1. Uvod
This manual provides detailed instructions for the GAIN EXPRESS WQM-397 5-in-1 Water Quality Tester. This device is designed for accurate measurement of pH, Total Dissolved Solids (TDS), Salinity, Specific Gravity (S.G), and Temperature. It features online monitoring via the Tuya Smart app and is suitable for various applications including aquariums, hydroponics, pools, and aquaculture.
2. Značilnosti izdelka
- Večnamensko merjenje: Measures pH, TDS, Salinity, Specific Gravity (S.G), and Temperature.
- APP Remote Control (Tuya Smart): Monitor and manage measurements conveniently from your smartphone or other smart devices.
- Širok nabor aplikacij: Ideal for aquariums, hydroponics, laboratories, spas, swimming pools, and other water quality testing programs.
- Funkcija alarma: Set safety ranges for each parameter via the app. Receive notification alerts on your smartphone if test results fall outside the defined limits.
- Kompaktna zasnova: The device measures 100 x 75 x 22 mm and weighs approximately 120 grams, enhancing portability and practicality.
3. Vsebina paketa
Preden nadaljujete z namestitvijo, preverite, ali so v paketu vsi elementi.
- 1 x GAIN EXPRESS WQM-397 5-in-1 Water Quality Tester
- 1 x pH Electrode
- 1 x EC/TDS/Salinity/S.G Electrode
- 1 x napajalnik
- 1 x Accessory Pack (including pH buffer powders for calibration, suction cups, screws)
- 1 x uporabniški priročnik
Image 3.1: Contents of the GAIN EXPRESS WQM-397 package, including the main unit, electrodes, power adapter, and calibration powders.
4. Izdelek je končanview
Familiarize yourself with the components and controls of the WQM-397 tester.
Image 4.1: Labeled diagram showing the main unit, LCD screen, Power/WiFi button, Mode button, Temp/Calibration button, Charging port, pH electrode, and EC electrode.
- LCD zaslon: Displays measurement readings and status.
- Power/WiFi Button: Turns the device on/off and controls WiFi connectivity.
- Gumb za način: Cycles through different measurement parameters (pH, TDS, Salinity, S.G, Temperature).
- Temp/Calibration Button: Used for temperature unit selection and calibration procedures.
- Vrata za polnjenje: Za priključitev napajalnika.
- pH elektroda: Sensor for pH measurement.
- EC Electrode: Sensor for TDS, Salinity, and Specific Gravity measurements.
5. Nastavitev
5.1 Začetna nastavitev naprave
- Priključite elektrode: Carefully connect the pH electrode and the EC electrode to their respective ports on the main unit. Ensure connections are secure.
- Vklop: Connect the power adapter to the charging port and a power outlet. Press the Power/WiFi button to turn on the device.
- Umestitev: Use the provided suction cups or screws to mount the main unit in a suitable location, ensuring the electrodes can be submerged in the water to be tested.
5.2 App Installation and Connection (Tuya Smart)
- Prenesite aplikacijo: Download the "Tuya Smart" app from your smartphone's app store (available for iOS and Android).
- Registracija/Prijava: Odprite aplikacijo in registrirajte nov račun ali se prijavite z obstoječim.
- Dodaj napravo: In the Tuya Smart app, tap the "+" icon to add a new device. Follow the on-screen instructions to connect the WQM-397 tester to your home WiFi network. Ensure your device's WiFi indicator is blinking, indicating pairing mode.
- Potrditev: Once connected, the device will appear in your Tuya Smart app, allowing you to monitor readings remotely.
Slika 5.1: Konecview of the Tuya Smart app interface, displaying various water quality parameters and settings.
Image 5.2: Illustration of mobile application monitoring, showing real-time data and compatibility with iOS and Android.
6. Navodila za uporabo
6.1 Izvajanje meritev
- Submerge Electrodes: Ensure both the pH and EC electrodes are fully submerged in the water sample you wish to test.
- Izberite način: Press the 'MODE' button on the device to cycle through the different measurement parameters (pH, TDS, Salinity, S.G, Temperature). The selected parameter will be displayed on the LCD screen.
- branja: Allow a few moments for the readings to stabilize on the LCD screen. The current readings will also be updated in the Tuya Smart app.
Slika 6.1: Primerample of pH measurement, showing the device displaying a pH value and temperature, with a pH scale for reference.
Slika 6.2: Primerample of TDS measurement, illustrating the device displaying a TDS value and temperature, with a chart indicating TDS levels.
Slika 6.3: Primeramples of Salinity and Specific Gravity (S.G) measurements, showing the device displaying respective values and temperatures in different aquatic environments.
6.2 Funkcija alarma
The alarm function allows you to set custom safety ranges for each parameter (pH, TDS, Salinity, S.G, Temperature) directly within the Tuya Smart app. If any measured value falls below the lower limit or exceeds the upper limit, the app will send a notification alert to your smartphone.
6.3 Izvoz podatkov
The Tuya Smart app supports exporting measurement data, typically in Excel format, for further analysis and record-keeping. Refer to the app's specific settings for data export options.
