OLTEANP 4000W Pure Sine Wave Power Inverter User Manual

1. Uvod

Thank you for choosing the OLTEANP 4000W Pure Sine Wave Power Inverter. This device is designed to convert 24V DC battery power into 230V AC household power, providing stable and reliable electricity for various applications, including vehicles, camping, and solar power systems. This manual provides essential information for safe installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your inverter.

Figure 1: OLTEANP 4000W Pure Sine Wave Power Inverter with remote control and cables.

2. Varnostna navodila

Pred namestitvijo ali uporabo pretvornika preberite in razumite vsa varnostna navodila. Neupoštevanje teh navodil lahko povzroči električni udar, požar ali resne poškodbe.

• Prezračevanje: Zagotovite zadostno prezračevanje okoli razsmernika. Ne blokirajte prezračevalnih odprtin.
• Okolje: Install the inverter in a dry, cool, and well-ventilated area, away from direct sunlight, heat sources, flammable materials, and moisture.
• Ozemljitev: Razsmernik mora biti pravilno ozemljen. Za navodila za ozemljitev glejte razdelek o namestitvi.
• Priključek baterije: Connect the inverter directly to a 24V battery bank. Ensure correct polarity (+ to + and - to -). Incorrect connection can damage the inverter and battery.
• Nosilnost: Do not exceed the inverter's continuous power rating of 4000W. Overloading can cause damage and trigger protection mechanisms.
• Preprečevanje iskrenja: This inverter features a professional spark-free protection circuit that automatically stops output if power is not connected correctly or a short circuit occurs. Always ensure proper connections to prevent sparks.
• Vzdrževanje: Ne poskušajte sami odpirati ali servisirati pretvornika. Vsa servisna dela prepustite usposobljenemu osebju.
• otroci: Pretvornik hranite izven dosega otrok.

Figure 2: The inverter features multifunctional safety protection, including high voltage, overload, high temperature, low voltage, and short-circuit protection, managed by an intelligent chip for reliable and stable operation.

3. Značilnosti izdelka

The OLTEANP 4000W Pure Sine Wave Power Inverter is equipped with advanced features for efficient and safe power conversion:

• Čisti sinusni izhod: Provides stable, high-quality AC power suitable for sensitive electronics and appliances, ensuring smooth operation without strange buzzing noises.
• Visoka izhodna moč: Offers 4000W continuous power and 8000W peak power to handle various loads.
• Nastavljiv vhod Voltage: Updated function allows adjustment of input voltage (19V-32V) for compatibility with different battery types, including lithium batteries, reducing battery consumption and extending lifespan. (Adjustment must be made when the inverter is off).
• LCD daljinski upravljalnik: Monitor inverter status, troubleshoot issues, and adjust settings conveniently from a distance. The LCD screen displays error messages via flashing symbols.
• Več izhodnih vrat: Includes two 230V AC outlets, one 5V/3.1A USB port, and one 30W Type-C port for charging and powering various devices simultaneously.
• Celovita zaščita: Built-in professional protection circuits guard against high voltage, overload, high temperature, low voltage, and short circuits, ensuring the safety of your devices and the inverter.
• Inteligentno hlajenje: Features intelligent cooling fans that activate based on temperature and load, ensuring efficient heat dissipation and quiet operation.

Figure 3: The inverter produces a pure sine wave output, ideal for sensitive electronics.

4. Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• OLTEANP 4000W Pure Sine Wave Power Inverter
• LCD daljinski upravljalnik
• Battery Cables (80cm, 40mm²)
• Žica za ozemljitev
• Wrench (for terminals)
• Uporabniški priročnik (ta dokument)

Figure 4: Inverter dimensions (18.30in / 465mm length, 7.91in / 201mm width, 4.44in / 113mm height) and included accessories: remote control, battery cables, grounding wire, and wrench.

5. Nastavitev in namestitev

Follow these steps for proper installation of your OLTEANP inverter:

5.1 Namestitev pretvornika

• Choose a mounting location that is dry, cool, well-ventilated, and away from direct sunlight or heat sources.
• Ensure there is sufficient space around the inverter for airflow and access to connections.
• Securely mount the inverter using appropriate hardware for the chosen surface.

5.2 Priključitev baterije

Pomembno: Ensure the inverter is OFF before making any connections.

• Connect the positive (+) terminal of the inverter to the positive (+) terminal of your 24V battery bank using the red battery cable.
• Connect the negative (-) terminal of the inverter to the negative (-) terminal of your 24V battery bank using the black battery cable.
• Ensure all connections are tight and secure to prevent loose connections and overheating.

