USX MOUNT USX-WM1026

USX MOUNT Universal Full Motion TV Wall Mount

Model: USX-WM1026

1. Uvod

Thank you for choosing the USX MOUNT Universal Full Motion TV Wall Mount. This manual provides detailed instructions for safe installation, operation, and maintenance of your new wall mount. Please read this manual thoroughly before installation and keep it for future reference.

This mount is designed to securely hold 10-26 inch displays with a maximum weight of 10kg (22 lbs). It supports VESA mounting patterns of 50x50mm, 75x75mm, and 100x100mm.

USX MOUNT Universal Full Motion TV Wall Mount

Figure 1.1: USX MOUNT Universal Full Motion TV Wall Mount

2. Specifikacije izdelka

FunkcijaSpecifikacija
ModelUSX-WM1026
Združljivost velikosti zaslona10 - 26 palcev
Največja nosilnost10 kg (22 lbs)
Združljivost VESA50x50mm, 75x75mm, 100x100mm
Kot nagiba+30° / -30°
Swivel Angle (Wall Plate)±45° (odvisno od velikosti televizorja)
Razdalja do stene62 mm
MaterialHladno valjano jeklo
barvaČrna

Opomba: Always verify your TV's weight, screen size, and VESA pattern before installation to ensure compatibility.

Compatibility Check: Screen Size, VESA, Weight, Wall Type

Figure 2.1: Compatibility Check for TV Size, VESA, Weight, and Wall Type

VESA Compatibility Diagram showing 50x50mm, 75x75mm, 100x100mm patterns

Figure 2.2: Supported VESA Mounting Patterns

3. Varnostne informacije

Please read and understand all instructions before installation. If you have any questions, contact customer support. Improper installation may result in property damage or personal injury.

  • Do not install this product on drywall or plasterboard alone. It must be mounted to a solid concrete wall or a wooden stud.
  • Ensure the wall structure can safely support the combined weight of the mount and your display.
  • Ne prekoračite največje nosilnosti 10 kg (22 lbs).
  • Use only the provided hardware. If any parts are missing or damaged, contact customer support.
  • Always have two people for installation, especially when lifting the TV.
  • Med namestitvijo hranite otroke in hišne ljubljenčke proč.

4. Vsebina paketa

Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or defective, please contact USX MOUNT customer service.

Paket običajno vključuje:

  • Sestavljanje stenske plošče
  • TV nosilec
  • Mounting Hardware (screws, anchors, washers for various TV and wall types)
  • Navodila za uporabo

5. Vodič za namestitev

Za varno namestitev natančno sledite tem korakom.

5.1. Izberite vrsto stene

This mount is suitable for installation on solid concrete walls or wooden studs. Do NOT install on drywall or plasterboard without securing to a stud.

Compatible Wall Types: Concrete Wall with anchors, Wooden Stud with bolts

Slika 5.1: Združljive vrste sten

5.2. Namestitev po korakih

  1. Pritrdite stensko ploščo: Position the wall plate on your chosen wall location. Mark the drilling points. Drill pilot holes and secure the wall plate using appropriate screws and anchors for your wall type. Ensure it is level and firmly attached.
  2. Attach TV Bracket to TV: Secure the TV bracket to the back of your television using the provided VESA screws and washers that match your TV's VESA pattern. Ensure the bracket is centered and tightened securely.
  3. Obesite televizor na stensko ploščo: Carefully lift the TV (with the bracket attached) and hook it onto the wall plate. Ensure the TV is properly seated and locked into place.
  4. Prilagodi kot: Adjust the TV to your desired viewing angle using the tilt and swivel mechanisms.
Three-step installation process: 1. Attach bracket to wall, 2. Attach TV to bracket, 3. Adjust TV angle

Figure 5.2: Simplified Installation Steps

6. Delovanje in nastavitve

This full motion mount allows for flexible positioning of your display.

6.1. Nastavitev nagiba

The TV bracket allows for a tilt range of +30 degrees upward and -30 degrees downward. Loosen the tilt adjustment knobs on the side of the TV bracket, set the desired angle, and then tighten the knobs to secure the position.

6.2. Nastavitev vrtenja

The wall-side attachment allows for a swivel of up to 45 degrees left or right. The actual range of motion may vary depending on the size of your television. Gently push the TV to the desired left or right angle.

Diagram showing tilt adjustment of +30 to -30 degrees and wall distance of 62mm

Figure 6.1: Tilt Adjustment and Wall Distance

7. Vzdrževanje

Redno vzdrževanje zagotavlja dolgo življenjsko dobo in varno delovanje vašega stenskega nosilca za televizor.

  • Občasno preverite: Every few months, check that all screws and connections are tight and secure.
  • Čiščenje: Nosilec obrišite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
  • Mazanje: Gibljivi deli so zasnovani za nemoteno delovanje in običajno ne potrebujejo mazanja. Če postane gibanje oteženo, se obrnite na podporo strankam.

8. Odpravljanje težav

Če naletite na kakršne koli težave, si oglejte naslednje pogoste težave in rešitve.

TežavaMožen vzrokrešitev
Televizor ni poravnanWall plate or TV bracket not installed level.Carefully adjust the wall plate or TV bracket. Ensure all screws are tightened after adjustment.
Nosilec se zdi nestabilenScrews are loose or incorrect wall anchors used.Re-check all mounting screws for tightness. Ensure appropriate anchors were used for your wall type. Do not exceed weight capacity.
Difficulty adjusting tilt/swivelAdjustment knobs are too tight or mechanism is stiff.Loosen adjustment knobs slightly before attempting to move. If still stiff, contact customer support.

For issues not listed here, or if problems persist, please contact USX MOUNT customer support.

9. Garancija in podpora

USX MOUNT provides a 10-letna garancija na kakovost from the date of purchase for this product. This warranty covers manufacturing defects and ensures the product is free from defects in material and workmanship under normal use.

For warranty claims, technical support, or any questions regarding your USX MOUNT product, please contact our customer service team. Please have your purchase information and model number (USX-WM1026) ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.