ADATA Fusion 1600W Titanium Power Supply Unit User Manual

1. Uvod

This manual provides essential information for the proper installation, operation, and maintenance of your ADATA Fusion 1600W Titanium Power Supply Unit (PSU). Designed for high-performance computing systems, this 80 Plus Titanium certified PSU features ATX 3.0 and PCIe 5.0 compatibility, ensuring stable and efficient power delivery. Please read this manual thoroughly before proceeding with installation or use.

2. Varnostne informacije

• Električna nevarnost: Power supplies contain high voltage components. Do not open the PSU casing. Servisiranje naj izvaja samo usposobljeno osebje.
• Odklop napajanja: Pred nameščanjem, odstranjevanjem ali čiščenjem napajalnika ali drugih komponent računalnika vedno izključite napajalni kabel iz stenske vtičnice.
• Pravilna ozemljitev: Ensure your computer system and the wall outlet are properly grounded to prevent electrical shock.
• Prezračevanje: Do not block the ventilation openings of the PSU. Ensure adequate airflow within your computer case to prevent overheating.
• Vlaga: Napajalnik hranite stran od vode, vlage in drugih tekočin.
• Temperatura: Napajalnik uporabljajte znotraj predpisanega temperaturnega območja. Izogibajte se ekstremni vročini ali mrazu.
• Upravljanje kablov: Route cables carefully to avoid pinching or damage, which can lead to short circuits or fire hazards.

3. Vsebina paketa

Preverite, ali so v paketu vsi elementi:

• ADATA Fusion 1600W Titanium Power Supply Unit
• Modular Cable Set (including Motherboard, CPU, PCIe/GPU, SATA, and Molex cables)
• AC napajalni kabel
• Montažni vijaki
• Uporabniški priročnik (ta dokument)

4. Nastavitev

4.1. Fizična namestitev

1. Ensure your computer is powered off and the AC power cord is disconnected from the wall outlet.
2. Odprite ohišje računalnika.
3. Locate the PSU mounting area, typically at the bottom or top rear of the case.
4. Carefully slide the ADATA Fusion PSU into the designated slot.
5. Secure the PSU to the case using the provided mounting screws.

4.2. Kabelske povezave

The ADATA Fusion 1600W PSU is fully modular, allowing you to connect only the cables required for your system. Refer to the image below for port identification.

This image displays the ADATA Fusion 1600W Titanium Power Supply Unit from an angled top-down perspective. The modular cable connection panel is visible on the left side, labeled for SATA & Molex, Prime Port - Motherboard, CPU & VGA, and 12VHPWR. The top features a fan grill with a geometric pattern, revealing the cooling fan beneath. The side of the unit shows the 'FUSION' branding.

1. Motherboard Power: 24-pinski ATX kabel iz napajalnika priključite na ustrezen priključek na matični plošči.
2. Moč procesorja: Connect the 4+4-pin or 8-pin EPS/CPU cable(s) from the PSU to the CPU power connector(s) on your motherboard.
3. PCIe/GPU Power: Connect the appropriate 6+2-pin or 12VHPWR PCIe 5.0 cables from the PSU to your graphics card(s). Ensure all required power connectors on your GPU are utilized.
4. SATA/Molex Power: Connect SATA power cables to your storage drives (HDDs, SSDs) and optical drives. Use Molex cables for other peripherals as needed.
5. Periferne povezave: Connect any other necessary cables for case fans, RGB controllers, or other components.
6. AC napajanje: Once all internal connections are made, connect the AC power cord to the PSU and then to a grounded wall outlet.

5. Delovanje

After completing the installation and cable connections:

1. Prepričajte se, da je stikalo za vklop na zadnji strani napajalnika v položaju »VKLOP«.
2. Power on your computer system.
3. The ADATA Fusion PSU is designed for efficient and stable operation. Its 80 Plus Titanium certification indicates high power efficiency, reducing heat generation and energy consumption.
4. This PSU supports Prime Ecosystem Management Software. Refer to the ADATA website for software download and instructions on monitoring and controlling PSU performance, fan speeds, and other features.

6. Vzdrževanje

• Čiščenje: Periodically clean the exterior of the PSU and the fan grill to prevent dust buildup. Use compressed air to gently remove dust from the fan and internal components (ensure the PSU is powered off and unplugged).
• Pregled kabla: Redno preverjajte vse kabelske povezave, da zagotovite, da so varni in nepoškodovani.
• Okoljski pogoji: Maintain a clean, dry, and well-ventilated environment for your computer system to optimize PSU lifespan and performance.

7. Odpravljanje težav

If you encounter issues with your ADATA Fusion PSU, consider the following common troubleshooting steps:

• Brez napajanja:
  • Prepričajte se, da je napajalni kabel varno priključen tako na napajalnik kot na stensko vtičnico.
  • Verify the PSU power switch is in the 'ON' position.
  • Check the wall outlet with another device to confirm it has power.
  • Ensure all modular cables are firmly seated in both the PSU and the respective components.
• Nestabilnost/zrušitve sistema:
  • Confirm that your PSU wattage is sufficient for all installed components.
  • Preverite, ali so kabelske povezave ohlapne.
  • Spremljajte temperaturo sistema, da se prepričate, da se komponente ne pregrevajo.
• Hrup ventilatorja:
  • Ensure the PSU fan is not obstructed by cables or dust.
  • If using Prime Ecosystem Management Software, check fan speed settings.

If problems persist after attempting these steps, contact ADATA customer support for further assistance.

8. Specifikacije

9. Garancija in podpora

ADATA provides a limited warranty for the Fusion 1600W Titanium Power Supply Unit. For detailed warranty terms, conditions, and registration information, please visit the official ADATA webspletno mesto ali glejte garancijski list, ki je priložen izdelku.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact ADATA customer service through their official webspletnega mesta ali kontaktnih podatkov, navedenih na embalaži izdelka.

ADATA Official Webspletno mesto: www.adata.com