5.3 Ozemljitev pretvornika

Proper grounding is crucial for safety and stable operation.

• Locate the grounding terminal on the inverter (usually marked with a ground symbol).
• Connect one end of the grounding wire to this terminal.
• Connect the other end of the grounding wire to a reliable earth ground point (e.g., vehicle chassis, ground rod).

Figure 5: Technical diagram showing the OLTEANP ground wire installation specifications. Proper grounding effectively reduces interference and ensures inverter stability and reliability.

5.4 Adjustable Input Voltage Nastavitev

The inverter features an adjustable input voltage range (19V-32V) for compatibility with various battery types. This setting helps protect battery integrity and extend its lifespan.

• Pomembno: Prilagodite glasnosttage only when the inverter is OFF.
• Refer to the table below or on the inverter for the correct switch settings for your battery type (GEL, SLA, LI, FLD, AGM, CLA, USER).
• Use the small switches on the inverter's control panel to select the desired low voltagprag izklopa.

Figure 6: Diagram illustrating selectable input voltage settings for different battery types (GEL, SLA, LI, FLD, AGM, CLA, USER) and corresponding low voltage shutdown thresholds. Please select the input voltage before turning on the inverter.

6. Navodila za uporabo

Once the inverter is properly installed and connected, follow these steps to operate it:

6.1 Vklop/izklop

• Zagotovite, da so vse povezave varne.
• Press the ON/OFF switch on the inverter or the remote control to turn on the unit. The LCD screen will illuminate.
• To turn off, press the ON/OFF switch again.

6.2 Using AC Outlets, USB, and Type-C Ports

• Plug your 230V AC appliances into the two AC outlets. Ensure the total power consumption does not exceed 4000W.
• Connect your USB-powered devices to the 5V/3.1A USB port.
• Connect your Type-C compatible devices to the 30W Type-C port.

Figure 7: The OLTEANP 4000W inverter can power various devices such as electric ovens, cameras, laptops, coffee machines, hair dryers, LED lights, TVs, and electric drills. The maximum operating power for this device must not exceed 4000 Watts.

6.3 Understanding the LCD Remote Control

The LCD remote control provides real-time information about the inverter's status and allows for easy monitoring and troubleshooting.

• Informacije o prikazu: The screen shows battery capacity, DC input voltage, izhodna voltage, and power consumption in watts.
• Indikatorji napak: In case of an issue (e.g., high voltage, nizka voltage, overload, overheat, short circuit), the corresponding symbol on the LCD will flash to alert you.
• Wakeup Screen Switch: Pritisnite ta gumb za view data on the screen if it's in standby mode.

Figure 8: Digital display of the control panel showing multiple voltage and power readings on the LCD screen. The display communicates directly via flashing symbols to inform you of any problems, such as high voltage, nizka voltage, short circuit/overload, and overheat.

7. Vzdrževanje

Redno vzdrževanje zagotavlja dolgo življenjsko dobo in optimalno delovanje vašega pretvornika.

• Čiščenje: Zunanjost pretvornika redno čistite z mehko, suho krpo. Ne uporabljajte tekočih čistil ali topil.
• Prezračevanje: Ensure the ventilation openings are free from dust and debris. Use compressed air to clear any blockages if necessary.
• Povezave: Regularly check all electrical connections (battery cables, grounding wire) to ensure they are tight and free from corrosion.
• Shranjevanje: Če boste pretvornik shranjevali dlje časa, ga odklopite iz akumulatorja in shranite na hladnem in suhem mestu.

8. Odpravljanje težav

The LCD remote control helps identify common issues. Refer to the table below for troubleshooting guidance:

9. Specifikacije

Detailed technical specifications for the OLTEANP 4000W Pure Sine Wave Power Inverter:

• Številka modela: OLTEANP-4000W
• Neprekinjena moč: 4000 vatov
• Najvišja moč: 8000 vatov
• Vhodna voltage: 24V DC (Adjustable 19V-32V)
• Izhodna voltage: 230 V AC
• Izhodna valovna oblika: Čisti sinusni val
• AC vtičnice: 2
• Vrata USB: 5V/3.1A
• Vrata tipa C: 30 W
• Teža artikla: 7.39 kilogramov
• Priporočena uporaba: Vehicle, Camppotovanje
• Proizvajalec: OLTEANP

10. Garancija in podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or contact the retailer where you purchased the product. Keep your proof of purchase for warranty claims.