ESKY 150 EC

ESKY 150 EC Micro RC Helicopter Instruction Manual

Model: 150 EC

Uvod

This manual provides essential instructions for the safe and effective operation of your ESKY 150 EC Micro RC Helicopter. The 150 EC is a third-generation micro remote-controlled helicopter designed for ease of operation. It features a 6-axis gyroscope for stable flight, atmospheric pressure and altitude hold capabilities, hovering, and a controllable flight path. It also includes a one-button shutdown function for emergency situations.

Kaj je v škatli

Carefully unpack all components and ensure all items listed below are present. If any items are missing or damaged, please contact customer support.

  • 1 x helikopter ESKY 150 EC
  • 1 x MINI 6X 6-Channel 2.4GHz Transmitter (Remote Control)
  • 1 x 1S 3.7V 150mAh 20C Li-Po Battery (for helicopter)
  • 2 x Main Blades (spare)
  • 1 x Tail Blade (spare)
  • 1 x USB polnilec
  • 2 x Screw Drivers
  • 1 x Uporabniški priročnik (ta dokument)
Contents of the ESKY 150 EC Micro RC Helicopter package, including the helicopter, remote control, spare blades, battery, USB charger, and tools.

Image: All components included in the ESKY 150 EC package.

Konec izdelkaview

Helicopter Components

Stran view of the ESKY 150 EC Micro RC Helicopter, yellow with blue and white accents.

Slika: Stran view of the ESKY 150 EC helicopter.

The ESKY 150 EC helicopter features a durable frame, main rotor blades, a tail rotor, landing skids, and a removable canopy. The main rotor provides lift and control, while the tail rotor controls yaw (left/right rotation).

Daljinski upravljalnik (oddajnik)

The MINI 6X 6-Channel 2.4GHz transmitter is used to control the helicopter. Familiarize yourself with its various controls:

Labeled diagram of the MINI 6X 6-Channel 2.4GHz Remote Control, showing Mode Switch, Power LED, Throttle Cut Switch, Rudder, Throttle, Aileron, Elevator, Trim controls, and Power Switch.

Image: Labeled diagram of the MINI 6X Remote Control.

  • Stikalo načina: Changes flight modes (e.g., beginner/advanced).
  • LED indikator napajanja: Prikazuje stanje napajanja.
  • Stikalo za rezanje plina: Immediately cuts power to the motor.
  • Rudder (Left/Right): Controls the helicopter's yaw.
  • Throttle (Up/Down): Controls the main rotor speed and altitude.
  • Aileron (Left/Right): Controls the helicopter's roll (side-to-side movement).
  • Elevator (Up/Down): Controls the helicopter's pitch (forward/backward movement).
  • Trim Controls (Throttle, Rudder, Aileron, Elevator): Fine-tune controls to correct unwanted drift.
  • Stikalo za vklop: Turns the remote control ON/OFF (hold down for ON/OFF).

Nastavitev

1. Polnjenje baterije helikopterja

The helicopter uses a 1S 3.7V 150mAh Li-Po battery. Always use the provided USB charger.

  1. Connect the USB charger to a USB power source (e.g., computer USB port, USB wall adapter).
  2. Connect the helicopter battery to the USB charger. Ensure the polarity is correct.
  3. Indikatorska lučka na polnilniku bo prikazovala stanje polnjenja (za specifične vzorce lučke glejte navodila za polnilnik).
  4. Ko je polnjenje končano, baterijo odklopite iz polnilnika. Ne prepolnjujte je.
Two USB chargers with Li-Po batteries connected, illustrating the charging process.

Image: Connecting the Li-Po battery to the USB charger.

2. Installing the Helicopter Battery

Ensure the helicopter is powered off before installing the battery.

  1. Gently remove the helicopter's canopy to access the battery compartment.
  2. Insert the charged Li-Po battery into the compartment.
  3. Connect the battery plug to the helicopter's power port.
  4. Carefully reattach the canopy.
Helicopter with its canopy removed, showing the internal battery compartment.

Image: Helicopter with canopy removed, revealing the battery compartment.

Helicopter with the Li-Po battery correctly inserted into its compartment.

Image: Battery inserted into the helicopter.

3. Vklop in povezovanje

The helicopter and remote control must be bound (paired) before flight.

  1. Helikopter postavite na ravno, vodoravno površino.
  2. Ensure the remote control's throttle stick is in the lowest position.
  3. Turn on the helicopter's power switch. The helicopter's indicator light will flash.
  4. Press and hold the Power Switch on the remote control until it turns on. The remote control's indicator light will flash.
  5. Wait for a few seconds. The indicator lights on both the helicopter and remote control should become solid, indicating a successful binding.
  6. Če povezovanje ne uspe, izklopite obe napravi in ​​ponovite postopek.

Navodila za uporabo

Always operate the helicopter in an open, safe area, away from people, animals, and obstacles. Ensure you have sufficient space for flight.

