1. Uvod
The OWON HDS25 is a compact, multi-functional handheld device integrating a 2-channel oscilloscope and a 20,000-count multimeter. Designed for portability and versatility, it features a 3.5-inch LCD display, USB Type-C connectivity for charging and data transfer, and supports SCPI commands for remote control. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your HDS25 device.
2. Izdelek je končanview
2.1 Ključne lastnosti
- Funkcionalnost 3 v 1: Combines a 2-channel oscilloscope and a 20,000-count True RMS multimeter.
- Osciloskop: 25MHz bandwidth, 250MSa/s real-time sample rate, 8K record length.
- Multimeter: Mere AC/DC voltage, izmenični/enosmerni tok, upornost, kapacitivnost, dioda in prevodnost.
- Zaslon: 3.5-palčni LCD z visoko ločljivostjo.
- Povezljivost: USB Type-C for charging and PC communication, supports SCPI commands.
- Prenosljivost: Compact design with approximately 4 hours of continuous battery operation.
2.2 Komponente naprave
The following image illustrates the main components of the OWON HDS25 device:
The device features a central 3.5-inch LCD screen for waveform display and measurement readings. Below the screen are function buttons (F1-F4), mode selection buttons (Mode, CH1/2, HOR, System, Save, Auto, Trig/Δ, Power, Play/Pause), and a directional pad for navigation. At the bottom, there are input jacks for current (A, mA), common ground (COM), and voltage/resistance/capacitance (VΩ+C) measurements.
2.3 Priloženi dodatki
- USB Type-C kabel
- Oscilloscope Probes (2)
- Probe Adjustment Tool
- Merilni kabli za multimeter
- Zaščitna torba
3. Nastavitev
3.1 Polnjenje naprave
Before initial use, fully charge the device using the provided USB Type-C cable and a compatible power adapter (not included). The charging indicator on the device will show the charging status.
3.2 Priključitev sond in vodnikov
- Osciloskopske sonde: Connect the BNC connector of the oscilloscope probes to the CH1 and CH2 input ports on the top of the device. Ensure a secure connection.
- Merilni kabli multimetra: For multimeter functions, insert the red test lead into the VΩ+C jack and the black test lead into the COM jack. For current measurements, use the A or mA jacks as appropriate.
3.3 Vklop/izklop
Pritisnite in držite Moč button (usually marked with a circle and vertical line symbol) to turn the device on or off.
4. Navodila za uporabo
4.1 Splošna navigacija
- Uporabite Način button to switch between Oscilloscope and Multimeter modes.
- The directional pad (up, down, left, right) is used to navigate menus and adjust parameters.
- Gumbi F1 do F4 correspond to on-screen menu options.
- The Sistem button accesses system settings.
- The Shrani button allows saving waveforms or measurement data.
4.2 Način osciloskopa
In Oscilloscope mode, the device displays real-time waveforms. Use the following controls:
- CH1/2: Selects the active channel or displays both.
- HOR (Horizontal): Adjusts the time base (horizontal scale) of the waveform.
- Vertical Scale: Use the directional pad (up/down) to adjust the voltage scale for the selected channel.
- Trig/Δ (Trigger): Configures trigger settings (edge, level, mode) to stabilize the waveform display.
- Samodejno: Automatically adjusts vertical, horizontal, and trigger settings for a stable waveform display.
- Predvajanje/pavza: Freezes or resumes the waveform acquisition.
4.3 Način multimetra
In Multimeter mode, the device functions as a digital multimeter. Use the directional pad to select the desired measurement function (Voltage, Current, Resistance, etc.). Ensure the test leads are connected to the correct input jacks for the selected measurement type.
- voltage Measurement (V): Connect leads in parallel with the circuit.
- Current Measurement (A/mA): Connect leads in series with the circuit. Ensure correct jack selection (A or mA) based on expected current.
- Merjenje upornosti (Ω): Connect leads across the component when power is off.
- Continuity/Diode: For checking circuit continuity or diode function.
- Merjenje kapacitivnosti (F): Connect leads across the capacitor when power is off.
5. Vzdrževanje
5.1 Čiščenje
Zunanjost naprave obrišite z mehko krpoamp cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off and disconnected from all power sources and measurement circuits before cleaning.
5.2 Skrb za baterije
To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, especially if it will be stored for an extended period. Store the device in a cool, dry place.
5.3 Shranjevanje
When not in use, store the HDS25 in its protective bag in a clean, dry environment away from direct sunlight, extreme temperatures, and high humidity.
6. Odpravljanje težav
Če imate težave z napravo OWON HDS25, si oglejte naslednje pogoste težave in rešitve:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Naprava se ne vklopi. | Low battery or faulty power button. | Napravo polnite vsaj 30 minut. Če se še vedno ne odziva, se obrnite na podporo. |
| No waveform displayed in Oscilloscope mode. | Incorrect probe connection, wrong vertical/horizontal scale, or trigger settings. | Ensure probes are securely connected. Press the Avto button. Adjust vertical (voltage) and horizontal (time) scales. Check trigger level. |
| Multimeter readings are inaccurate or zero. | Incorrect lead connection, wrong measurement function selected, or open circuit. | Verify test leads are in the correct jacks for the selected function. Ensure proper connection to the circuit. Check for open circuits. |
| Naprava se zamrzne ali se ne odziva. | Napaka v programski opremi. | Perform a soft reset by holding the power button until the device turns off, then restart. If the issue persists, contact support. |
7. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Model | HDS25 |
| Pasovna širina | 25 MHz |
| Kanali | 2 |
| Sample Oceni | 250 MSa/s |
| Dolžina zapisa | 8K |
| Štetje multimetra | 20,000 |
| Zaslon | 3.5-palčni LCD |
| Povezljivost | USB Type-C (charging & data) |
| Življenjska doba baterije | Pribl. 4 ur |
| Certifikati | CE, RoHS, UL |
| Vključeni elementi | USB cable, probes, probe adjustment tool, multimeter leads, bag |
8. Garancija in podpora
8.1 Informacije o garanciji
The OWON HDS25 comes with a 3-letna garancija proizvajalca for the main unit and a 1-letna garancija for included accessories. Please retain your proof of purchase for warranty claims.
8.2 Podpora strankam
For technical assistance, troubleshooting, or warranty inquiries, please contact OWON customer support. You can also find the latest user manual and support resources on the official OWON webspletno mesto (owon.co.jp) or on the product page where you purchased the device.