7. Umerjanje
Regular calibration ensures the accuracy of your water quality tester. The WQM-397 supports easy calibration using standard buffer solutions.
- Priprava puferskih raztopin: Use the provided pH buffer powders (pH 4.00, pH 6.86, pH 9.18) to prepare standard calibration solutions according to their instructions.
- Umerjanje pH: Submerge the pH electrode into the first pH buffer solution (e.g., pH 6.86). Press and hold the 'TEMP/CAL' button until the calibration mode is activated. Follow the on-screen prompts or app instructions to complete the calibration for that point. Repeat for other pH buffer solutions as needed.
- TDS/Salinity/S.G Calibration: Refer to the detailed instructions in the Tuya Smart app or the device's specific manual section for EC/TDS/Salinity/S.G calibration, as this may require specific standard solutions.
- Rinse Electrodes: Always rinse electrodes thoroughly with distilled water between different buffer solutions and after calibration.
8. Vzdrževanje
8.1 Nega elektrod
- Izpiranje: Always rinse the electrodes with distilled or deionized water before and after each use to prevent contamination.
- Shranjevanje: Store pH electrodes in a suitable electrode storage solution or a pH 4 buffer solution when not in use. Do not store dry. EC electrodes can typically be stored dry after rinsing.
- Čiščenje: If electrodes become dirty or readings become unstable, clean them gently according to the manufacturer's recommendations (e.g., soaking in a mild cleaning solution).
- Zamenjava: Electrodes have a limited lifespan and may need replacement over time to maintain accuracy.
8.2 Čiščenje naprave
Obrišite glavno enoto z mehko damp cloth. Do not use abrasive cleaners or submerge the main unit in water.
9. Odpravljanje težav
- Netočni odčitki:
- Ensure electrodes are clean and properly submerged.
- Perform calibration with fresh buffer solutions.
- Check electrode lifespan; replace if necessary.
- Naprava se ne vklopi:
- Verify power adapter connection and power outlet functionality.
- Težave z WiFi povezavo:
- Prepričajte se, da je naprava v dosegu vašega usmerjevalnika WiFi.
- Check if the WiFi indicator on the device is blinking for pairing mode.
- Restart the device and your router.
- Confirm correct WiFi password entry in the Tuya Smart app.
- Aplikacija ne prikazuje podatkov:
- Ensure the device is connected to WiFi and linked in the Tuya Smart app.
- Preverite internetno povezavo na pametnem telefonu.
- Ponovno zaženite aplikacijo.
10. Specifikacije
Detailed technical specifications for the GAIN EXPRESS WQM-397 Water Quality Tester.
Image 10.1: Detailed specifications table for the 5-in-1 water quality tester.
| Parameter | Merilno območje | Resolucija | Natančnost |
|---|---|---|---|
| pH | 0.00 ~ 14.00 pH | 0.01 pH | ±0.1 pH |
| TDS | 0 ~ 19900 ppm (0 ~ 199.0 ppt) | 1 ppm (<1999ppm); 10 ppm (>1999ppm) | ± 2% FS |
| Slanost | 0 ~ 199.0 ppt | 1 ppm (<1999ppm); 10 ppm (>1999ppm) | ± 2% FS |
| SG | 0.990 ~ 1.400 | 0.001 | |
| Temperatura | 0°C ~ 50°C (32°F ~ 122°F) | 0.1 °C (0.2 °F) | ±1.0°C |
| Temperaturna kompenzacija | 0°C ~ 50°C | ||
| Delovna temperatura | 0°C ~ 50°C | ||
| Dimenzije | 100 x 75 x 22 mm |
- Proizvajalec: Gain Express Holdings Ltd.
- Referenca izdelka: WQM-397
- Mere izdelka (D x Š x V): 15.6 x 18.4 x 6.4 cm; 490 grams (packaged)
- Priložene baterije: št
- Potrebne baterije: No (operates via power adapter)
- Država izvora: Kitajska
11. Garancija in podpora
Information regarding product warranty and dedicated customer support channels was not provided in the product details. Please refer to your purchase documentation or contact the retailer for specific warranty terms and support options.
Razpoložljivost rezervnih delov: Informacije o razpoložljivosti rezervnih delov trenutno niso na voljo.
12. Aplikacije
The GAIN EXPRESS WQM-397 Water Quality Tester is suitable for a wide range of applications:
Image 12.1: Visual representation of various applications including Hydroponics, Industrial Sewage, Swimming Pools, Aquaculture, Tap Water, and Laboratories.
- Hidroponika: Spremljanje hranilnih raztopin za optimalno rast rastlin.
- Akvariji: Maintaining healthy aquatic environments for fish and plants.
- Swimming Pools & Spas: Ensuring water safety and quality.
- Aquaculture: Managing water parameters for fish farming.
- Laboratories: General water quality analysis.
- Industrial Sewage: Basic monitoring of wastewater.
- Tap Water: Checking the quality of drinking water.