BN-LINK Countdown Timer Switch (Model CP-U211C) User Manual

Uvod

Thank you for choosing the BN-LINK Countdown Timer Switch (Model CP-U211C). This device is designed to provide convenient, energy-saving control for your exhaust fans, bathroom fans, and various lighting types. By automating shut-off operations, it helps reduce energy consumption and improve convenience in your home or office.

Please read this manual thoroughly before installation and operation to ensure proper use and safety.

Pomembne varnostne informacije

OPOZORILO: NEVARNOST ELEKTRIČNEGA UDARA.

• Installation must be performed by a qualified electrician or a person with a thorough understanding of electrical wiring and systems.
• Always turn off power at the circuit breaker or fuse box before installing or servicing the switch.
• This device requires a neutral wire for operation. If your existing switch box does not have a neutral wire, consult a qualified electrician.
• For single-pole applications only. Do not use with 3-way or multi-way switches.
• Prepričajte se, da so vse žične povezave varne in pravilno izolirane.
• Do not exceed the maximum electrical ratings of the device.
• Delovna zvezatage: 125V, 60 Hz.
• Current Rating: 15A/1875W Resistive or General Purpose, 10A/1250W Ballast or Tungsten, ½ HP, TV-5.

Nastavitev in namestitev

This section provides instructions for installing your BN-LINK Countdown Timer Switch. Ensure power is OFF before proceeding.

Vsebina paketa:

• BN-LINK Countdown Timer Switch
• Stenska plošča
• Montažni vijaki
• Žične matice

Potrebna orodja (niso priložena):

• Izvijač (križni in ploščati)
• Odstranjevalci žice
• Električni trak
• voltage Tester

Koraki namestitve:

1. Izklopite napajanje: Locate the circuit breaker controlling the switch you are replacing and turn it OFF. Verify power is off using a voltage tester.
2. Odstranite staro stikalo: Carefully remove the existing wall plate and unscrew the old switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal.
3. Prepoznajte žice: Identify the following wires in your wall box:
   • Vroča žica (linija): Typically black, brings power from the circuit breaker.
   • Žica za obremenitev: Typically black, sends power to the light/fan.
   • Nevtralna žica: Typically white. A neutral wire is REQUIRED for this switch.
   • Ozemljitvena žica: Typically green or bare copper.
4. Priključite novo stikalo: Connect the wires from your wall box to the BN-LINK timer switch using the provided wire nuts. Refer to the wiring diagram below.
   • Povežite Črna žica from the timer switch to the Hot Wire (Line) from the wall box.
   • Povežite Rdeča žica from the timer switch to the Naložite žico from the wall box.
   • Povežite Bela žica from the timer switch to the Nevtralna žica from the wall box.
   • Povežite Zelena žica from the timer switch to the Ozemljitvena žica from the wall box.
5. Zavarujte stikalo: Carefully fold the wires and push the timer switch into the wall box. Secure it with the mounting screws.
6. Namestite stensko ploščo: Attach the provided wall plate over the switch.
7. Obnovi moč: Ponovno vklopite napajanje na odklopniku.
8. Testno delovanje: Test the timer switch to ensure it functions correctly.

Slika: Wiring diagram for the BN-LINK Countdown Timer Switch. This diagram illustrates the connection points for the ground wire (green), load wire (red), hot wire (black), and neutral wire (white) to the timer switch. A clear warning states "Neutral Wire Must Required."

Navodila za uporabo

The BN-LINK Countdown Timer Switch features intuitive touch controls for easy operation.

Slika: Spredaj view of the BN-LINK Countdown Timer Switch, highlighting the "Touch ON/OFF Button" at the top and the six "Touch to select time" buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour). LED indicators are also shown, indicating which countdown is active.

Funkcije gumbov:

• Gumb za vklop (zgoraj): This is the main ON/OFF button.
  • Press once to turn the connected device (light/fan) ON indefinitely.
  • Press again to turn the connected device OFF.
  • This button can also override any active countdown timer, turning the device OFF immediately.
• Countdown Timer Buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour): These buttons activate a preset countdown.
  • Press any of these buttons to turn the connected device ON for the selected duration.
  • The device will automatically turn OFF once the countdown expires.
  • An LED indicator next to the selected time will illuminate to show the active countdown.

Example uporaba:

To turn on your bathroom fan for 10 minutes, simply press the "10 Min" button. The fan will run for 10 minutes and then automatically shut off. If you need to turn it off sooner, press the top Power button.

Vsestranske aplikacije

The BN-LINK Countdown Timer Switch is suitable for a wide range of applications, enhancing convenience and energy efficiency in various areas of your home or business.

Slika: A collage of four images demonstrating common applications for the timer switch: a bathroom, a closet, a laundry room, and a garage. This illustrates the versatility of the product in different environments.

• Kopalnice: Control exhaust fans to reduce humidity and prevent mold growth.
• Closets & Pantries: Automatically turn off lights after a set time, preventing wasted energy.
• Garaže: Manage lighting or ventilation systems.
• Pralnice: Control exhaust fans or lighting.
• Spas & Enclosed Patios: Conveniently manage lighting or small ventilation units.

This timer switch is compatible with incandescent, fluorescent, and LED lighting, as well as bathroom exhaust fans and heaters within its specified electrical ratings.

Vzdrževanje

The BN-LINK Countdown Timer Switch requires minimal maintenance.

• Čiščenje: To clean the surface of the switch, gently wipe with a soft, damp krpo. Ne uporabljajte abrazivnih čistil, topil ali agresivnih kemikalij, saj lahko poškodujejo površino ali notranje komponente.
• Pregled: Periodically inspect the switch and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and consult a qualified electrician.
• Brez delov, ki bi jih lahko servisiral uporabnik: V stikalu ni delov, ki bi jih lahko uporabnik popravil. Ne poskušajte enote odpreti ali popraviti sami.

Odpravljanje težav

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact BN-LINK Customer Support.

Specifikacije

Slika: Detailed dimensions of the BN-LINK Countdown Timer Switch and its accompanying wall plate. The image shows the height (5 inches for plate, 2.76 inches for switch body), width (3.3 inches for plate, 1.57 inches for switch body), and depth (1.73 inches for switch body).

Garancija in podpora

BN-LINK products are designed to meet high-quality standards. For warranty information or technical support, please contact BN-LINK customer service.

Please have your model number (CP-U211C) and purchase date available when contacting support.

Kontaktni podatki:

• Refer to the BN-LINK official webNajnovejše kontaktne podatke najdete na spletnem mestu ali embalaži izdelka.
• Online support may be available through the BN-LINK brand store on Amazon or their official webmesto.