GETPRO 60"W x 79"H x 3/8'' Glass

GETPRO Frameless Double Sliding Shower Door User Manual

Model: 60"W x 79"H x 3/8'' Glass, Brushed Nickel

Uvod

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your GETPRO Frameless Double Sliding Shower Door. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety. Retain this manual for future reference.

The GETPRO shower door features a frameless design with 3/8 inch clear tempered glass, a soft-close mechanism, and width adjustability, finished in Brushed Nickel.

Nastavitev in namestitev

Professional installation is recommended. Due to the weight of the glass panels, a minimum of two people is required for safe installation. Ensure all necessary tools and parts are available before starting.

Potrebna orodja (niso vključena):

Merilni trak
Svinčnik
Vrtalnik
Raven
Set izvijačev
Caulking Gun and Silicone Sealant (waterproof)
Uporabni nož
Zaščitna očala
Rokavice

Vsebina paketa:

Verify all components are present and undamaged before proceeding. Refer to the included parts list in your package.

Aluminijasta zgornja tirnica
Tempered Crystal Glass Panels (3/8 inch thick)
Stainless Steel Rollers
Ročaji
Transparent Seal Strips
Prag proti škropljenju
Mounting Hardware (screws, anchors, gaskets)

Koraki namestitve:

Pripravite otvoritev: Ensure the shower opening is plumb, level, and within the specified dimensions (57-60 inches width x 79 inches height). Clean the area thoroughly.
Install the Top Rail: Measure and mark the position for the top rail. Drill pilot holes and secure the aluminum top rail to the wall using appropriate fasteners. The top rail can be trimmed up to 3 inches for width adjustment.
Install the Bottom Guide Rail/Threshold: Position and secure the anti-splash threshold to the shower base, ensuring it is level and properly sealed with silicone.
Pritrditev valjev na steklene plošče: Secure the stainless steel rollers to the top edge of the tempered glass panels.
Obesite steklene plošče: With assistance, carefully lift and hang the glass panels onto the top rail rollers. Ensure the anti-jumping system is correctly engaged.
Namestitev ročajev: Attach the handles to the designated holes on the glass panels.
Apply Seal Strips: Install the transparent seal strips along the edges of the glass panels and the bottom guide to ensure a watertight seal.
Testno delovanje: Gently slide the doors to ensure smooth, quiet operation and proper soft-close functionality. Check for any obstructions or misalignment.
Tesnilne vrzeli: Apply a waterproof silicone sealant to all exterior joints and seams where the frame meets the wall and shower base. Allow adequate drying time before use.

Diagram, ki prikazuje dimenzije in komponente tuš kabin — Figure 1: Configuration Dimensions and Components. This diagram illustrates the key measurements and parts of the GETPRO sliding shower door, including model width, height, glass door width, walk-in width, walk-in height, handle length, glass thickness, and minimum guide width.

Figure 2: Fully Installed GETPRO Frameless Double Sliding Shower Door. This image shows the complete shower door system installed in a bathroom setting, highlighting its frameless design and brushed nickel finish.

Navodila za uporabo

Your GETPRO shower door is designed for smooth and quiet operation. The double sliding mechanism allows for entry from either side, and the soft-close feature ensures gentle closing.

Sliding the Doors: Use the handles to gently slide the glass panels along the top rail. Avoid forcing the doors.
Funkcija mehkega zapiranja: The integrated anti-collision braking devices on the top rail will automatically slow down and softly close the doors as they approach the end stops, preventing impacts and extending the door's lifespan.
Reverzibilna zasnova: The doors can be configured to bypass from either the left or right side, offering flexibility for various bathroom layouts.

Diagram illustrating the anti-collision soft-closing function — Figure 3: Exclusive Anti-Collision Closing Function. This graphic demonstrates how the soft-close mechanism works to prevent impacts and ensure quiet operation, thereby extending the shower door's lifetime.

Vzdrževanje

Regular cleaning and maintenance will preserve the appearance and functionality of your shower door.

