ODK Reversible L-Shaped Desk with Drawers, Outlets, USB Ports, and LED

Uvod

Thank you for choosing the ODK Reversible L-Shaped Desk. This manual provides detailed instructions for assembly, operation, and maintenance to ensure safe and efficient use of your new desk. This versatile desk features ample storage with drawers and shelves, integrated power outlets and USB ports for convenience, and LED lighting for an enhanced ambiance. Its reversible design allows for flexible placement in various room layouts.

Varnostne informacije

• Please follow the assembly instructions carefully to avoid any risk of injury or damage.
• Do not overload the electrical outlets.
• Adjust the monitor stand height correctly to prevent strain.
• For ease and safety, we recommend a two-person assembly.
• Unpack all parts and verify they are complete and in good condition before starting assembly.

Vsebina paketa

Before assembly, ensure all components listed below are present. Refer to the assembly video for visual identification of parts.

• Desk Panels (A, B, C)
• Metal Frame Components (K, L, E, D, G, H, I, J, N, O, P, R, S, T, U, V, W, X, Y, Z)
• Predali za blago (4 enoti)
• Power Strip with 2 Outlets and 2 USB Ports
• LED trak s krmilnikom
• Stojalo za monitor
• Assembly Hardware (screws, footpads, cable clips, etc.)
• Assembly Tool (Allen key)

Nastavitev in montaža

Follow these steps carefully for proper assembly. An assembly video is provided below for visual guidance.

Navodila za sestavljanje po korakih:

1. Pritrdite podloge za noge: Install footpads (part 1) onto the bottom of frame pieces R, J, N, F, G, and P. Ensure they are securely fitted.
2. Sestavljanje stranskih okvirjev: Fix pieces S and R, K and J, O and N together using screws (part 6). Pay close attention to the orientation of piece S, ensuring the marked screw holes on S and R are on the same side.
3. Povežite dele okvirja: Fix pieces J and G together using screws (part 6).
4. Namestitev križnih opornikov: Fix cross braces (part Z) to pieces J and G using screws (part 2).
5. Assemble Shelving Units: Fix pieces T and U onto P and R using screws (part 6). Note that for the left-side drawers, P is installed on the left side of R. For the right-side drawers, P is installed on the right side of R.
6. Attach Main Frame Sections: Fix pieces N and R to V using screws (part 6). Determine the installation direction of N and V based on the indicated holes and arrows.
7. Namestite spodnjo polico: Fix piece E with screws (part 9) and install piece Q with screws (part 5). Do not overtighten screws (part 9). Piece Q is an anti-overload support foot; it is normal if it does not touch the ground.
8. Povežite vodoravne palice: Insert piece L into M and fix L and M together using screws (part 2). Ensure the screw (part 2) faces downwards to avoid obstructing the desktop installation.
9. Attach Horizontal Supports: Fix pieces I and V to L and M using screws (part 6).
10. Install Desktop Panels: Fix desktop panels A, B, and C using screws (part 5). First, install all screws loosely on the tabletop, then tighten them after ensuring A and B are perfectly aligned. Incorrect screws can crack the panel.
11. Namestitev podaljška: Fix piece Y with screws (part 2) and install the power strip (part 13) with screws (part 7).
12. Sestavljanje predalov: Open the fabric drawer (part 12) and place the bottom board (part 11) inside. Then, fix the handle (part 10) with screws (part 8).
13. Vstavite predale: Install the 4 assembled fabric drawers into their designated slots.
14. Attach Monitor Stand Base: Fix 2 pieces W to X using screws (part 6).
15. Install Monitor Stand Panel: Fix pieces W and X onto panel D using screws (part 4). Incorrect screws can crack the panel.
16. Priprava LED traku: Apply 3M adhesive to the back of the LED strip (part 16). Ensure the adhesive is placed on the back to avoid blocking light emission.
17. Pritrditev LED traku: Fix the LED strip (part 16) to the bottom of panel D.
18. Namestitev stojala za monitor: Fix panel D with screws (part 5). The height of the monitor stand can be adjusted according to individual needs.

Navodila za uporabo

Vgrajene vtičnice in vrata USB

The desk is equipped with 2 power outlets (220-250V/15A) and 2 USB charging ports (5V/2.1A) for convenient access to power for your electronic devices. Simply plug your devices into the integrated strip located on the desktop.

LED osvetlitev

The LED lighting features 10 colors and 10 lighting modes to create an immersive atmosphere. Use the inline controller to cycle through colors and modes. The LED strip has a memory function that retains the last selected mode when powered on again.

Predali in police za shranjevanje

Utilize the four fabric drawers and open shelves for organized storage of books, files, office supplies, and other small items. The monitor stand also provides additional space and helps maintain an ergonomic posture.

Slika: ODK L-shaped desk with open drawers showing organized items like files, books, and office supplies. This image illustrates the practical storage solutions offered by the desk's drawers and shelves.

Vzdrževanje

To maintain the quality and appearance of your ODK desk, follow these simple care instructions:

• Površine obrišite s suho krpo, da odstranite prah in umazanijo.
• Izogibajte se uporabi agresivnih kemikalij ali abrazivnih čistil, saj lahko poškodujejo premaz.
• Mizo hranite stran od neposredne sončne svetlobe in prekomerne vlage, da preprečite upogibanje ali razbarvanje.
• Regularly check and tighten all screws and connections to ensure stability.

Odpravljanje težav

If you encounter any issues with your ODK desk, please refer to the following common problems and solutions:

• Manjkajoči ali poškodovani deli: If your desk arrives with damaged, missing, or scratched parts, please contact our customer service team immediately for assistance.
• Unstable Desk: Ensure all screws are properly tightened. If the desk still feels unstable, recheck the assembly steps to confirm all parts are correctly installed.
• Težave z elektriko: If the power outlets or USB ports are not functioning, ensure the power cord is securely plugged into a working wall outlet. Avoid overloading the power strip.
• Okvara LED luči: Check the connection of the LED strip to its power source and controller. Ensure the controller is functioning correctly.
• Ergonomic Discomfort: Adjust the height of the monitor stand to promote better posture and reduce back and neck strain.

Specifikacije

Garancija in podpora

ODK is committed to providing high-quality products and excellent customer service. Your purchase is covered by standard legal guarantees.

• Vrne: Enjoy 30-day returns on your purchase.
• Podpora strankam: If you encounter any issues such as damaged, missing, or scratched parts, please do not hesitate to contact our professional customer service team. We are dedicated to resolving your concerns within 24 hours.