XPG 75261186
Uporabniški priročnik za napajalnik XPG Core Reactor II
Model: 75261186
1. Uvod
The XPG Core Reactor II Power Supply is a high-performance component designed to provide stable and efficient power to your computer system. With 750W of power and 80 Plus Gold certification, it ensures high energy efficiency. Its Full Modular design simplifies installation and cable management. The Active PFC (Power Factor Correction) feature further enhances overall system performance by delivering consistent and reliable power, crucial for demanding PC operations.
2. Varnostne informacije
Please read and understand all safety instructions before installing or operating the power supply. Failure to do so may result in personal injury or damage to the product or other components.
- Električna varnost: Always disconnect the power cord from the wall outlet before installing, removing, or cleaning the power supply. Ensure your hands are dry when handling electrical components.
- Pravilna ozemljitev: Ensure your computer system and the power outlet are properly grounded to prevent electrical shock.
- Prezračevanje: Do not block the ventilation openings of the power supply. Ensure adequate airflow around the unit to prevent overheating.
- Okolje: Operate the power supply in a dry, well-ventilated environment. Avoid exposure to moisture, dust, and extreme temperatures.
- Ravnanje: Handle the power supply with care. Avoid dropping or subjecting it to strong impacts.
- Pooblaščeni servis: Do not attempt to open or repair the power supply yourself. Refer all servicing to qualified service personnel. Opening the unit will void the warranty.
3. Vsebina paketa
Verify that all items listed below are present in your package. If any items are missing or damaged, please contact your retailer or XPG support.
- XPG Core Reactor II Power Supply Unit
- Modular Cable Set (including ATX 24-pin, EPS/CPU 4+4-pin, PCIe 6+2-pin, SATA, and Peripheral cables)
- AC napajalni kabel
- Montažni vijaki
- Uporabniški priročnik (ta dokument)

Image: The XPG Core Reactor II Power Supply unit, showcasing its black finish, fan grille, and modular cable ports. The image also implies the presence of various modular cables for system connection.
4. Nastavitev in namestitev
Follow these steps to properly install your XPG Core Reactor II Power Supply into your computer system.
- Pripravite svoj sistem: Prepričajte se, da je računalnik popolnoma izklopljen in izklopljen iz stenske vtičnice. Odprite ohišje računalnika.
- Remove Old Power Supply (if applicable): Disconnect all cables from your old power supply and remove its mounting screws. Carefully slide it out of the case.
- Mount the New Power Supply: Position the XPG Core Reactor II Power Supply in the designated PSU bay of your computer case. Ensure the fan is oriented correctly (typically facing downwards or upwards depending on case design and ventilation). Secure it with the provided mounting screws.
- Priključite modularne kable: Due to its full modular design, you only need to connect the cables required for your components.
- Motherboard Power: Connect the 24-pin ATX cable to the corresponding port on the power supply and the motherboard.
- Moč procesorja: Connect the 4+4-pin EPS/CPU cable to the power supply and the CPU power connector(s) on your motherboard.
- Graphics Card Power: Connect the 6+2-pin PCIe cables to the power supply and your graphics card(s). Use separate cables for each connector on high-power GPUs if possible.
- Naprave SATA: Connect SATA power cables to your SSDs, HDDs, and optical drives.
- Periferne naprave: Connect peripheral (Molex) cables for case fans or other accessories as needed.
- Upravljanje kablov: Kable lepo napeljite, da izboljšate pretok zraka in estetiko v ohišju.
- Zaprite ohišje in priključite napajanje: Once all connections are secure, close your computer case. Connect the AC power cord to the power supply and then to a wall outlet.
5. Navodila za uporabo
Operating the XPG Core Reactor II Power Supply is straightforward once installed.
- Vklop: Ensure the power switch on the back of the power supply (next to the AC inlet) is in the 'I' (On) position. Then, power on your computer using the case's power button.
- Učinkovitost: The 80 Plus Gold certification indicates high energy efficiency, meaning less wasted heat and lower electricity consumption compared to less efficient power supplies.
- Active PFC: The Active Power Factor Correction feature automatically adjusts the input current waveform to improve the power factor, leading to more stable and cleaner power delivery to your components.
- Ugasniti: To shut down your system, use the operating system's shutdown function. For complete power disconnection, switch the power supply's switch to the 'O' (Off) position and unplug the AC power cord.
6. Vzdrževanje
Redno vzdrževanje pomaga zagotoviti dolgo življenjsko dobo in optimalno delovanje vašega napajalnika.
- Odstranjevanje prahu: Periodically (e.g., every 3-6 months), power off and unplug your computer. Use compressed air to gently blow dust out of the power supply's fan grille and ventilation openings. Hold the fan blades to prevent them from spinning rapidly during cleaning, which can damage the bearings.
- Pregled kabla: Occasionally check all connected modular cables to ensure they are securely seated and free from damage.
- Okoljski pregled: Ensure the operating environment remains clean, dry, and within recommended temperature ranges.
7. Odpravljanje težav
If you encounter issues with your XPG Core Reactor II Power Supply, refer to the following common troubleshooting steps:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Sistem se ne vklopi. | Power cord not connected, PSU switch off, loose internal cables, faulty component. |
|
| Sistem se vklopi, vendar se takoj izklopi. | Overload, overheating, short circuit, faulty component. |
|
| Nenavaden hrup iz napajalnika. | Fan obstruction, faulty fan bearing. |
|
If the problem persists after trying these steps, please contact XPG customer support for further assistance.
8. Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Znamka | XPG |
| Ime modela | 75261186 |
| Izhodna vattage | 750 vatov |
| Certifikat učinkovitosti | 80 plus zlato |
| Faktor oblike | ATX |
| Modularnost | Popolna modularna |
| Vrsta PFC | Aktivni PFC |
| Metoda hlajenja | zrak |
| Vrsta priključka | ATX (24 Pin, EPS, PCIe, SATA, Peripheral) |
| Teža predmeta | 7.35 funta (približno 3.33 kg) |
| Dimenzije paketa | 13.39 x 8.43 x 6.38 palca (približno 34 x 21.4 x 16.2 cm) |
| barva | Črna |
| Največja vhodna voltage | 120 voltov (AC) |
9. Garancija in podpora
For warranty information, technical support, or service inquiries regarding your XPG Core Reactor II Power Supply, please visit the official XPG webspletno mesto ali se obrnite neposredno na njihovo podporo strankam.
You can also visit the official XPG Store on Amazon for product information and support resources:
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.