Čiščenje stekla: The tempered glass panels feature a protective nano-coating for water repellency, making them easy to clean. Use a soft cloth and a non-abrasive glass cleaner or a mild soap solution. Avoid harsh chemicals, abrasive pads, or scouring powders, as these can damage the coating and finish.
Čiščenje okvirja in strojne opreme: Wipe down the brushed nickel frame and stainless steel hardware with a soft, damp cloth. For stubborn spots, use a mild, non-abrasive cleaner specifically designed for metal finishes.
Seal Strips: Periodically check the transparent seal strips for wear or damage. Replace them if they become discolored or lose their sealing effectiveness to prevent leaks.
Vzdrževanje valja: The stainless steel rollers are designed for durability. If the doors do not slide smoothly, clean the top rail and rollers to remove any debris. Avoid applying oil or grease to the rollers unless specifically instructed by customer support.

Illustration of water repellent nano coating on glass — Figure 4: Water Repellent Technology with Protective Nano Coating. This image demonstrates the effectiveness of the nano-coating in repelling water, contributing to easier cleaning and maintenance of the glass panels.

Odpravljanje težav

Težava	Možen vzrok	rešitev
Vrata ne drsijo gladko.	Debris on the top rail or rollers; misaligned rollers.	Clean the top rail and rollers. Check for proper alignment of the rollers and adjust if necessary.
Water leaks from the shower door.	Damaged or improperly installed seal strips; insufficient silicone sealant.	Inspect and replace worn seal strips. Reapply silicone sealant to all exterior joints and seams. Ensure the anti-splash threshold is correctly installed.
Doors do not close completely or softly.	Obstruction in the soft-close mechanism; misaligned door.	Check the soft-close mechanism for any obstructions. Verify the doors are properly aligned on the track.
Steklo je motno ali obarvano.	Usedline trde vode; neprimerna čistilna sredstva.	Use a mild, non-abrasive glass cleaner. For hard water stains, use a vinegar-based solution or specialized hard water remover, then rinse thoroughly. Avoid abrasive cleaners.

If you encounter issues not listed here or require further assistance, please contact GETPRO customer support.

Specifikacije izdelka

Znamka: GETPRO
Model: Dvojna drsna vrata za prho brez okvirja
Dimenzije (celotne): 57-60 inches (W) x 79 inches (H)
Debelina stekla: 3/8 palca (10 mm)
Vrsta stekla: ANSI certified Tempered Crystal Glass
Walk-in Opening: Up to 35 inches (W) x 73 inches (H)
Prilagoditev širine: Up to 3 inches by trimming the top track rail
Končaj: Brušen nikelj
Material: Aluminum (top rail), Stainless Steel (rollers), ABS (components), Glass
Lastnosti: Double Sliding, Frameless Design, Soft Close, Anti-Collision Braking Devices, Anti-Jumping System, Water Repellent Nano Coating, Reversible Installation
Teža artikla: Približno 159.7 funtov

Diagram showing extra height feature of the shower door — Figure 5: Extra Height Feature. This image highlights the 79-inch overall height and 73-inch maximum walk-in height, indicating it is taller than many standard shower doors.

Close-up of the frameless design with anti-jumping system and sturdy top rail — Figure 6: Frameless Design with Upgraded Anti-Jumping System and Ultra Sturdy Top Rail. This detailed view shows the aluminum alloy top rail and the rollers with the anti-jumping mechanism, emphasizing durability and safety.

Shatterproof and tempered safety glass demonstration — Figure 7: Shatterproof and Tempered Safety Glass. This image illustrates the strength and safety features of the 3/8 inch (10mm) tempered glass, meeting ANSI certification standards.

Informacije o garanciji

GETPRO provides a Lifetime Warranty for hardware components (excluding man-made damage) for this glass sliding door. In the event of a proven defect, GETPRO will replace the product or parts.

This warranty covers manufacturing defects in materials and workmanship under normal use and service. It does not cover damage resulting from improper installation, misuse, abuse, accident, neglect, or unauthorized repairs or modifications.

Podpora uporabnikom

For any concerns, questions, or assistance with your GETPRO shower door, please contact the GETPRO customer service team. Please have your model number and purchase information ready when contacting support.

Contact information can typically be found on the GETPRO official webspletnega mesta ali prek vaše nakupovalne platforme.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.