Transformers Studio Series Deluxe Class Reactivate 10 Gamer Edition Bumblebee Instruction Manual

1. Uvod

This manual provides detailed instructions for the Transformers Studio Series Deluxe Class Reactivate 10 Gamer Edition Bumblebee action figure. This 4.5-inch figure converts between robot and dune buggy modes and includes blaster accessories. Please read these instructions carefully before use to ensure proper operation and enjoyment of your figure.

2. Varnostne informacije

OPOZORILO: NEVARNOST ZADUŠITVE – Lahko nastanejo majhni deli. Ni primerno za otroke, mlajše od 3 let.

Always supervise young children during play. Keep small accessories away from infants and toddlers.

3. Vsebina paketa

• 1x Bumblebee Converting Action Figure
• 2x Blaster Accessories

4. Izdelek je končanview

The Bumblebee figure is a highly articulated collectible inspired by the Transformers: Reactivate video game. It features metallic battle damage deco and can transform between two distinct modes: robot and dune buggy.

4.1 Robotski način

Image: Bumblebee figure in its robot form, showcasing articulation and design details.

In robot mode, Bumblebee stands approximately 4.5 inches (11.5 cm) tall. It features articulated head, arms, and legs, allowing for various action poses. The figure is designed with intricate details and metallic battle damage deco.

4.2 Dune Buggy Mode

Image: Bumblebee figure transformed into its compact dune buggy vehicle mode.

The dune buggy mode is a compact and robust vehicle, ready for off-road action. The transformation process ensures a secure and stable vehicle form, maintaining the figure's aesthetic integrity.

5. Nastavitev

Remove the Bumblebee figure and its accessories from the packaging. Inspect the figure for any visible damage or loose parts. No assembly is required beyond the transformation process.

6. Navodila za uporabo: Transformacija

The Bumblebee figure converts between robot and dune buggy modes in 20 steps. Follow these general guidelines for transformation. Note: Specific joint movements may vary slightly. Apply gentle, firm pressure during transformation.

6.1 Robot to Dune Buggy Mode (20 Steps)

1. Detach any accessories from the figure.
2. Fold the robot's hands into its forearms.
3. Rotate the waist section 180 degrees.
4. Collapse the chest panel downwards.
5. Fold the head into the chest cavity.
6. Rotate the shoulder sections inward.
7. Bring the arms together, aligning them with the body.
8. Align the leg panels to prepare for vehicle formation.
9. Fold the feet upwards and inward.
10. Connect the leg sections to form the rear of the dune buggy.
11. Secure the arm sections to form the sides of the vehicle.
12. Rotate the wheels into their proper vehicle position.
13. Close any remaining gaps between panels.
14. Ensure all panels are flush and securely connected.
15. Verify the stability of the vehicle mode.
16. Check for proper alignment of all vehicle parts.
17. Ensure all locking tabs are engaged to hold the form.
18. Smooth out any visible seams or misaligned parts.
19. Confirm that the wheels spin freely.

6.2 Dune Buggy to Robot Mode (20 Steps)

1. Detach any accessories from the vehicle.
2. Separate the rear vehicle sections to begin forming the legs.
3. Extend the feet downwards.
4. Unfold the leg panels.
5. Separate the side vehicle sections to free the arms.
6. Extend the arms from the body.
7. Rotate the shoulder sections into their robot position.
8. Lift the head from the chest cavity.
9. Extend the chest panel.
10. Rotate the waist 180 degrees back to the front-facing position.
11. Extend the hands from the forearms.
12. Adjust the arm and leg articulation for posing.
13. Position the figure for display.
14. Verify the stability of the robot mode.
15. Check for proper alignment of all robot parts.
16. Ensure all locking tabs are disengaged.
17. Smooth out any visible seams or misaligned parts.
18. Confirm that articulation points move freely.
19. Attach blaster accessories to the robot's hands (optional).
20. The figure is now in Robot mode.

7. Pritrditev dodatne opreme

The Bumblebee figure comes with two blaster accessories. These can be attached to the figure's hands in robot mode or stored in designated ports in vehicle mode, if available. Gently push the blaster's peg into the corresponding hole on the figure's hand or storage port until secure.

8. Vzdrževanje

To keep your Transformers figure in optimal condition:

• Čiščenje: Wipe the figure with a soft, dry cloth. For stubborn dirt, a slightly damp Krpo lahko uporabite, vendar se izogibajte prekomerni vlagi. Ne uporabljajte agresivnih kemikalij ali abrazivnih čistil.
• Shranjevanje: Store the figure away from direct sunlight and extreme temperatures to prevent discoloration or material degradation.
• Ravnanje: Handle the figure with care, especially during transformation, to avoid stressing joints or breaking small parts.

9. Odpravljanje težav

• Težavnost preoblikovanja: If parts are stiff, ensure you are following the steps in the correct order. Do not force parts; re-examine the instructions. Sometimes, a slight wiggle or gentle pressure in a different direction can help.
• Ohlapni sklepi: Over time, some joints may become slightly loose. This is normal with repeated use.
• Deli se ne poravnajo: Double-check that all previous steps are completed correctly and that no panels are obstructing the transformation path.

10. Specifikacije

11. Garancija in podpora

Za informacije o garanciji ali podporo za izdelek se obrnite na uradno spletno stran proizvajalca webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Shranite račun kot dokazilo o nakupu.