AsperX AX260 3000A Jump Starter with Air Compressor User Manual

1. Varnostne informacije

Preberite vsa varnostna opozorila, navodila, ilustracije in specifikacije, ki so priložene temu izdelku. Neupoštevanje vseh spodaj navedenih navodil lahko povzroči električni udar, požar in/ali resne poškodbe.

• Pri delu z baterijami vedno nosite zaščito za oči.
• Do not operate the jump starter if it is damaged.
• Keep the jump starter away from children.
• Izdelka ne izpostavljajte dežju ali mokri.
• Ensure proper polarity connection (red to positive, black to negative) to avoid sparks or damage.
• Do not use the air compressor continuously for extended periods to prevent overheating. Allow it to cool down between uses.
• Napravo hranite na hladnem in suhem mestu, stran od neposredne sončne svetlobe.

2. Vsebina paketa

Preverite, ali so v paketu vsi elementi:

• 1 x AsperX AX260 Jump Starter with Air Compressor
• 1 x Smart Jumper kabel
• 1 x kabel USB-A v USB-C
• 1 x torba za prenašanje
• 1 x cev črpalke
• 3 x zračne šobe
• 1 x uporabniški priročnik

3. Izdelek je končanview

The AsperX AX260 is a versatile device combining a powerful jump starter, an air compressor, a power bank, and an LED flashlight. It features a 3.4-inch LCD display for easy operation and monitoring.

Glavne lastnosti vključujejo:

• 3000A vršni tok: Capable of starting 12V vehicles with up to 10L Gas and 8.0L Diesel engines.
• 150 PSI zračni kompresor: Features tire pressure detection and adjustable inflation modes (PSI, BAR, KPA).
• Advanced Battery Protection System: Over 10 types of safety protections for secure operation.
• 400-Lumen LED Light: Offers constant lighting, flash, and SOS modes.
• Funkcionalnost Power Bank: USB-A output and USB-C input for charging electronic devices.

4. Nastavitev

Before initial use, fully charge the AsperX AX260 jump starter. Use the provided USB-A to USB-C cable to charge the device. The LCD display will indicate the charging status.

5. Navodila za uporabo

5.1. Zagon vozila s pomočjo kablov

The AX260 can jump start 12V vehicles with up to 10L gas or 8.0L diesel engines.

1. Insert the smart jumper cable into the 12V auto start connector port on the AX260 jump starter.
2. Povežite rdeči clamp na pozitivni (+) pol akumulatorja vozila in črni clamp na negativni (-) terminal.
3. Ensure the connections are secure. The LCD display on the jump starter will indicate correct operation. If the car battery voltage is below 0V, press the 'BOOST' button on the jump starter.
4. Start your car engine immediately.
5. Once the engine starts, remove the jumper cables from the vehicle battery, then from the jump starter.

5.2. Uporaba zračnega kompresorja

The AX260's air compressor supports 3 optional units (PSI, BAR, KPA) and features automatic inflation stop.

1. Connect the pump tube to the air inflation opening on the AX260.
2. Attach the appropriate air nozzle to the pump tube and secure it to the item you wish to inflate (e.g., tire valve).
3. Press the 'M' button to select the desired inflation mode (car, motorcycle, bicycle, ball).
4. Za nastavitev ciljnega tlaka uporabite gumba '+' in '-'.
5. Long press the 'OK' button to start inflation. The device will automatically stop once the set pressure is reached.

5.3. Funkcionalnost prenosne baterije

The AX260 can charge various electronic devices via its USB ports.

• Connect your device's charging cable to the USB-A output port on the AX260.
• Naprava se bo začela samodejno polniti.

5.4. LED svetilka

The 400-lumen LED light offers multiple modes for different situations.

• Pritisnite lamp switch button to cycle through the modes: constant lighting, flash, and SOS.
• Držite lamp switch button to turn off the light.

6. Vzdrževanje

• Zaganjalnik polnite vsake 3–6 mesecev, tudi če ga ne uporabljate, da ohranite zdravje baterije.
• Napravo očistite s suho, mehko krpo. Ne uporabljajte agresivnih kemikalij ali abrazivnih materialov.
• Hraniti na hladnem in suhem mestu. Izogibajte se ekstremnim temperaturam.

7. Odpravljanje težav

• Naprava se ne vklopi: Ensure the device is charged. If fully charged and still not turning on, contact customer support.
• Vozilo se ne zažene: Check that the jumper cables are correctly connected to the battery terminals. Ensure the jump starter has sufficient charge. If the battery is deeply discharged (below 0V), use the 'BOOST' function.
• Zračni kompresor se ne napihuje: Verify the pump tube and air nozzle are securely attached. Check that the desired pressure is set and the 'OK' button is long-pressed to start. Ensure the device has sufficient charge.
• Air compressor overheating: If the air compressor becomes hot during use, allow it to cool down for several minutes before resuming operation. Continuous use for very long periods can cause overheating.
• Incorrect tire pressure reading: Ensure the air nozzle is properly sealed to the tire valve.

8. Specifikacije

9. Uradni videoposnetki izdelkov

The following videos provide additional information and demonstrations of the AsperX AX260 Jump Starter with Air Compressor:

10. Garancija in podpora

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official AsperX webmesto. Shranite račun za garancijske zahtevke.