Osnovne kontrole letenja

  • Ročica za plin (leva palica gor/dol): Increases or decreases the main rotor speed, controlling ascent and descent.
  • Krmilo (leva palica levo/desno): Controls the helicopter's rotation around its vertical axis (yaw).
  • Višilnik (desna palica gor/dol): Controls forward and backward movement (pitch).
  • Krilca (desna palica levo/desno): Nadzira gibanje z ene strani na drugo (kotaljenje).

Vzlet in pristanek

  1. Vzlet: Slowly push the throttle stick up. The helicopter will gain altitude. Maintain a steady throttle to achieve a stable hover.
  2. Pristanek: Slowly pull the throttle stick down. The helicopter will descend. Reduce throttle completely upon landing.

Altitude Hold and Hover

The 150 EC is equipped with a 6-axis gyroscope and atmospheric pressure sensor for stable flight and altitude hold. Once the helicopter reaches a desired altitude, release the throttle stick to its center position. The helicopter will attempt to maintain its current height.

Flight Modes (Hi/Lo)

The remote control features a Mode Switch. It is recommended to use the "Hi" mode for more stable and responsive flight. The "Lo" mode may exhibit a slight delay in controller response.

One-Button Shutdown

In an emergency or if the helicopter is out of control, use the Throttle Cut Switch to immediately stop the motors. This function can also be used for a quick, controlled shutdown after landing.

Vzdrževanje

Čiščenje

Wipe the helicopter and remote control with a soft, dry cloth after each use. Avoid using water or chemical cleaners, as they can damage electronic components.

Zamenjava rezila

If main or tail blades become damaged, replace them with the provided spares using the included screwdriver. Ensure blades are securely fastened but not overtightened.

Four circular close-up images showing details of the helicopter: battery compartment, main rotor attachment, tail rotor, and canopy removal.

Slika: Podrobna views of helicopter components, including rotor attachment points.

Skrb za baterijo

  • Vedno uporabljajte originalni polnilnik.
  • Baterije ne polnite ali preveč izpraznite.
  • Baterije shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in vročine.
  • If the battery swells or shows signs of damage, discontinue use immediately and dispose of it properly.

Odpravljanje težav

TežavaMožen vzrokrešitev
Helikopter se ne odziva na daljinsko upravljanje.Not bound, low battery (helicopter or remote), power off.Ensure both devices are powered on. Re-bind the helicopter and remote control. Charge helicopter battery. Replace remote control batteries.
Helikopter med lebdenjem zdrsne v zrak.Uneven trim settings, slight wind, unbalanced blades.Adjust trim controls on the remote control. Operate in a calm environment. Check blades for damage and replace if necessary.
Helikopter ne vzleti.Low helicopter battery, damaged blades, throttle not advanced enough.Charge helicopter battery. Check and replace damaged blades. Slowly increase throttle.
Kratek čas letenja.Baterija ni popolnoma napolnjena, stara se.Prepričajte se, da je baterija popolnoma napolnjena. Razmislite o zamenjavi baterije, če je stara ali poškodovana.

Specifikacije

  • Številka modela: 150 ES
  • Proizvajalec: ESKY
  • Nadzorni sistem: 6-osni žiroskop
  • Lastnosti: Height Hold, Hover, One-button Shutdown
  • Helikopterska baterija: 1S 3.7V 150mAh Li-Po (included)
  • Daljinski upravljalnik: MINI 6X 6-Channel 2.4GHz Transmitter
  • Priporočena starost: 14 leta in več
  • Teža artikla: Približno 1.05 funtov (vključno z embalažo)
  • Dimenzije paketa: 8.3 x 7.1 x 3.8 palcev
Diagram showing the dimensions of the ESKY 150 EC helicopter: 186mm length, 44mm width, 59mm height.

Image: ESKY 150 EC Helicopter dimensions.

Varnostne smernice

Please read and adhere to these safety guidelines to prevent injury or damage.

  • Helikopter vedno upravljajte na odprtem območju, stran od ljudi, hišnih ljubljenčkov in ovir.
  • Ne letite v bližini daljnovodov, cest ali vodnih teles.
  • Prste in ohlapna oblačila držite stran od vrtečih se rezil.
  • Never fly in strong winds or adverse weather conditions.
  • Za uporabnike, mlajše od 14 let, je priporočljiv nadzor odrasle osebe.
  • Do not attempt to modify the helicopter or its components.
  • Izklopite helikopter in daljinski upravljalnik, ko ju ne uporabljate.

Garancija in podpora

Information regarding product warranty and customer support contact details is not available in the provided product data. Please refer to the product packaging or the seller's webza posebne garancijske pogoje in možnosti podpore.

Uradni videoposnetki izdelkov

V podatkih o izdelku niso bili navedeni nobeni uradni videoposnetki izdelka prodajalca.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.