Uporabniški priročnik za projektor za domači kino Nureva NPSi-1

1. Uvod

Thank you for choosing the Nureva NPSi-1 Home Theatre Projector. This manual provides essential information for the safe and efficient operation of your projector. Please read it thoroughly before use and retain it for future reference. The NPSi-1 is designed to deliver a high-quality viewing experience with Full HD 1080p resolution and versatile connectivity options.

2. Pomembne varnostne informacije

• Električna varnost: Always connect the projector to a grounded power outlet. Do not expose the projector to rain or moisture. Disconnect power during lightning storms or when unused for long periods.
• Ogrevanje in prezračevanje: Ensure adequate ventilation around the projector. Do not block ventilation openings. Avoid placing the projector on soft surfaces that may block airflow.
• Lamp Varnost: Projektor lamp operates at high temperatures. Allow the projector to cool down before moving it or performing maintenance. Never look directly into the projector lens when the lamp je vklopljen, saj lahko povzroči poškodbe oči.
• Ravnanje: S projektorjem ravnajte previdno. Pazite, da vam ne pade ali da ga ne izpostavljate močnim udarcem.
• Čiščenje: Use a soft, dry cloth for cleaning. For the lens, use a lens cleaning cloth and solution specifically designed for optical surfaces.

3. Vsebina paketa

Prosimo, preverite, ali so vsi predmeti prisotni in v dobrem stanju:

• Nureva NPSi-1 Projector
• Daljinski upravljalnik
• HDMI kabel
• Napajalni kabel
• Uporabniški priročnik (ta dokument)

4. Izdelek je končanview

4.1 Spredaj in zgoraj View

Slika 4.1: Vrh view of the Nureva NPSi-1 projector, showing the lens assembly on the left and the integrated control panel on the top surface. The control panel includes navigation buttons and indicator lights.

Slika 4.2: Spredaj view of the Nureva NPSi-1 projector, highlighting the projection lens. This view shows the primary output component of the projector.

The top surface features an intuitive control panel for direct operation, including power, menu navigation, and input selection buttons. The front houses the projection lens, which can be adjusted for focus and zoom.

4.2 Zadnja plošča in povezljivost

Slika 4.3: Rear panel of the Nureva NPSi-1 projector, displaying a comprehensive array of connectivity ports including HDMI, VGA, USB, audio inputs/outputs, and network connections.

Slika 4.4: Detailed close-up of the Nureva NPSi-1 projector's rear connectivity panel, showing individual ports such as VGA 1, HDMI 1, HDMI 2, USB, Network (RJ45), Audio In/Out, Composite Video, and RS-232.

The rear panel provides extensive connectivity options for various devices:

• HDMI 1 / HDMI 2: For connecting high-definition digital sources like Blu-ray players, gaming consoles, or computers.
• VGA 1 / VGA Out / VGA 2: For connecting computers or other analog video sources.
• USB: Za predvajanje medijev ali posodobitve vdelane programske opreme.
• Omrežje (RJ45): Za nadzor in spremljanje omrežja.
• Audio In / Audio Out: Za priklop zunanjih avdio naprav.
• Kompozitni video (RCA): Za video vire standardne ločljivosti.
• RS-232: Za serijski nadzor.
• AC napajanje: Za priključitev napajalnega kabla.

4.3 Oznaka izdelka

Slika 4.5: Od blizu view of the product label on the Nureva NPSi-1 projector, showing the model number (NPSi-1), serial number (AC011Y15W450064), and input power requirements (AC 100-240V, 50/60Hz, 3.5A). This label also includes regulatory compliance marks.

The product label, typically located on the underside or rear of the projector, contains important information such as the model number, serial number, and electrical specifications. For support, please refer to the model number NPSi-1 and serial number AC011Y15W450064.

4.4 Stran in dno Views

Slika 4.6: Stran view of the Nureva NPSi-1 projector, showing the extensive ventilation grilles necessary for heat dissipation during operation.

Slika 4.7: Spodaj view of the Nureva NPSi-1 projector, featuring adjustable feet for leveling and stability, along with mounting points for ceiling installation.

The sides of the projector feature ventilation grilles to ensure proper airflow and prevent overheating. The bottom panel includes adjustable feet for precise leveling and mounting points for ceiling or rear projection setups.

