Uporabniški priročnik za robotsko čiščenje oken LIECTROUX YW610

1. Varnostne informacije

Please read all safety instructions carefully before using the LIECTROUX YW610 Window Cleaning Robot. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always connect the robot to a power source during operation. The integrated UPS battery is for emergency power-off protection only.
• Ensure the safety rope is securely fastened to a sturdy indoor anchor point before placing the robot on the window.
• Robota ne uporabljajte na razpokanih ali poškodovanih steklenih površinah.
• Roke, lasje in ohlapna oblačila držite stran od gibljivih delov.
• Do not operate the robot in rainy or extremely humid conditions.
• Hraniti izven dosega otrok in hišnih ljubljenčkov.
• Use only the original power adapter and accessories provided with the robot.

Image: The robot's power connection and safety features, including the 4m safety cable, 1.5m extension cable, and 20-minute UPS power-off protection.

2. Izdelek je končanview

The LIECTROUX YW610 is an intelligent window cleaning robot designed to provide deep and efficient cleaning for various glass surfaces. It features a powerful 2800PA suction motor, dual spiral cleaning heads with microfiber cloths, and an automatic water spray system for effective dirt removal.

Vsebina paketa

• LIECTROUX YW610 Window Cleaning Robot
• Daljinski upravljalnik
• Power Adapter and Cable (4m + 1.5m extension)
• Varnostna vrv
• Čistilne krpe iz mikrovlaken (več parov)
• Steklenica za polnjenje vode
• Uporabniški priročnik

Diagram izdelka

Image: The LIECTROUX YW610 Window Cleaning Robot shown on a window with its remote control, illustrating its compact design and operation.

3. Nastavitev

3.1 Pritrjevanje čistilnih blazinic

Attach the clean microfiber pads to the two rotating disks on the underside of the robot. Ensure they are securely fastened and cover the entire disk surface.

3.2 Polnjenje rezervoarja za vodo

Locate the water tank inlet on the robot. Use the provided water filling bottle to fill the tank with clean water or a recommended window cleaning solution. Do not overfill.

Image: The robot's automatic water spray function, highlighting its effectiveness for dust removal.

3.3 Power Connection and Safety Rope

Connect the power adapter to the robot and then plug it into a power outlet. Securely attach the safety rope to the designated anchor point on the robot and then to a strong, fixed object indoors, such as a heavy piece of furniture or a window frame anchor.

4. Navodila za uporabo

4.1 Začetna namestitev in začetek

Place the robot on the window surface, ensuring it is flat against the glass. Press the power button on the robot or the 'Start' button on the remote control. The robot will automatically adhere to the glass using its suction.

Image: A visual representation of the robot's four-stage cleaning process: 2800Pa vacuum suction, initial wiping for dust, water spray to soften dirt, and final wiping for dirt and water stains.

4.2 Načini čiščenja

The robot features three automatic cleaning modes. You can select these modes using the remote control:

• Up-to-down: The robot cleans from the top of the window downwards.
• Left-to-down: The robot cleans from the left side of the window downwards.
• Right-to-down: The robot cleans from the right side of the window downwards.

Image: A visual guide to the three intelligent cleaning routes the robot can follow: Up-to-down, Left-to-down, and Right-to-down, controlled by a single press.

4.3 Delovanje daljinskega upravljalnika

The remote control allows you to start/stop the robot, select cleaning modes, and manually control its movement. Refer to the remote control diagram in the quick start guide for button functions.

Image: The robot's dual-disk simulated twisting and sweeping motion, designed for complete and close cleaning of surfaces.

4.4 Samodejno pršenje vode

The robot is equipped with an automatic water spray function that dispenses a fine mist to loosen dirt and dust, enhancing cleaning efficiency. This feature operates automatically during cleaning cycles.

Image: Key technologies of the robot, including ultrasonic water spray, micro-air nucleus water dialysis, targeted homogenization technology, and one-press start on framework.

5. Vzdrževanje

Redno vzdrževanje zagotavlja optimalno delovanje in podaljšuje življenjsko dobo vašega robota.

5.1 Cleaning the Microfiber Pads

After each use, remove the microfiber cleaning pads from the robot. They can be hand-washed or machine-washed with mild detergent. Allow them to air dry completely before reattaching or storing.

5.2 Čiščenje ohišja robota

Zunanjost robota obrišite z mehko,amp cloth. Do not use abrasive cleaners or immerse the robot in water. Ensure the suction area and sensors are free from debris.

5.3 Cleaning the Water Nozzle

Periodically check the water spray nozzle for any blockages. If necessary, gently clean it with a small brush or pin to ensure proper water dispersion.

6. Odpravljanje težav

If you encounter issues with your LIECTROUX YW610, refer to the table below for common problems and solutions.

7. Specifikacije

8. Garancija in podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or contact LIECTROUX customer service through their official webspletno mesto ali prodajalec, kjer je bil izdelek kupljen. Dokazilo o nakupu shranite za uveljavljanje garancije.