UNI-T UT372 Digital Laser Tachometer Instruction Manual

1. Izdelek je končanview

The UNI-T UT372 is a non-contact digital laser tachometer designed for measuring the rotational speed (RPM) and count of objects. It utilizes a laser pointer and reflective tape to provide accurate and stable measurements without physical contact. This device is suitable for various industrial and scientific applications.

Ključne značilnosti:

• 5-digit LCD screen with RPM/count and time dual display.
• Measurement modes: MAX (Maximum), MIN (Minimum), AVG (Average), and Normal.
• Nastavljiv sampling rate (0.5-255 seconds).
• Automatic power-off function (cancelable).
• Selectable laser pointer (on/off).
• Clock and time setting capabilities.
• Funkcija zadrževanja podatkov.
• Low power consumption, allowing for approximately 40 hours of continuous operation.
• Equipped with a USB interface for data transfer (UT372 only).
• Certified with CE and UKCA standards.

Image 1.1: The UNI-T UT372 tachometer displaying its main features and specifications.

2. Varnostne informacije

Pred uporabo naprave preberite in razumite vsa varnostna navodila. Neupoštevanje teh navodil lahko povzroči telesne poškodbe ali škodo na napravi.

• Do not look directly into the laser beam. The laser is a Class 2 laser product.
• Do not attempt to modify or disassemble the device. Repairs should only be performed by qualified personnel.
• Pred uporabo se prepričajte, da je predal za baterije varno zaprt.
• Če naprave ne boste uporabljali dlje časa, odstranite baterije, da preprečite puščanje.
• Keep the device away from water, dust, and extreme temperatures.

3. Vsebina paketa

Carefully unpack the box and check if all items are present and undamaged. If any item is missing or damaged, contact your supplier.

• UNI-T UT372 Digital Laser Tachometer
• Odsevni trak
• USB Interface Cable (for UT372 only)
• PC Software CD (for UT372 only)
• Angleški uporabniški priročnik
• Batteries (1.5V LR6 x 4)

Image 3.1: The UNI-T UT372 tachometer and its standard accessories as packaged.

4. Product Layout and Panel Introduction

Familiarize yourself with the components and controls of your UT372 tachometer.

Slika 4.1: Spredaj in ob strani view of the UT372 tachometer with labeled components.

• Tachometer Light Source: Oddaja laserski žarek za merjenje.
• LCD zaslon: Shows measurement readings, modes, and other indicators.
• HOLD / ON/OFF Button: Press to power on/off the device. Short press to activate/deactivate data hold.
• Gumb MENU: Dostopi do menija za prilagoditve nastavitev.
• R/C (RPM / Counts) Button: Toggles between RPM and Count measurement modes.
• Gumb TUNE: Used for adjusting settings within the menu.
• M/M/A (MAX/MIN/AVG) Button: Cycles through Maximum, Minimum, and Average measurement modes.
• USB Port (UT372 only): For connecting to a computer for data transfer.

5. Namestitev in namestitev baterij

5.1 Namestitev baterije

1. Poiščite pokrov predalčka za baterije na zadnji strani naprave.
2. Pokrov odprite tako, da ga potisnete ali odvijete.
3. Insert four 1.5V LR6 (AA) batteries, ensuring correct polarity (+/-).
4. Trdno zaprite pokrov prostora za baterije.

5.2 Nanos odsevnega traku

For accurate non-contact measurement, apply a piece of reflective tape to the rotating object whose speed or count you wish to measure. Ensure the tape is clean and securely attached.

6. Navodila za uporabo

6.1 Vklop/izklop

Pritisnite HOLD / ON/OFF button to turn the tachometer on or off.

6.2 RPM Measurement

1. Ensure the device is in RPM measurement mode (indicated on the LCD). If not, press the R/C gumb za preklop.
2. Point the laser beam at the reflective tape on the rotating object.
3. Maintain a measurement distance between 50mm and 200mm (2 to 8 inches) from the target.
4. The RPM reading will be displayed on the LCD.
5. Opomba: If no signal is detected within 7 seconds, the LCD will display "0.0000". If the RPM exceeds 99999, the LCD will display "OL" (Overload).

Image 6.1: Illustrates the correct distance and method for RPM measurement.

6.3 Counts Measurement

1. Pritisnite R/C button to switch to Count measurement mode.
2. Point the laser beam at the reflective tape on the object.
3. The device will count the number of times the laser beam reflects off the tape.

6.4 Mode Selection (MAX/MIN/AVG)

Pritisnite M/M/A button repeatedly to cycle through the following display modes:

• MAX: Displays the maximum measured value.
• MIN: Displays the minimum measured value.
• AVG: Displays the average measured value.
• Normalno: Displays the current real-time measurement.

6.5 Zadrževanje podatkov

During measurement, a short press of the HOLD / ON/OFF button will freeze the current reading on the display. Press it again to release the data hold and resume live measurement.

6.6 SampPrilagoditev hitrosti linga

Sampling rate can be adjusted from 0.5 to 255 seconds. Refer to the detailed user manual for specific steps on how to access and change this setting via the MENI in TUNE gumbi.

6.7 USB Interface (UT372 Only)

The UT372 model features a USB port for connecting to a computer. Use the provided USB cable and PC software CD to transfer measurement data for analysis and logging. Follow the instructions provided with the software for installation and operation.

7. Vzdrževanje

• Čiščenje: Za čiščenje naprave uporabite mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Shranjevanje: Store the tachometer in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
• Odsevni trak: Ensure the reflective tape is clean and free from damage for accurate readings. Replace as needed.

8. Odpravljanje težav

• Naprava se ne vklopi: Preverite namestitev baterij in se prepričajte, da niso izpraznjene. Po potrebi jih zamenjajte.
• "0.0000" displayed during RPM measurement: Ensure the laser is correctly aimed at the reflective tape and the measurement distance is within 50-200mm. Check if the reflective tape is properly applied and clean.
• Prikazano "OL": The measured RPM exceeds the device's maximum range (99999 RPM).
• Netočne meritve: Verify the reflective tape is securely attached and clean. Ensure the target object is stable during measurement. Check for any obstructions in the laser path.
• Indikator prazne baterije: Replace batteries promptly when the low battery icon appears on the display.

9. Specifikacije

Image 9.1: Detailed specifications for the UT370 series tachometers.

10. Garancija in podpora

UNI-T products are designed and manufactured to high quality standards. For warranty information, technical support, or service, please refer to the warranty card included with your product or contact your local UNI-T distributor or customer service center. Please have your product model number (UT372) and purchase date available when contacting support.