Sanus WSWME12

Sanus Speaker Wall Mounts for Sonos Era 100

Model: WSWME12 - Instruction Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Sanus Speaker Wall Mounts (Model WSWME12) designed specifically for Sonos Era 100 speakers. Please read these instructions carefully before beginning installation to ensure proper setup and safe use of the product.

2. Značilnosti izdelka

  • Integrirana zasnova: Engineered to seamlessly complement the Sonos Era 100 speaker's aesthetic.
  • Hitra namestitev: Designed for an easy DIY installation, typically completed within 15 minutes.
  • Nastavljivo pozicioniranje: Offers tool-free tilt adjustment from 7 degrees up to 32 degrees down, and swivel adjustment of 72 degrees left or right for optimal sound direction.
  • Prilagodljive možnosti namestitve: Supports both upright and inverted speaker placement to suit various room layouts and acoustic needs.
  • Varna priloga: Utilizes a bottom threaded insert for safe and secure speaker mounting.

3. Varnostne informacije

Always ensure that the mounting surface can support the weight of the speaker and the mount. Use appropriate hardware for your wall type (e.g., wood stud, concrete, drywall). If you are unsure about the installation process or wall compatibility, consult a qualified professional. Do not exceed the maximum weight capacity of the mount. Keep small parts away from children.

4. Nastavitev in namestitev

Follow these steps for a secure and efficient installation of your Sanus Speaker Wall Mounts:

  1. Pripravite mesto namestitve: Choose a suitable wall location, considering speaker placement for optimal sound and power outlet accessibility. Ensure there are no hidden electrical wires or plumbing in the wall at the drilling location.
  2. Pritrdite stensko ploščo: Secure the wall plate to the desired location using the provided hardware. For wood studs, drill pilot holes and use wood screws. For drywall, use appropriate anchors and screws. Ensure the plate is level before tightening.
  3. Assemble Speaker Bracket: Attach the speaker bracket to the wall plate. Refer to the diagram below for visual guidance on how the bracket connects to the wall mount.
  4. Priključitev zvočnika: Carefully align your Sonos Era 100 speaker with the bracket. The bottom threaded insert on the speaker will secure it to the mount. Ensure the speaker is firmly attached.
  5. Upravljanje kablov: Route the speaker's power cable through the integrated cable management channels on the mount for a clean and organized appearance.
Diagram showing the speaker mounting bracket components.
Figure 4.1: Speaker mounting bracket components.
Image showing a Sonos Era 100 speaker attached to the wall mount.
Figure 4.2: Sonos Era 100 speaker attached to the wall mount.
Image demonstrating cable management with the speaker mount.
Figure 4.3: Integrated cable management for a tidy setup.

5. Navodila za uporabo (prilagoditve)

The Sanus Speaker Wall Mount allows for flexible positioning of your Sonos Era 100 speakers to optimize your audio experience.

  • Nastavitev nagiba: The speaker can be tilted 7 degrees upwards or 32 degrees downwards. Gently push or pull the speaker to achieve the desired vertical angle.
  • Nastavitev vrtenja: The speaker can be swiveled 72 degrees to the left or right. Rotate the speaker horizontally to direct sound as needed.

All adjustments are tool-free, allowing for easy fine-tuning of your speaker's direction.

Diagram illustrating the tilt and swivel range of the speaker mount.
Figure 5.1: Tilt (7° up, 32° down) and Swivel (73° left/right) adjustment ranges.
Image showing a hand adjusting the tilt of a mounted speaker.
Figure 5.2: Effortless tilt adjustment for optimal sound.

6. Vzdrževanje

To maintain the appearance and functionality of your speaker mounts:

  • Nosilec očistite z mehko, suho krpo. Izogibajte se abrazivnim čistilom ali topilom.
  • Občasno preverite vse pritrdilne vijake in povezave, da se prepričate, da so trdno priviti in varno pritrjeni.

7. Odpravljanje težav

If you encounter any issues with your speaker mounts, consider the following:

  • Nosilec se zdi ohlapen: Re-check and tighten all mounting screws on the wall plate and the speaker bracket. Ensure the wall material is appropriate for the chosen hardware.
  • Težavnost prilagajanja: Ensure no cables are obstructing the movement of the mount. Apply gentle, even pressure when adjusting tilt or swivel.
  • Speaker not level: Verify that the wall plate was installed level. Minor adjustments can often be made by slightly loosening and re-tightening the bracket screws.

8. Specifikacije

FunkcijaPodrobnost
Dimenzije izdelka7.36 x 3.94 x 6.29 palcev (18.7 x 10 x 16 cm)
Teža predmeta2.68 funtov (1.22 kg)
Številka modelaWSWME12
Združljive napraveSonos Era 100 Speakers
Vrsta namestitveStenski nosilec
barvaČrna
Razpon nagiba7° Up / 32° Down
Vrtljiv domet72° levo / 72° desno
Diagram showing the dimensions of the speaker mount.
Figure 8.1: Key dimensions of the Sanus WSWME12 mount.

9. Garancija in podpora

Sanus products are designed and engineered in the U.S. with over 30 years of experience in audio-visual mounting solutions. This product comes with a limited warranty. For any questions, installation assistance, or troubleshooting, Sanus offers U.S.-based expert customer care available 7 days a week.

For support, please visit the official Sanus webspletno mesto ali se obrnite neposredno na njihovo službo za stranke.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.