JESIMAIK Mini Hat Press User Manual

1. Izdelek je končanview

The JESIMAIK Mini Hat Press is a compact and efficient heat press machine designed for customizing various items, primarily hats, but also suitable for small bags, socks, and shirts. It features a curved heating plate for even heat distribution, precise digital temperature and timer controls, and safety features like auto shut-off. Its portable design makes it ideal for both personal crafting and small business use.

Figure 1.1: JESIMAIK Mini Hat Press with included heat-resistant glove and pad, and the main controller.

2. Kaj je v škatli

• 1 x Hat Press Machine
• 1 x Press Base (Silicone Pad)
• 1 x Main Controller with LCD Digital Display
• 1 x napajalni kabel
• 1 x Heat Resistant Pad
• 1 x toplotno odporne rokavice
• 1 x uporabniški priročnik

Figure 2.1: All components included in the JESIMAIK Mini Hat Press package.

3. Nastavitev

1. Odpakirajte vse komponente iz škatle.
2. Place the Hat Press Machine and Main Controller on a stable, heat-resistant surface.
3. Connect the power cord from the main controller to a standard electrical outlet.
4. Connect the flexible cable from the main controller to the Hat Press Machine.
5. Ensure the heat-resistant pad is placed beneath the Hat Press Machine during operation to protect surfaces.

Figure 3.1: Powering on the main controller and setting initial parameters.

4. Navodila za uporabo

4.1 Nastavitev temperature in časovnika

1. Turn on the power switch on the main controller. The LCD screen will illuminate.
2. Pritisnite NASTAVI button once to enter temperature setting mode. The PV (Process Value) will show the current temperature, and SV (Set Value) will flash.
3. Uporabite UP in DOL arrow buttons to adjust the desired temperature (range: 32-400°F).
4. Pritisnite NASTAVI button again to enter timer setting mode. The SV will flash in seconds.
5. Uporabite UP in DOL arrow buttons to adjust the desired countdown time (range: 0-401 seconds).
6. Dolgo pritisnite NASTAVI button for 3 seconds to save the settings and exit setting state. The machine will begin heating to the set temperature.
7. The machine features a memory mode that automatically saves the last used temperature and time settings for convenience.

4.2 Pressing Process

1. Once the machine reaches the set temperature, it will beep to indicate readiness.
2. Place the item (e.g., hat) onto the silicone press base, ensuring it fits snugly and is positioned correctly for your design.
3. Position your design (sublimation, HTV, infusible ink, DTF, glue-backed embroidery, or leather material) onto the item. Use heat transfer tape if necessary to secure the design.
4. Place a piece of silicone paper or parchment paper over the design to protect it and the heating plate.
5. Carefully lower the curved heating plate of the Hat Press Machine onto the design, applying firm, even pressure.
6. Pritisnite ENTER button on the main controller to start the countdown timer.
7. Hold the press firmly until the timer completes and the machine beeps again.
8. Carefully lift the Hat Press Machine and remove the protective paper. Allow the item to cool before peeling off the design backing (refer to your specific material's instructions for hot or cold peel).

Slika 4.1: Npramples of hats successfully customized using the JESIMAIK Mini Hat Press.

5. Varnost in vzdrževanje

5.1 Varnostne funkcije

• Samodejni izklop: The machine will automatically shut off after 10 minutes of no operation to prevent overheating and conserve energy.
• Zaščita pred pregrevanjem: The machine will alert you if it overheats to 482°F (250°C), effectively preventing potential hazards.
• Always use the provided heat-resistant glove when handling the hot heating plate.
• Always place the heated curved heating plate on the heat-resistant pad when not actively pressing to avoid burning other surfaces.
• Unplug the power cord when the machine is not in use or before cleaning.

5.2 Čiščenje in nega

• Pred čiščenjem se prepričajte, da je naprava izklopljena iz električnega omrežja in popolnoma ohlajena.
• Wipe the heating plate and exterior surfaces with a soft, damp krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Store the machine in a dry, cool place, away from direct sunlight and moisture. Its compact design allows for easy storage.

6. Odpravljanje težav

7. Specifikacije

8. Garancija in podpora

For detailed warranty information and customer support, please refer to the official user manual provided with your product or contact JESIMAIK customer service.

Elektronsko različico uporabniškega priročnika najdete tukaj.