1. Uvod
This manual provides essential information for the safe and efficient use of your DATOU BOSS LiFePO4 Battery 12V 100Ah. Please read this manual thoroughly before installation and operation. Retain this manual for future reference.
Image 1.1: DATOU BOSS 12V 100Ah LiFePO4 Battery. This image shows the overall appearance of the battery unit.
2. Varnostne informacije
Always observe the following safety precautions to prevent injury or damage to the battery and connected equipment.
- Ne povzročajte kratkega stika med pozitivnim in negativnim priključkom.
- Ne spreminjajte ali razstavljajte baterije.
- Avoid exposing the battery to fire or water.
- Med polnjenjem in praznjenjem zagotovite ustrezno prezračevanje.
- Use only chargers compatible with LiFePO4 batteries.
- Do not connect batteries with different chemistries or voltages.
- Hraniti izven dosega otrok.
Image 2.1: Battery Management System (BMS) Protection. This diagram illustrates the built-in protections against over-charge, over-discharge, short circuit, overload, and overheating.
The integrated Battery Management System (BMS) provides protection against over-charge, over-discharge, over-current, short circuit, and over-temperature conditions, enhancing safety during use.
3. Izdelek je končanview in funkcije
The DATOU BOSS 12V 100Ah LiFePO4 battery is designed for various applications, offering high performance and durability.
3.1 Ključne lastnosti
- High Cycle Life: Offers 8000+ deep cycles, providing a long operational lifespan.
- Lahek dizajn: Approximately 1/3 the weight of comparable lead-acid batteries, featuring a non-metallic belt handle for easy portability.
- Integriran sistem za upravljanje stavbnega pohištva (BMS): Built-in 120A Battery Management System protects against common electrical faults.
- Široka delovna temperatura: Designed for charging temperatures from -20°C to 55°C and discharging temperatures from 0°C to 60°C.
- Vodoodporen IP65: Provides protection against dust and water ingress.
Image 3.1: Battery Specifications and Dimensions. This image details the battery's capacity (12.8V 100Ah, 1280Wh), maximum charging current (50A), maximum discharge current (120A), and physical dimensions (33cm x 17cm x 21cm).
3.2 Capacity Expansion
The battery supports both series and parallel connections, allowing for system expansion up to a maximum of 4S4P (51.2V 400Ah) to achieve higher voltage and capacity configurations.
Image 3.2: Expandable Capacity. This illustration demonstrates how multiple batteries can be connected in series and parallel to create a larger battery system, such as a 4S4P 51.2V 400Ah system with 20.48kW output power.
3.3 Napredtages Over Lead-Acid Batteries
LiFePO4 batteries offer significant advantages compared to traditional lead-acid batteries, including longer lifespan, lighter weight, and higher depth of discharge.
Image 3.3: Comparison with Lead-Acid Batteries. This image highlights the differences in weight, size, lifespan, and cycle times between LiFePO4 and lead-acid batteries.
3.4 Tipične aplikacije
This LiFePO4 battery is suitable for a wide range of applications, including:
- Electric Vehicles and Recreational Vehicles (RVs)
- Domači sistemi za shranjevanje energije
- Golf Carts and Boathouses
- Trolling Motors and E-Scooters
- Lighting and Fish Finders
- UPS Backup Power Supply
- Home Solar Equipment
Image 3.4: Diverse Applications. This image displays various scenarios where the battery can be used, such as solar-powered homes, RVs, boats, and general energy storage.
3.5 Power Output Examples
The battery can power various appliances for extended periods, making it suitable for off-grid and portable power needs.
Image 3.5: Appliance Run Times. This image provides examples of how long the battery can power common household appliances, such as a blender (500W for 7.6 hours) or a microwave (1000W for 3.8 hours).
4. Nastavitev in namestitev
4.1 Začetni pregled
Upon receiving the battery, inspect it for any visible damage. If damage is found, contact your supplier immediately.
