This Onforu product is covered by a 2-letna omejena garancija od datuma nakupa. Ta garancija krije napake v materialu in izdelavi pri normalni uporabi. Ne krije škode, ki nastane zaradi nepravilne namestitve, nesreče, napačne uporabe, zlorabe ali nepooblaščenih sprememb.
Za garancijske zahtevke shranite dokazilo o nakupu.
10. Podpora strankam
If you have any questions, require technical assistance, or need to make a warranty claim, please contact Onforu customer support through the retailer's platform or visit the official Onforu webspletno mesto za kontaktne podatke.
Spletna podpora: Visit the Onforu Store on Amazon