BAFANG BBS01B 36V 500W Ebike Conversion Kit User Manual

1. Izdelek je končanview

This manual provides instructions for the BAFANG BBS01B 36V 500W Ebike Conversion Kit. This kit is designed to transform a standard bicycle into an electric bicycle, offering pedal assist and throttle modes for enhanced riding experience. It includes a powerful central motor, a 3.5-inch C18 display, and a 36V 19.2Ah battery.

Slika 1.1: Konecview of the BAFANG BBS01B Ebike Conversion Kit components.

Motorne lastnosti

• Vrsta motorja: Central Motor (Mid-Drive)
• Nazivna moč: 36V 500W
• Največji navor: 100NM
• Največja hitrost: 25 KM/H (approximately 15.5 MPH)
• Načini: Pure Throttle Mode, Pedal Assist Mode, Walk Assist Mode, Manual Mode

Image 1.2: BAFANG 36V 500W Mid-Drive Motor highlighting its key specifications and operating modes.

Funkcije zaslona

• Model: Bafang C18 Display
• Velikost: 3.5 palcev
• Stopnje pomoči: 9 levels of pedal assist
• Lastnosti: Auto backlight, speed, battery level, trip distance, time.

Image 1.3: The BAFANG C18 display unit, showing current speed, battery charge, and pedal assist level.

2. Kaj je v škatli

The BAFANG BBS01B Ebike Conversion Kit includes the following components:

• BAFANG BBS01B 36V 500W Central Motor
• 3.5" Bafang C18 Display
• 36V 19.2Ah Battery with Bracket
• Polnilec baterij
• Senzor hitrosti
• Plin
• Gonilke
• 46T Chainring & Guard
• Brake Levers (e-Brakes)
• Kabel 1T4
• Zaklepne matice
• Sprednji Lamp
• viličasti ključ
• Rokavice
• Kabelske vezice
• Crank Removal Tools
• Uporabniški priročnik (ta dokument)

Image 2.1: All parts and accessories included in the BAFANG BBS01B Ebike Conversion Kit.

3. Zahteve glede združljivosti

Before installation, ensure your bicycle meets the following compatibility criteria:

• Bottom Bracket Diameter: The inner diameter of the bottom bracket must be between 34mm and 36mm.
• Bottom Bracket Width: The width of the bottom bracket must be between 68mm and 73mm.
• Tip zavore: Compatible with V-brake and disc brake systems. Not compatible with backpedal brake systems.
• Vrsta pogona: Suitable only for chain drive bicycles. Not suitable for belt drive bicycles.
• Material okvirja: Je ni priporočljivo to install this conversion kit onto a carbon fiber frame.

Image 3.1: Visual guide for checking bicycle bottom bracket dimensions and compatibility with the motor unit.

4. Vodič za namestitev

This section provides a step-by-step guide for installing your BAFANG BBS01B Ebike Conversion Kit. Refer to the provided video for a visual demonstration.

Koraki namestitve:

1. Remove Chainring, Crank Arms, and Bottom Bracket: Carefully remove the existing chainring, crank arms, and bottom bracket from your bicycle frame.
2. Namestitev verižnika: Attach the new chainring to the BAFANG motor unit using the provided M5 bolts.
3. Install Chain Guard: Secure the chain guard to the chainring using the supplied screws.
4. Slide Motor Assembly: Insert the assembled motor unit into the bicycle's bottom bracket shell.
5. Varen motor: Use the Y-shaped motor mount bracket on the left side to firmly secure the motor to the frame.
6. Install Crank Arms: Attach the new crank arms to the motor's spindle.
7. Namestitev verige: Route the bicycle chain around the new chainring and rear cassette.
8. Povežite kabelski snop: Connect the main wiring harness from the motor assembly.
9. Povežite dodatke: Connect the front lamp, speed sensor, and gear sensor (if applicable) to the main wiring harness. Ensure all connections are secure.
10. Install Brake Levers: Slide the new brake levers onto the handlebar and tighten them securely.
11. Namestitev ročice za plin na palcu: Install the thumb throttle onto the handlebar and tighten.
12. Namestitev zaslona: Mount the C18 display to your handlebars and connect its cable to the main wiring harness.
13. Install Battery Mount: Secure the battery mount to the bicycle frame using the provided hardware.
14. Namestite baterijo: Slide the 36V 19.2Ah battery onto its mount and ensure it locks into place. Connect the battery cable to the main wiring harness.
15. Power On and Check System: After all components are installed and connected, power on the system and verify that the display, motor, and all sensors are functioning correctly.

