BIG RED T830025-1 Heavy Duty Hydraulic Steel Service Floor Jack Instruction Manual

Uvod

Thank you for choosing the BIG RED T830025-1 Heavy Duty Hydraulic Steel Service Floor Jack. This manual provides important information for the safe operation, maintenance, and troubleshooting of your new floor jack. Please read and understand all instructions before use to ensure proper function and prevent injury or damage.

Image: The BIG RED T830025-1 Floor Jack, a red hydraulic jack with a black handle and wheels.

Varnostne informacije

OPOZORILO: Neupoštevanje teh navodil lahko povzroči hude telesne poškodbe ali materialno škodo.

• Pred uporabo dvigalke vedno preberite in razumite celoten priročnik.
• Ne prekoračite nazivne nosilnosti 3 tone (6,000 lbs).
• Uporabljajte samo na trdi, ravni površini.
• Always use jack stands to support the vehicle immediately after lifting. The jack is a lifting device only, not a vehicle support device.
• Prepričajte se, da je vozilo v parkirni prestavi (ali prestavi pri ročnem menjalniku) in da je parkirna zavora aktivirana. Blokirajte kolesa, ki jih ne dvigujete.
• Obremenitev namestite na sredino sedeža. Obremenitve izven središča lahko povzročijo prevrnitev dvigalke.
• Roke in noge držite stran od gibljivih delov in območja pod vozilom.
• Dvigalke ne spreminjajte in je ne uporabljajte za druge namene, kot je predvidena.
• Nosite ustrezno osebno zaščitno opremo, kot so zaščitna očala.
• Inspect the jack before each use for any damage, leaks, or loose parts. Do not use if damaged.
• Tovor spuščajte počasi in previdno.

Namestitev in začetna priprava

Before using your BIG RED T830025-1 floor jack, ensure it is properly assembled and prepared.

1. Priključite ročaj: Insert the two handle sections together. Place the assembled handle into the handle socket on the jack.
2. Pritrdite ročaj: Turn the handle clockwise until it is fully tightened and secured in the socket. This also closes the release valve for lifting.
3. Purge Air from Hydraulic System (Bleeding):
   • With the jack fully lowered, remove the oil filler plug (if present, refer to diagram in full manual).
   • Ročico hitro pritisnite 10-15-krat brez obremenitve.
   • Replace the oil filler plug. This helps remove any trapped air.

Image: Diagram showing the wide lifting range and steps for connecting the handle and pumping to raise the saddle.

Navodila za uporabo

Follow these steps for safe and effective operation of your floor jack.

Lifting a Vehicle:

1. Pripravite vozilo: Park the vehicle on a hard, level surface. Engage the parking brake and place the transmission in park (or lowest gear for manual). Block the wheels that are not being lifted.
2. Postavite Jack: Roll the jack under the vehicle, positioning the saddle directly under the manufacturer's recommended lifting point. Consult your vehicle's owner's manual for proper lifting points.
3. Dvignite vozilo: With the handle fully tightened clockwise (release valve closed), pump the handle up and down to raise the saddle. Continue pumping until the vehicle is lifted to the desired height.
4. Install Jack Stands: Immediately after lifting, place appropriately rated jack stands under the vehicle's frame or designated support points. Ensure the vehicle is securely resting on the jack stands before performing any work.
5. Slightly Lower Jack: Once jack stands are in place, slowly turn the handle counter-clockwise to slightly lower the jack until the vehicle's weight is fully supported by the jack stands. The jack should remain in contact with the vehicle as a secondary safety measure.

Lowering a Vehicle:

1. Raise Vehicle Slightly: Nekajkrat pritisnite ročico dvigalke, da vozilo rahlo dvignete z dvižnih stojal.
2. Odstranite stojala: Previdno odstranite dvižne stojala izpod vozila.
3. Spodnje vozilo: Slowly turn the handle counter-clockwise to open the release valve. The vehicle will begin to lower. Control the lowering speed by adjusting how much you turn the handle.
4. Odstrani Jacka: Once the vehicle is fully lowered to the ground, remove the floor jack.

Image: Illustration of the jack's steel front wheels, 360-degree rotation casters, and its 6000 lbs rated capacity for cars, pickups, and MPVs. A warning states the product is a lifting tool only and requires jack stands for under-vehicle work.

Vzdrževanje

Redno vzdrževanje zagotavlja dolgo življenjsko dobo in varno delovanje vaše talne dvigalke.

• Mazanje: Vse gibljive dele občasno namažite z lahkim strojnim oljem.
• Raven hidravličnega olja: Check the hydraulic oil level every three months. With the jack fully lowered and on a level surface, remove the oil filler plug. The oil level should be just below the filler hole. Add high-quality hydraulic jack oil if needed. Do not overfill.
• Čiščenje: Keep the jack clean from dirt, grease, and corrosive materials.
• Shranjevanje: Store the jack in a dry, protected area with the ram fully retracted to prevent rust and seal damage.
• Pregled: Before each use, inspect for any signs of damage, leaks, or wear. Pay close attention to welds, wheels, and the hydraulic cylinder.

Odpravljanje težav

Ta razdelek obravnava pogoste težave, na katere lahko naletite pri uporabi talne dvigalke.

Specifikacije

Key technical specifications for the BIG RED T830025-1 Floor Jack.

• Model: T830025-1
• Znamka: VELIKA RDEČA
• Kapaciteta: 3 ton (6,000 funtov)
• Material: Legirano jeklo
• Minimum Lifting Height: 5-1/8 palcev (13.0 cm)
• Največja višina dviga: 18-5/16 palcev (46.5 cm)
• Mere izdelka (D x Š x V): 57.2 x 32.8 x 17.5 cm (22.5 x 12.9 x 6.90)
• Dolžina ročaja: 39.3 palcev (99.8 cm)
• Teža artikla: 27.34 kg (60.27 lbs)
• Vrsta servisa vozila: Car, Light Trucks, SUVs
• Lastnosti: Single Piston Quick Lift Pump, Detachable Handle, Foam Bumper, 360-degree Swivel Casters, Built-in Safety Valve.

Image: Detailed product specification diagram showing the jack's dimensions, minimum and maximum lifting heights, and handle length.

Garancija in podpora

This BIG RED T830025-1 Floor Jack comes with a 1-letna garancija od datuma nakupa, ki krije napake v materialu in izdelavi pri normalni uporabi.

For warranty claims, technical assistance, or to order replacement parts, please contact BIG RED customer support. Keep your purchase receipt as proof of purchase.

Contact information for BIG RED customer support can typically be found on the manufacturer's official webspletnem mestu ali na embalaži izdelka.