Uvod
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Metabo TBP 6200/8 INOX submersible borehole pump. Please read these instructions carefully before using the pump for the first time. Keep this manual in a safe place for future reference.
Varnostna navodila
Vedno upoštevajte naslednje varnostne ukrepe, da preprečite telesne poškodbe in poškodbe opreme:
- Prepričajte se, da napajanje ustreza specifikacijam na napisni ploščici črpalke.
- Never operate the pump without water. Dry running can cause severe damage.
- Do not use the power cable to lift or lower the pump. Always use a suitable rope or chain.
- Pred kakršnim koli vzdrževanjem ali čiščenjem črpalko izključite iz električnega omrežja.
- Otroke in nepooblaščene osebe držite stran od delujoče črpalke.
- Zagotovite pravilno ozemljitev električnega priključka.
- Ne črpajte vnetljivih, eksplozivnih ali korozivnih tekočin.
Nastavitev
1. Razpakiranje in pregled
Carefully remove the pump from its packaging. Inspect the pump for any signs of damage that may have occurred during transit. If any damage is found, do not use the pump and contact your supplier.
2. Attaching the Suspension Rope
Attach a strong, non-stretchable rope or chain to the designated eyelets on the pump. This rope will be used to lower and retrieve the pump from the borehole. Ensure the knot is secure.
Image: Securely tying a suspension rope to the pump's attachment point. This rope is crucial for safe installation and retrieval of the pump from the borehole.
3. Connecting the Discharge Hose/Pipe
Connect a suitable discharge hose or pipe to the pump's outlet. Ensure all connections are tight and leak-free. Use appropriate sealing materials if necessary.
Image: Connecting the discharge hose to the pump. Proper sealing ensures efficient water transfer and prevents leaks.
4. Lowering the Pump into the Borehole
Carefully lower the pump into the borehole using the attached suspension rope. Ensure the pump is fully submerged and positioned correctly, avoiding contact with the bottom or sides of the well to prevent sediment intake or damage.
Image: Lowering the submersible pump into a borehole. The pump must be fully submerged for proper operation.
5. Električna povezava
Connect the pump's power cable to a suitable, grounded electrical outlet. Ensure the circuit is protected by a residual current device (RCD) for safety.
Navodila za uporabo
1. Zagon črpalke
Once the pump is fully submerged and all connections are secure, switch on the power supply. The pump will begin to draw water. Monitor the initial operation for any unusual noises or vibrations.
2. Monitoring Operation
Regularly check the water flow and pressure. If the flow decreases significantly or the pump makes unusual noises, switch it off immediately and investigate the cause.
Image: The pump in operation, supplying water for garden irrigation. Ensure consistent water flow during use.
Image: The pump effectively powering a sprinkler system for garden watering, demonstrating its application.
3. Zaustavitev
To stop the pump, simply switch off the power supply. If the pump will not be used for an extended period, disconnect it from the power source and follow the maintenance and storage guidelines.
Vzdrževanje
1. Redno čiščenje
Periodically remove the pump from the borehole and clean its exterior, especially the intake screen, to prevent blockages. Use clean water and a soft brush. Do not use harsh chemicals.
2. Priprava na zimo
In regions with freezing temperatures, remove the pump from the borehole before winter. Drain all water from the pump and hoses to prevent damage from freezing. Store the pump in a dry, frost-free location.
3. Shranjevanje
When not in use, store the pump in a clean, dry, and well-ventilated area, protected from direct sunlight and extreme temperatures.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Črpalka se ne zažene | Brez napajanja Aktivirana termična preobremenitev Tekač je blokiran | Preverite priključek za napajanje in odklopnik Pustite, da se črpalka ohladi Disconnect power and clear blockage |
| Zmanjšan pretok vode | Zamašen dovodni zaslon Cev je prepognjena ali zamašena Nizka gladina vode v vodnjaku | Čisto sesalno sito Check and clear hose Wait for water level to rise or reposition pump |
| Črpalka teče, vendar ni vode | Črpalka ni popolnoma potopljena Zrak v sistemu Check valve faulty | Ensure pump is submerged Odzračite zrak iz sistema Inspect or replace check valve |
| Prekomerni hrup/vibracije | Tuj predmet v črpalki Obrabljeni ležaji Pump touching well walls | Disconnect power and inspect impeller Obrnite se na usposobljeno servisno osebje Adjust pump position |
Specifikacije
Image: The Metabo TBP 6200/8 INOX submersible pump. Its robust stainless steel construction is designed for durability.
- Številka modela: 610217000
- Dimenzije (D x Š x V): 45 x 24 x 24 cm
- Teža: 9.3 kilogramov
- Material: Nerjaveče jeklo
- Power (Motor): 1100 vatov
- vir energije: Električni kabel
- Proizvajalec: Metabo
- Država izvora: Nemčija
Krivulja zmogljivosti
Image: Performance curve for the TBP 6200/8 INOX pump. This graph illustrates the relationship between flow rate, head, and pressure, indicating the pump's operational capabilities under various conditions.
Garancija in podpora
For warranty information, technical support, or spare parts, please contact your authorized Metabo dealer or visit the official Metabo webspletno mesto. Shranite račun kot dokazilo o nakupu.