Shema ožičenja

Image 4.2: Detailed wiring diagram for the BAFANG Mid Drive Kit, illustrating how each component connects to the main harness.

5. Navodila za uporabo

Once installed, operating your BAFANG e-bike conversion kit is straightforward. The C18 display provides control and information for your ride.

C18 Display Functions

• Vklop/izklop: Pritisnite in držite gumb za vklop na zaslonu, da vklopite ali izklopite sistem.
• Stopnje pomoči pri pedalu: Use the '+' and '-' buttons to cycle through 9 levels of pedal assist. Level 0 provides no assist, while Level 9 provides maximum assist.
• Prikaz informacij: The display shows real-time speed, current battery charge, trip distance, total odometer, and riding time.
• Samodejna osvetlitev ozadja: The display features an automatic backlight for visibility in varying light conditions.

Načini vožnje

• Pure Throttle Mode: Engage the thumb throttle to propel the bike without pedaling.
• Način pomoči pri pedalu: The motor provides assistance as you pedal, based on the selected assist level.
• Način pomoči pri hoji: A low-speed assist feature, typically activated by holding a specific button, to help push the bike while walking.
• Ročni način: Ride the bicycle like a traditional bike with no motor assistance.

6. Specifikacije

7. Varnostne informacije

Always prioritize safety when operating your e-bike. Adhere to local traffic laws and wear appropriate safety gear, including a helmet.

• Perform a pre-ride check before each use, ensuring brakes, tires, and all electrical connections are secure and functional.
• Do not operate the e-bike in extreme weather conditions or on unsafe terrain.
• Keep the battery and electrical components dry. Avoid submerging them in water.
• Akumulator polnite v dobro prezračevanem prostoru, stran od vnetljivih materialov.
• Do not modify the motor, battery, or controller. Unauthorized modifications can lead to malfunction and void the warranty.
• Prepričajte se, da so vsi vijaki in pritrdilni elementi priviti v skladu s specifikacijami proizvajalca.

8. Odpravljanje težav

If you encounter issues with your BAFANG Ebike Conversion Kit, consider the following common troubleshooting steps:

• Brez napajanja: Preverite, ali je baterija popolnoma napolnjena in pravilno nameščena. Prepričajte se, da so vse električne povezave varne.
• Motor ne pomaga: Verify that the pedal assist level is not set to 0. Check the speed sensor connection and ensure the magnet is correctly aligned.
• Zaslon ne deluje: Ensure the display cable is securely connected. If the issue persists, try restarting the system by turning it off and on.
• Nenavadni zvoki: Inspect the motor, chainring, and crank arms for any loose parts or obstructions.
• Kode napak: If the display shows an error code, consult the specific BAFANG C18 display manual for detailed explanations and solutions.

For persistent issues, contact BAFANG customer support or a qualified e-bike technician.

9. Vzdrževanje

Redno vzdrževanje zagotavlja dolgo življenjsko dobo in optimalno delovanje vašega kompleta za predelavo električnega kolesa BAFANG.

• Čiščenje: Clean the motor, battery, and display with a damp krpo. Izogibajte se neposrednemu čiščenju električnih komponent z visokotlačno vodo.
• Mazanje: Keep the chain and other moving parts of your bicycle regularly lubricated.
• Vzdrževanje baterije: Store the battery in a cool, dry place. If not used for extended periods, charge it to 50-70% every 1-2 months.
• Pregledi: Periodically check all cables for wear or damage. Ensure all bolts and connections remain tight.
• Strokovna storitev: Consider annual professional servicing to ensure all components are functioning correctly and safely.

10. Garancija in podpora

The BAFANG BBS01B Ebike Conversion Kit comes with a limited warranty. Please refer to the warranty card included with your product for specific terms and conditions, including coverage duration and claim procedures.

For technical support, spare parts, or warranty claims, please contact the seller or BAFANG customer service directly. Provide your model number (eBIKE-KIT-G340-36V-500W-46T-C18-19.2Ah) and proof of purchase for efficient assistance.

Kontaktni podatki: Refer to your purchase documentation or the BAFANG official webza najnovejše kontaktne podatke za podporo.