OLTEANP 2000W Sump Pump Battery Backup System Instruction Manual

1. Uvod

This manual provides comprehensive instructions for the safe installation, efficient operation, and proper maintenance of your OLTEANP 2000W Sump Pump Battery Backup System. This system is designed to provide uninterrupted power to your sump pump during electrical outages, ensuring your basement remains dry. Please read this manual thoroughly before installation and operation to ensure optimal performance and safety.

2. Varnostne informacije

• Always disconnect the system from all power sources before performing any maintenance or installation.
• Poskrbite za ustrezno prezračevanje okoli enote, da preprečite pregrevanje.
• Do not expose the unit to water, rain, or excessive moisture.
• Use appropriate personal protective equipment (PPE) during installation, especially when handling batteries.
• Connect the system only to compatible battery types as specified in this manual.
• Ensure all wiring connections are secure and correctly polarized to prevent electrical hazards.
• Otroke in nepooblaščene osebe držite stran od sistema.

3. Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• OLTEANP 2000W Sump Pump Battery Backup System (Main Unit)
• Battery Cables (Red and Black)
• Uporabniški priročnik (ta dokument)
• Remote Controller with LCD Screen
• Pribor za montažo (vijaki, sidra)
• Napajalni kabel
• Small Wrench (for terminals)

Figure 3.1: The OLTEANP 2000W Sump Pump Battery Backup System with its remote control, battery cables, power cable, and small wrench.

4. Izdelek je končanview

The OLTEANP 2000W Sump Pump Battery Backup System integrates a pure sine wave inverter, a 25A battery charger, and an automatic transfer switch into one unit. It features multiple output ports and a remote LCD controller for monitoring.

4.1 Funkcije sprednje plošče

• 3 AC vtičnici: For connecting your sump pump and other AC devices.
• Vrata USB (5 V/3.1 A): Za polnjenje majhnih elektronskih naprav.
• Type-C Port (30W): For faster charging of compatible devices.
• AC Charge Input: Connects to grid power for charging the battery and powering loads.
• Battery Type Selection Switches (DIP Switches): Allows selection of battery chemistry (GEL, AGM/SLA, Flooded/Wet, LiFePO4).
• Stikalo za vklop/izklop: Glavno stikalo za pretvornik.
• Fault LED (Red): Označuje sistemsko napako.
• LED za napajanje (zelena): Indicates the system is powered on.
• Charge Full LED (Green): Označuje, da je baterija popolnoma napolnjena.
• Remote Connection Port: For connecting the LCD remote controller.
• Varovalka: Pretokovna zaščita.

Figure 4.1: Front and rear panel connections and indicators.

4.2 Remote Controller with LCD Screen

The remote controller provides real-time monitoring of the system's status, including battery voltage, izhodna voltage, power consumption, and fault indicators. This allows for convenient monitoring without direct access to the main unit.

Figure 4.2: The remote controller's LCD screen displaying operational parameters.

5. Nastavitev in namestitev

The OLTEANP Sump Pump Battery Backup System is designed for easy installation with minimal wiring. Follow these steps carefully.

5.1 Namestitev enote

The unit can be placed flat on a stable surface or wall-mounted using the fixed holes on the side. Ensure the mounting location is dry, well-ventilated, and away from flammable materials. Use appropriate screws and anchors for your wall type.

5.2 Priključitev baterije

1. Ensure the main unit is OFF before connecting batteries.
2. Povežite rdeča kabel akumulatorja do pozitivno (+) terminal of the battery and the pozitivno (+) terminal na pretvorniku.
3. Povežite črna kabel akumulatorja do negativno (-) terminal of the battery and the negativno (-) terminal na pretvorniku.
4. Tighten all connections securely using the provided wrench.
5. Pomembno: The system requires a 12V deep-cycle battery (Lithium, AGM, Flooded/Wet). Do not use non-deep-cycle batteries.

5.3 Izbira tipa baterije

Before turning on the inverter, set the DIP switches on the unit to match your battery type. Refer to the table below:

Figure 5.1: DIP switch settings for various battery chemistries.

5.4 Vhodni in izhodni priključki za izmenični tok

1. Plug the provided power cable into the AC Charge Input port on the inverter.
2. Drugi konec napajalnega kabla priključite v standardno stensko vtičnico z napetostjo 120 V AC.
3. Plug your sump pump and other desired AC devices into the 3 AC Outlets on the inverter.
4. For permanent installations, the L, N, PE terminals can be used for direct wiring to a breaker panel by a qualified electrician.

Figure 5.2: System diagram showing AC input, battery charging, and inverter output to a sump pump.

Figure 5.3: The 2000W system can power multiple sump pumps with a combined wattage under 2000W.

5.5 Videoposnetek o namestitvi

Video 5.1: Official OLTEANP video demonstrating the Sump Pump Battery Backup System installation and operation.

6. Navodila za uporabo

Once installed, the system operates largely automatically. Here's how to use and monitor it.

6.1 Vklop/izklop

• To power on the system, press the ON/OFF switch on the main unit. The green Power LED will illuminate.
• Za izklop ponovno pritisnite stikalo VKLOP/IZKLOP.

6.2 Automatic Switching (UPS Function)

When grid power is available, the system charges the connected battery and passes AC power directly to your connected devices. In the event of a power outage, the system automatically switches to battery power within 12 milliseconds, ensuring continuous operation of your sump pump. When grid power is restored, it automatically switches back to grid power and resumes charging the battery.

6.3 Monitoring with Remote Controller

The remote LCD controller provides essential information:

• Raven baterije: Displays the current charge level of the connected battery.
• DC vhod Voltage: Prikazuje voltage.
• AC izhod Voltage: Prikaže izhodno voltage supplied to your devices.
• Wattage: Prikazuje trenutno porabo energije priključenih naprav.
• Alarmi za napake: The screen will flash and display relevant fault codes if an issue occurs.

6.4 Načini delovanja

• Način polnjenja: When grid power is present, the internal 25A charger replenishes the battery.
• Inverterski način: Med izpadom močitage, the system converts DC battery power to AC power for your devices.

Video 6.1: Official OLTEANP video demonstrating the Pure Sine Wave Power Inverter with Charger in operation.

7. Vzdrževanje

Regular maintenance ensures the longevity and reliable operation of your system.

• Čiščenje: Periodically clean the exterior of the unit with a dry cloth. Ensure ventilation openings are free from dust and debris.
• Pregled baterije: Regularly check battery terminals for corrosion and ensure connections are tight. For lead-acid batteries, check electrolyte levels if applicable.
• Testiranje: Periodically test the system by temporarily disconnecting grid power to ensure the automatic switching function operates correctly.
• Shranjevanje: If storing the unit for an extended period, ensure the battery is fully charged and disconnect it from the inverter. Store in a cool, dry place.

8. Odpravljanje težav

Če naletite na težave, si oglejte naslednje pogoste težave in rešitve:

For persistent issues not covered here, please contact OLTEANP customer support.

9. Specifikacije

10. Garancija in podpora

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official OLTEANP webmesto. Shranite račun za garancijske zahtevke.