Linon AMZN3152

Linon Coco Walnut Twin Over Full Bunk Bed Instruction Manual

Model: AMZN3152

Uvod

This manual provides detailed instructions for the assembly, safe operation, and maintenance of your Linon Coco Walnut Twin Over Full Bunk Bed. Please read all instructions carefully before assembly and use to ensure safety and proper function.

The Linon Coco Walnut Twin Over Full Bunk Bed is designed with a modern aesthetic and can be configured as a twin-over-full bunk bed or separated into two individual beds (one twin, one full). It features a solid wood frame with a walnut finish and meets all ASTM/CPSC national bunk bed safety standards.

Linon Coco Walnut Twin Over Full Bunk Bed assembled

Image: Fully assembled Linon Coco Walnut Twin Over Full Bunk Bed.

Varnostne informacije

Your safety is paramount. Adhere to the following guidelines to prevent injury and ensure the longevity of your bunk bed.

  • Zmogljivost teže: The top bunk supports up to 220 lbs. The bottom bunk supports up to 400 lbs. Do not exceed these limits.
  • Zahteve za vzmetnice:
    • Top Bunk (Twin): Use a mattress measuring 75"W x 38"D and up to 8"H.
    • Bottom Bunk (Full): Use a mattress measuring 75"W x 56"D.

    Note: Mattresses are not included with the bunk bed.

  • Zaščitne ograje: The top bunk is equipped with guardrails. Ensure they are always securely in place. Do not remove or modify them.
  • Varnost lestve: Always use the provided ladder for access to the top bunk. Ensure the ladder is securely attached before use.
  • Priporočilo glede starosti: Zgornje ležišče ni primerno za otroke, mlajše od 6 let.
  • Montaža: Ensure all bolts and connectors are tightened securely during assembly and checked periodically.
  • Prezračevanje: Na noben del pogradne postelje ne pritrjujte ali obešajte predmetov, ki niso namenjeni za uporabo s posteljo, npr.ampnpr., vendar ne omejeno na, kavlje, pasove ali vrvi za skakanje.

Postavitev in montaža

Assembly of the Linon Coco Bunk Bed requires two adults. Please ensure all parts are present before beginning. A Phillips head screwdriver and Allen wrench (often included) are typically required.

Seznam delov:

Refer to the included hardware packet for a complete list of components and fasteners. Do not discard packaging until assembly is complete and all parts are accounted for.

Koraki sestavljanja:

  1. Razpakirajte in identificirajte: Carefully unpack all components and lay them out on a soft, clean surface to prevent scratches. Identify each part using the provided diagram in your hardware packet.
  2. Assemble Lower Bed Frame: Begin by assembling the headboard and footboard for the full-size bed. Attach the side rails using the specified hardware. Ensure all connections are snug but do not overtighten until the frame is fully assembled.
  3. Assembly step showing bed frame components

    Image: Components for bed frame assembly.

  4. Install Slats for Lower Bed: Place the wooden slats across the side rails of the full-size bed. Secure them in place according to the instructions to create a stable mattress foundation.
  5. Close-up of bed slats installation

    Image: Detail of wooden slats being installed on a bed frame.

  6. Assemble Upper Bed Frame: Repeat the process for the twin-size bed frame, assembling its headboard, footboard, and side rails.
  7. Assembly step showing upper bed frame components

    Image: Components for the upper twin bed frame.

  8. Install Slats for Upper Bed: Secure the wooden slats for the twin-size bed.
  9. Close-up of upper bed slats installation

    Image: Detail of wooden slats being installed on the upper bed frame.

  10. Pritrdite zaščitne ograje: Securely attach the guardrails to the upper bunk bed frame using the designated hardware.
  11. Stack Beds and Attach Ladder: Carefully lift the assembled twin bed and place it on top of the full bed, aligning the support posts. Securely fasten the two beds together using the provided connectors. Then, attach the ladder to the designated points on the bunk bed.
  12. Assembled bunk bed with ladder

    Image: The bunk bed fully assembled with the ladder attached.

  13. Končno zategovanje: Once all components are in place and aligned, go back and securely tighten all bolts and screws. Do not overtighten.

Converting to Two Separate Beds:

The Linon Coco Bunk Bed can be separated into a standalone twin bed and a standalone full bed. To convert:

  1. Remove the ladder.
  2. Carefully unfasten the connectors holding the top twin bed to the bottom full bed.
  3. With assistance, gently lift and remove the top twin bed.
  4. Place the twin bed in its desired location. The full bed can remain in place.
Image showing the bunk bed separated into two individual beds

Image: The Linon Coco bed configured as two separate beds, one twin and one full.

Navodila za uporabo

Using your Linon Coco Bunk Bed safely and effectively.

  • Top Bunk Access: Always use the provided ladder to access the top bunk. Do not jump onto or off the top bunk.
  • Spalni položaj: Ensure the mattress on the top bunk is positioned correctly, leaving sufficient space below the top of the guardrails.
  • Splošna uporaba: Avoid rough play on or around the bunk bed. Do not use the bed as a trampoline.

Vzdrževanje

Regular maintenance will help preserve the appearance and structural integrity of your bunk bed.

  • Čiščenje: Površine obrišite z mehko, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or polishes that may damage the walnut finish.
  • Preverjanje strojne opreme: Periodically check all bolts, screws, and connectors to ensure they remain tight. Retighten as necessary to maintain stability.
  • Strukturna celovitost: Inspect the bed frame and slats regularly for any signs of damage, cracks, or wear. Discontinue use if significant damage is found and contact customer support.

Odpravljanje težav

Pogoste težave in njihove rešitve.

  • Škripajoči zvoki:
    • Check all bolts and screws. Tighten any that are loose.
    • Ensure slats are properly seated and secured.
  • Postelja se zdi nestabilna:
    • Verify that all assembly steps have been followed correctly.
    • Ensure all connecting hardware between the upper and lower beds is securely fastened.
    • Confirm the bed is on a level surface.
  • Manjkajoči deli:
    • Ponovno skrbno preverite vse embalažne materiale.
    • Contact Linon customer support with your model number and a description of the missing part.

Specifikacije

Detailed specifications for the Linon Coco Walnut Twin Over Full Bunk Bed.

Diagram showing dimensions of the Linon Coco Bunk Bed

Image: Dimensional diagram of the Linon Coco Walnut Twin Over Full Bunk Bed.

FunkcijaPodrobnost
Številka modelaAMZN3152
ZnamkaLinon
MaterialEngineered Wood, Wood (Solid Pine)
KončajWalnut (UV Varnish)
Skupne mere (D x Š x V)80 cm D x 62.6 cm Š x 71 cm V
Teža predmeta185.21 funta
Priporočena največja teža (skupaj)620 funta
Nosilnost zgornjega ležišča220 funta
Bottom Bunk Weight Capacity400 funta
Compatible Mattress Size (Top)Twin (75"W x 38"D, up to 8"H)
Compatible Mattress Size (Bottom)Full (75"W x 56"D)
Zahtevana montažaja
Posebna funkcijaConverts to Two Separate Beds

Garancija in podpora

For warranty information or assistance with your Linon Coco Walnut Twin Over Full Bunk Bed, please contact Linon customer service. Keep your purchase receipt and model number (AMZN3152) handy for faster service.

Kontaktne podatke običajno najdete na proizvajalčevi strani webspletnem mestu ali prek vašega prodajalca.

© 2023 Linon. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.