WOLTU BH372sz-2 Bar Stool Set - Black Velvet Instruction Manual

1. Izdelek je končanview

This manual provides instructions for the assembly, use, and maintenance of your WOLTU BH372sz-2 Bar Stool Set. These bar stools are designed for comfort and stability, featuring a soft velvet seat, backrest, footrest, and armrests, supported by a robust metal frame.

Image: Two black velvet bar stools positioned at a kitchen island, showcasing their design and intended use.

2. Varnostne informacije

Pred sestavljanjem in uporabo natančno preberite vsa varnostna opozorila in navodila. Neupoštevanje teh navodil lahko povzroči telesne poškodbe ali škodo na izdelku.

• Omejitev teže: Do not exceed the maximum weight capacity of 120 kg (approximately 264 lbs) per stool.
• Stabilna površina: Always use the bar stools on a flat, stable, and level surface to prevent tipping.
• Montaža: Pred uporabo se prepričajte, da so vsi vijaki in pritrdilni elementi varno priviti. Občasno preverite in po potrebi ponovno privijte.
• otroci: Keep children away from the assembly area. Do not allow children to climb or play on the stools.
• Gibanje: Do not drag the stools across the floor. Lift them to move to prevent damage to the floor and the stool legs.

3. Vsebina paketa

Pred začetkom montaže preverite, ali so vsi deli prisotni in nepoškodovani. Če kateri koli deli manjkajo ali so poškodovani, se obrnite na službo za stranke WOLTU.

• Velvet Seat with Backrest and Armrests (2 units)
• Metal Leg Frame (2 units)
• Footrest Bars (4 units)
• Montažni material (vijaki, podložke, imbus ključ)
• Navodila za uporabo (ta dokument)

Image: A detailed diagram illustrating the dimensions of the bar stool, including seat height, overall height, and base width.

4. Navodila za montažo

Assembly is required for this product. It is recommended to assemble the stools on a soft, clean surface to prevent scratches. Two people may be helpful for certain steps.

1. Razpakirajte komponente: Previdno vzemite vse dele iz embalaže in jih položite na čisto, mehko površino. Preverite vsebino embalaže.
2. Pritrditev sedeža na okvir: Align the seat (A) with the top of the metal leg frame (B). Secure the seat to the frame using the provided screws and washers. Do not fully tighten the screws yet.
3. Namestitev opornikov za noge: Insert the footrest bars (C) into the designated slots on the metal leg frame. Ensure they are properly seated.
4. Privijte vse vijake: Once all components are loosely assembled, place the stool upright on a level surface. Apply gentle pressure to the seat to ensure it is stable, then progressively tighten all screws using the Allen key until they are secure. Do not overtighten.
5. Preverite stabilnost: After tightening, gently rock the stool to ensure it is stable and does not wobble. If it wobbles, loosen the screws slightly, adjust, and re-tighten.

Image: An exploded diagram showing the individual components of the bar stool and the sequence of assembly steps.

Slika: Bližnji posnetek view of the bottom of a metal leg, highlighting the anti-slip and anti-scratch pad designed to protect flooring.

5. Uporaba in delovanje

The WOLTU bar stools are designed for comfortable seating at kitchen islands, bars, or high tables.

• sedeži: Za optimalno ravnotežje in udobje sedite na sredini sedeža.
• Naslon za noge: Utilize the integrated footrest to support your feet and enhance comfort, reducing pressure on your legs.
• Gibanje: When moving the stool, always lift it slightly off the ground to prevent scratching floors and damaging the leg pads.

Slika: Stranski profesionalecfile of the bar stool, illustrating its ergonomic design with a supportive backrest and armrests for comfortable seating.

Image: A close-up of the velvet seat, with a hand pressing into the cushion to demonstrate its softness and comfort.

6. Nega in vzdrževanje

Proper care will extend the life and appearance of your WOLTU bar stools.

• Čiščenje žameta: For general cleaning, gently vacuum the velvet fabric using an upholstery attachment. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, use a mild fabric cleaner specifically designed for velvet, testing on an inconspicuous area first.
• Čiščenje kovinskega okvirja: Kovinske noge obrišite z mehko krpoamp krpo. Izogibajte se abrazivnim čistilom ali močnim kemikalijam, ki bi lahko poškodovale površino.
• Redni pregledi: Občasno preverite vse vijake in povezave, da se prepričate, da so trdno pritrjeni. Po potrebi jih ponovno privijte, da ohranite stabilnost.
• Izogibajte se neposredni sončni svetlobi: Prolonged exposure to direct sunlight can cause fading of the velvet fabric. Position stools away from direct sunlight when possible.

7. Odpravljanje težav

Če imate kakršne koli težave z barskimi stoli, si oglejte naslednje pogoste rešitve:

• Zmajanje blata: Ensure the stool is on a flat surface. Check all assembly screws and tighten them evenly. Loosen slightly, press down on the seat, and re-tighten if necessary.
• Škripajoči zvoki: Squeaking can often be resolved by re-tightening all assembly screws. If the issue persists, disassemble and reassemble, ensuring all parts are correctly aligned.
• Težava pri sestavljanju: Review the assembly instructions carefully. Ensure you are using the correct hardware for each step. Do not force parts together. If a part seems ill-fitting, double-check its orientation.

Če ti koraki ne odpravijo težave, se za dodatno pomoč obrnite na podporo strankam WOLTU.

8. Specifikacije izdelka

9. Garancija in podpora strankam

WOLTU products are designed for quality and durability. For information regarding warranty coverage, please refer to the purchase documentation or contact WOLTU customer service directly.

If you require assistance with assembly, missing parts, or have any questions about your product, please contact:

WOLTU GmbH Customer Service
Webspletno mesto: Trgovina WOLTU na Amazonu
Please have your model number (BH372sz-2) and purchase date available when contacting support.