Uvod
Thank you for choosing the KODA Multi-Directional Shop Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED shop lights. Please read these instructions thoroughly before use and retain them for future reference.
Varnostne informacije
Pri nameščanju ali uporabi električnih izdelkov vedno upoštevajte osnovne varnostne ukrepe, da zmanjšate tveganje požara, električnega udara in telesnih poškodb.
- Odklop napajanja: Ensure power is turned off at the circuit breaker before installation, maintenance, or cleaning.
- Pravilna ozemljitev: Ta napeljava mora biti pravilno ozemljena.
- Kvalificirani električar: Če niste prepričani glede postopka namestitve, se posvetujte z usposobljenim električarjem.
- Samo notranja uporaba: Ta izdelek je namenjen za uporabo v zaprtih prostorih v suhih prostorih. Ne izpostavljajte ga vodi ali vlagi.
- Delovna temperatura: Do not operate in temperatures outside the specified range.
- Izogibajte se neposredni izpostavljenosti oči: Ne glejte neposredno v LED-svetlobo, ko je ta osvetljena.
- Linkable Limit: Do not exceed the maximum linkable limit of 6 fixtures.
Vsebina paketa
Pred začetkom namestitve preverite, ali so prisotne vse komponente:
- 2 x KODA Multi-Directional LED Shop Lights
- Installation Kit (includes hanging chains, S-hooks, V-hooks, mounting screws, wall anchors)
- 2 x 5 ft. Power Cords with ON/OFF Pull Chains
Konec izdelkaview
The KODA Multi-Directional Shop Light provides versatile and powerful illumination for various environments. Key features include:
- Izjemno svetla osvetlitev: Delivers 8000 lumens of light.
- Selectable Lighting Modes: Choose between Full Brightness, Main Light, or Ambient Lighting.
- Povezljiva zasnova: Connect up to 6 fixtures in series.
- Vsestranska montaža: Supports both surface and suspended mounting.
- Energijsko učinkovit: Energy Star Certified, consuming only 80 watts.
- Dolgo obstojen: LED components have a lifespan of up to 50,000 hours.

This image displays two KODA Multi-Directional Shop Lights, showcasing their sleek, rectangular design and how they are typically suspended from a ceiling by chains.
Nastavitev in namestitev
The KODA Multi-Directional Shop Light can be installed using either suspended or surface mounting methods. Ensure power is disconnected before installation.
Suspended Mounting (Recommended for Garages/Workshops)
- Označite pritrdilne točke: Determine the desired location for your light fixture. Mark two points on the ceiling or overhead structure that align with the mounting holes on the fixture.
- Namestitev stropnih kavljev: Drill pilot holes at the marked points. Insert wall anchors if mounting into drywall. Screw the ceiling hooks (V-hooks) into the anchors or directly into a sturdy structure.
- Pritrdite verige: Connect the hanging chains to the V-hooks on the ceiling and the S-hooks on the fixture. Adjust chain length to achieve the desired hanging height.
- Priključite napajanje: Plug the 5 ft. power cord into a standard 120V AC outlet.
Površinska montaža
- Označite pritrdilne točke: Hold the fixture against the desired mounting surface (ceiling or wall) and mark the locations for the mounting screws.
- Vrtanje pilotnih lukenj: Drill pilot holes at the marked locations. Use wall anchors if mounting into drywall.
- Varna naprava: Align the fixture with the pilot holes and secure it using the provided mounting screws.
- Priključite napajanje: Plug the 5 ft. power cord into a standard 120V AC outlet.
Povezovanje več vpenjal
Up to 6 KODA Multi-Directional Shop Lights can be linked in series. To link fixtures:
- Ensure all fixtures are securely mounted.
- Connect the power cord of the first fixture to an outlet.
- Use the provided linking cable (if applicable, or an additional power cord) to connect the convenience outlet on the first fixture to the power input of the second fixture.
- Ponovite za dodatne napeljave, do največ 6.

Režija view of a workshop, brightly lit by multiple KODA Multi-Directional Shop Lights, demonstrating their effectiveness in providing ample illumination for a detailed work environment.

A garage interior featuring KODA Multi-Directional Shop Lights installed above a workbench and storage cabinets, illustrating their application in a typical home garage setting.
Navodila za uporabo
Once installed and powered, operate your KODA Multi-Directional Shop Light as follows:
- VKLOP/IZKLOP: Use the integrated pull chain to turn the light fixture ON or OFF.
- Izberite načine osvetlitve: The pull chain also cycles through the available lighting modes. Each pull will switch to the next mode:
- Polna svetlost: Both main and ambient lights are active for maximum illumination (8000 lumens).
- Glavna luč: Primary light source is active.
- Ambientalna osvetlitev: Secondary light source is active, providing softer illumination.

This image shows an individual focused on a woodworking task, with a KODA Multi-Directional Shop Light providing clear, direct illumination over the workspace, highlighting the light's utility in task-oriented settings.
Vzdrževanje
The KODA Multi-Directional Shop Light requires minimal maintenance due to its long-lasting LED components.
- Čiščenje: Ensure the fixture is unplugged and cool before cleaning. Wipe the exterior with a soft, dry, or slightly damp krpo. Ne uporabljajte abrazivnih čistil ali topil.
- LED: The LED components are integrated and not user-replaceable. With a lifespan of up to 50,000 hours, frequent replacement is not necessary.
- Pregled: Periodically inspect the power cord and hanging hardware for any signs of damage or wear. Replace damaged components immediately.
Odpravljanje težav
If you encounter issues with your KODA Multi-Directional Shop Light, refer to the following common problems and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Lučka se ne prižge | No power to the outlet; Power cord not fully plugged in; Circuit breaker tripped; Pull chain not activated. | Check the power outlet with another device; Ensure power cord is securely plugged in; Reset the circuit breaker; Pull the chain to activate the light. |
| Svetloba utripa ali zatemni | Loose connection; Voltage fluctuations; Overloaded circuit. | Check all connections; Ensure the fixture is on a stable power supply; Reduce the number of devices on the circuit. |
| Cannot change lighting modes | Pull chain mechanism issue. | Ensure the pull chain is being pulled firmly and released completely. If the issue persists, contact support. |
| Linked fixtures not working | Linking cable not properly connected; Exceeded maximum linked fixtures. | Verify all linking cables are securely connected; Ensure no more than 6 fixtures are linked in series. |
Specifikacije
| Številka modela | LM030404-2 |
| Znamka | Koda |
| Vrsta svetlobnega vira | LED (dioda, ki oddaja svetlobo) |
| Svetlost | 8000 lumnov |
| Wattage | 80 vatov |
| voltage | 120 voltov (AC) |
| Material | Aluminij |
| barva | Bela |
| oblika | Pravokotna |
| Vrsta namestitve | Stropna montaža (viseča ali površinska) |
| Življenjska doba | Do 50,000 ur |
| Certifikati | Certifikat Energy Star |
| UPC | 840010304046 |

A technical diagram providing the precise measurements of the KODA Multi-Directional Shop Light, including its length, width, and height in both inches and centimeters, essential for installation planning.
Informacije o garanciji
Specific warranty details for the KODA Multi-Directional Shop Light may vary. Please refer to the product packaging or the official Koda website for the most current warranty policy. Retain your proof of purchase for any warranty claims.
Podpora
For further assistance, technical support, or inquiries regarding your KODA Multi-Directional Shop Light, please visit the official Koda store or contact Koda customer service.
Koda Store: Obiščite trgovino Koda na Amazonu