4.2 Smernice za povezavo
- Prepričajte se, da so vse povezave varne in ustrezno izolirane.
- Connect positive terminals to positive and negative to negative.
- For series or parallel connections, ensure all batteries are of the same type, capacity, and state of charge before connecting.
- Use appropriate gauge cables for your application to prevent overheating.
Image 4.1: Solar Panel Connection. This diagram illustrates a typical setup involving a solar panel, MPPT controller, and the LiFePO4 battery for charging.
4.3 Montaža
Mount the battery in a stable, well-ventilated area, away from direct sunlight, heat sources, and flammable materials. Ensure the battery is secured to prevent movement.
5. Navodila za uporabo
5.1 Polnjenje
- Use a dedicated LiFePO4 battery charger with appropriate voltage in trenutne nastavitve.
- Priporočena voltage: 14.4 V - 14.6 V.
- Maximum charging current: 50A.
- Charging temperature range: -20°C to 55°C.
- Avoid charging below 0°C without a low-temperature charging function, as this can damage the battery.
5.2 Praznjenje
- Maximum continuous discharge current: 120A.
- Discharging temperature range: 0°C to 60°C.
- The BMS will automatically cut off power if the discharge current or temperature exceeds safe limits.
6. Vzdrževanje
- Redno polnjenje: If the battery is not in regular use, it is recommended to charge it every three months to prolong its lifespan.
- Pregled terminala: Občasno preverjajte, ali so priključki akumulatorja korodirani ali ali so zrahljani. Po potrebi jih očistite.
- Shranjevanje: Store the battery in a cool, dry place, ideally at a state of charge between 50% and 80%. Avoid extreme temperatures.
- Čiščenje: Očistite baterijo casins suho krpo. Ne uporabljajte topil ali abrazivnih čistil.
7. Odpravljanje težav
If you encounter issues with your battery, refer to the following common problems and solutions. For complex issues, contact customer support.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Baterija se ne polni | Charger not connected, faulty charger, BMS protection activated (over-discharge) | Check charger connection and functionality. Ensure charger is compatible. If BMS is active, try a low-current charge to reactivate. |
| Brez izhodne moči | Loose connections, BMS protection activated (over-discharge, over-current, short circuit), battery fully discharged | Check all cable connections. Charge the battery. If BMS is active, remove load and allow it to reset. |
| Pregrevanje baterije | Excessive load, poor ventilation, high ambient temperature | Reduce load. Ensure adequate ventilation around the battery. Operate within specified temperature ranges. BMS will shut down if temperature is too high. |
8. Specifikacije
| Funkcija | Vrednost |
|---|---|
| Številka modela | DT-12V-100Ah |
| Nominalna zvtage | 12.8 V |
| Nazivna zmogljivost | 100Ah |
| energija | 1280 Wh |
| maks. Stalni polnilni tok | 50A |
| maks. Neprekinjen tok praznjenja | 120A |
| Priporočeno polnjenje Voltage | 14.4 V - 14.6 V |
| Temperaturno območje polnjenja | -20°C do 55°C |
| Temperaturno območje izpusta | 0°C do 60°C |
| Življenjski cikel | 8000+ ciklov (pri 80 % DoD) |
| Dimenzije (D x Š x V) | 32.99 x 16.99 x 21.49 cm |
| Teža | Approximately 1/3 the weight of a comparable lead-acid battery |
| BMS | Vgrajen 120A BMS |
| Ocena vodotesnosti | IP65 |
Note: The specific gram weight provided in some product data appears to be a typographical error for a 100Ah battery. LiFePO4 batteries are significantly lighter than lead-acid equivalents, typically around 1/3 the weight.
9. Garancija in podpora
Za informacije o garanciji, tehnično podporo ali servisne poizvedbe se obrnite na prodajno mesto ali neposredno na proizvajalca. Račun shranite kot dokazilo o nakupu.