5. Nastavitev

5.1 Namestitev

Pri namestitvi projektorja upoštevajte naslednje:

• Projekcijska površina: Project onto a flat, white, or light-colored surface for best results. A dedicated projector screen is recommended.
• Razdalja: Adjust the projector's distance from the screen to achieve the desired image size. Refer to the projection distance chart (not provided, consult product specifications for typical throw ratios).
• Kot: Position the projector as perpendicular to the screen as possible to minimize keystone distortion.
• Prezračevanje: Ensure at least 30 cm (12 inches) of clear space around the projector's ventilation openings.
• Montaža: The projector supports Table Top, Ceiling Projection, and Rear Projection. Use appropriate mounting hardware for ceiling installations.

5.2 Priključitev napajanja

1. Connect the supplied power cord to the AC Power inlet on the rear of the projector.
2. Drugi konec napajalnega kabla priključite v ozemljeno električno vtičnico.

5.3 Priključitev vhodnih virov

Connect your video and audio sources to the appropriate ports on the rear panel (refer to Figure 4.3 and 4.4).

• HDMI: Use the provided HDMI cable to connect your source device (e.g., Blu-ray player, laptop) to either HDMI 1 or HDMI 2 port.
• VGA: Connect a computer to the VGA 1 or VGA 2 port using a VGA cable.
• USB: Insert a USB drive for media playback into the USB port.
• Avdio: If using analog video inputs (VGA, Composite), connect separate audio cables to the Audio In ports. Use Audio Out to connect to external speakers.

6. Navodila za uporabo

6.1 Vklop/izklop

1. Za vklop pritisnite Moč button on the projector's control panel or the remote control. The power indicator light will change.
2. Za izklop pritisnite Moč button again. A confirmation message may appear. Confirm to shut down. Allow the projector to cool down before unplugging.

6.2 Prilagoditev slike

• Fokusni obroč: Za izostritev slike zavrtite obroč za ostrenje okoli objektiva.
• Obroč za povečavo: Rotate the zoom ring (if available) to adjust the image size without moving the projector.
• Trapezni popravek: If the image appears trapezoidal, use the keystone correction function (usually found in the OSD menu or via dedicated buttons on the remote) to square the image.
• Projection Tilt: Use the adjustable feet on the bottom of the projector to fine-tune the vertical angle.
• Barvni popravek: Access the OSD menu to adjust color settings such as brightness, contrast, saturation, and color temperature.

6.3 Izbira vhodnega vira

Pritisnite Vir or Vnos button on the projector or remote control to cycle through available input sources (HDMI 1, HDMI 2, VGA 1, VGA 2, USB, Composite Video, etc.).

6.4 Zaslonski meni (OSD)

Pritisnite meni button on the projector or remote to access the OSD menu. Use the navigation buttons (up, down, left, right) to browse options and the OK or Vnesite button to select. Press meni spet oz Izhod da zaprete meni.

7. Vzdrževanje

7.1 Čiščenje projektorja

• Zunanjost: Obrišite projektor casing with a soft, lint-free cloth. For stubborn marks, dampen the cloth slightly with water, then wipe dry. Avoid abrasive cleaners or solvents.
• Objektiv: Gently clean the lens with a professional lens cleaning cloth and lens cleaning fluid. Do not use abrasive materials or excessive force, as this can scratch the lens.
• Zračne reže: Use a soft brush or a can of compressed air to remove dust from the air intake and exhaust vents. Ensure the projector is off and unplugged before cleaning vents.

7.2 Lamp Zamenjava

Projektor lamp ima omejeno življenjsko dobo. Ko lamp life indicator appears or the image brightness significantly decreases, the lamp may need replacement. Refer to the specific lamp navodila za zamenjavo, ki so priložena nadomestnemu lamp or consult a qualified service technician. Always ensure the projector is unplugged and completely cooled down before attempting lamp zamenjava.

8. Odpravljanje težav

9. Specifikacije

10. Garancija in podpora

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or visit the official Nureva website. When contacting support, please have your model number (NPSi-1) and serial number (AC011Y15W450064) readily available.

You can find more information about Nureva products and support at www.nureva.com