Hilitand NLQ3-125/4P Dual Power Automatic Transfer Switch User Manual

1. Uvod

The Hilitand NLQ3-125/4P Dual Power Automatic Transfer Switch (ATS) is designed to ensure a continuous power supply by automatically switching between a main power source and a standby power source. This device is crucial for emergency power systems in homes, factories, and other applications where uninterrupted power is essential. It features millisecond-level switching for seamless power transition.

This manual provides detailed instructions for the safe installation, operation, and maintenance of your NLQ3-125/4P ATS.

2. Varnostne informacije

OPOZORILO: Installation and maintenance should only be performed by qualified personnel. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always disconnect all power sources before installing or servicing the ATS.
• Poskrbite za pravilno ozemljitev naprave.
• Verify all wiring connections are secure and correct according to the wiring diagram.
• Do not operate the switch if it appears damaged.
• Upoštevajte vse lokalne in nacionalne električne predpise.

3. Izdelek je končanview

The NLQ3-125/4P ATS is a compact, 4-pole device featuring both automatic and manual operation modes. It is constructed from flame-retardant PC plastic for safety and durability, with silver contacts for improved conductivity and extended service life.

Slika 3.1: Spredaj view of the NLQ3-125/4P ATS, showing the main power (Source A) and generator (Source B) inputs, output terminals, and the manual/auto selector switch.

Slika 3.2: Pod kotom view of the ATS, highlighting the robust terminal blocks for secure wiring connections.

Ključne komponente:

• Source A (Normal Power) Terminals: For connecting the primary power supply.
• Source B (Generator) Terminals: For connecting the standby power supply.
• Izhodni priključki: For connecting to the load.
• Manual/Auto Selector Switch: Allows selection between automatic and manual operation modes.
• Indikatorske lučke: To show the active power source (A or B).
• Nadzorni terminali: For external control signals (AR, AN, NC, C1, OFF, BR, BN, NC, C1, OFF).

4. Specifikacije

Figure 4.1: Approximate dimensions of the NLQ3-125/4P ATS for installation planning.

5. Namestitev in nastavitev

The NLQ3-125/4P ATS is designed for track installation and is compatible with PZ30 power distribution boxes. Before proceeding with installation, ensure all power is disconnected at the main breaker.

Koraki namestitve:

1. Pregled: Before installation, carefully inspect the ATS for any signs of damage. Use the operating handle to manually switch it on and off to check the flexibility of the transmission mechanism. Verify the generation and disconnection conditions of the load at each stage for both normal and standby power supplies.
2. Montaža: Mount the ATS securely onto a DIN rail within your PZ30 power distribution box or suitable enclosure.
3. Wiring Main Power (Source A): Connect the main power supply (Normal Power) to the terminals labeled 'Source A'. Ensure correct phase (R, S, T) and neutral (N) connections for 4-pole systems.
4. Wiring Standby Power (Source B): Connect the standby power supply (Generator) to the terminals labeled 'Source B'. Ensure correct phase (R, S, T) and neutral (N) connections.
5. Obremenitev ožičenja: Connect the load (your electrical system) to the output terminals of the ATS.
6. Krmilna napeljava: Connect any necessary external control signals to the AR, AN, NC, C1, OFF (for Source A) and BR, BN, NC, C1, OFF (for Source B) terminals as per your system requirements.
7. Preverjanje: Double-check all wiring for correctness and tightness. Ensure no loose connections are present.

Slika 5.1: Nprample wiring diagram for the NLQ3-125/4P ATS. Consult a qualified electrician for specific installation needs.

Okoljski pogoji:

• Temperatura okolja: Maximum 40°C, minimum -5°C. The average temperature within 24 hours should not exceed 35°C.
• Nadmorska višina: Installation site altitude should not be higher than 2000m.
• Relativna vlažnost: At 40°C, relative humidity should not exceed 50%. At -5°C, higher humidity is permissible (e.g., 90% at 25°C). Special measures may be needed to address occasional condensation due to temperature changes.

6. Navodila za uporabo

The NLQ3-125/4P ATS offers both automatic and manual operation modes.

Samodejni način:

• Set the selector switch to the 'Auto' position.
• In this mode, the ATS will continuously monitor the main power supply (Source A).
• If Source A fails or becomes abnormal, the ATS will automatically switch to the standby power supply (Source B) within milliseconds.
• When Source A is restored and stable, the ATS will automatically switch back to Source A.
• The indicator lights (A or B) will show which power source is currently active.

Ročni način:

• Set the selector switch to the 'Manual' position.
• In manual mode, the user can manually switch between Source A and Source B using the operating handle.
• This mode is typically used for testing, maintenance, or in situations where automatic switching is not desired.
• Opomba: Ensure the manual operation is performed carefully and safely, especially when power is connected.

7. Vzdrževanje

Regular maintenance ensures the longevity and reliable operation of your ATS.

• Periodični pregled: Annually inspect the ATS for any signs of wear, damage, or loose connections.
• Čiščenje: Keep the device clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
• Preverjanje terminala: Periodically check all terminal screws to ensure they are tight and secure.
• Test delovanja: Regularly test the automatic switching function by simulating a main power failure (if safe to do so) to ensure the standby power engages correctly.
• Strokovna storitev: For any complex issues or internal repairs, contact a qualified electrician or service technician.

8. Odpravljanje težav

This section addresses common issues you might encounter with your ATS.

Issue: ATS does not switch automatically.

• Način preverjanja: Ensure the selector switch is set to 'Auto' mode.
• Napajanje: Verify that both main (Source A) and standby (Source B) power supplies are connected and functional.
• Krmilna napeljava: Inspect control wiring for any disconnections or faults.
• Notranja napaka: If all external checks are clear, there might be an internal fault. Contact a qualified technician.

Issue: No power to load.

• Vhodna moč: Check if both Source A and Source B have power.
• Položaj stikala: Ensure the ATS is switched to an active power source (either A or B, indicated by lights).
• Izhodno ožičenje: Inspect the wiring from the ATS output to the load for any breaks or loose connections.
• Preobremenitev/kratki stik: Check for any overload or short circuit conditions in your electrical system that might have tripped protective devices upstream.

Issue: ATS makes unusual noises.

• Razsute komponente: Disconnect power and check for any loose internal components or mounting screws.
• Notranja poškodba: If the noise persists and cannot be identified, it may indicate internal damage. Seek professional assistance.

9. Garancija in podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Hilitand customer service through their official channels. Keep your purchase receipt as proof of purchase.

Proizvajalec: Hilitand

Številka modela: NLQ3-125/4P