Neumann KH 120 II DSP Powered Studio Monitor User Manual

1. Uvod in konecview

The Neumann KH 120 II DSP Powered Studio Monitor is a compact nearfield monitor designed for professional audio environments. Building upon its predecessor, the KH 120 II features an onboard Digital Signal Processing (DSP) engine, enhanced power, deeper bass response, and higher Sound Pressure Level (SPL) capabilities. This monitor is engineered for precise monitoring accuracy, facilitating linear-phase crossovers and room-adaptive alignment through Neumann's MA 1 Automatic Alignment system. Its robust construction ensures reliable performance over extended periods.

Slika 1: Spredaj view of the Neumann KH 120 II DSP Powered Studio Monitor.

2. Varnostne informacije

Please read and adhere to the following safety guidelines to ensure safe operation and prevent damage to the device or personal injury:

• Napajanje: Monitor priključite samo na električno vtičnico z navedeno glasnostjotage and frequency. Ensure the power cable is not damaged or pinched.
• Prezračevanje: Do not block ventilation openings. Ensure adequate airflow around the monitor to prevent overheating.
• Vlaga: Keep the monitor away from water, rain, and excessive humidity. Do not operate with wet hands.
• Čiščenje: Pred čiščenjem izključite napajanje. Uporabite suho, mehko krpo. Ne uporabljajte tekočih ali aerosolnih čistil.
• Servisiranje: Refer all servicing to qualified service personnel. Do not attempt to open or repair the monitor yourself.
• Umestitev: Place the monitor on a stable surface or stand to prevent it from falling.

3. Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• Neumann KH 120 II DSP Powered Studio Monitor (White)
• Napajalni kabel
• Vodnik za hiter začetek
• Varnostni list

4. Nastavitev

4.1 Namestitev

Optimal placement is crucial for accurate monitoring. Position the monitors to form an equilateral triangle with your listening position. The tweeters should ideally be at ear level. Ensure there are no obstructions between the monitors and your ears. Avoid placing monitors directly against walls or in corners without proper acoustic treatment, as this can affect bass response.

4.2 Povezave

The KH 120 II offers versatile connectivity options:

• XLR vhod: For balanced audio connections from professional audio interfaces or mixing consoles.
• RCA vhod: For unbalanced audio connections from consumer-grade equipment.
• 1/4'' TRS Input: For balanced or unbalanced audio connections from various sources.

Connect your audio source to the desired input on the rear panel of the monitor. Ensure all connections are secure before powering on.

4.3 Napajalni priključek

Connect the provided power cable to the power inlet on the rear of the monitor and then to a suitable electrical outlet.

4.4 DSP and MA 1 Automatic Alignment

The KH 120 II features an onboard DSP for advanced acoustic control. For optimal room correction and alignment, utilize the Neumann MA 1 Automatic Alignment system (sold separately). This system measures your room acoustics and calibrates the monitors for the most accurate sound reproduction.

5. Navodila za uporabo

5.1 Vklop/izklop

Locate the power switch on the rear panel of the monitor. Flip the switch to the 'ON' position to power on the monitor. The Neumann logo on the front will illuminate. To power off, flip the switch to the 'OFF' position.

5.2 Nadzor glasnosti

Adjust the output volume using the volume control knob, typically found on your audio interface or mixing console. The KH 120 II monitors are designed for flat frequency response, so avoid using external EQ unless specifically for room correction or creative mixing purposes.

5.3 DSP Features

The integrated DSP allows for precise control over various acoustic parameters, including EQ settings. These settings can be accessed and adjusted via compatible Neumann software or hardware, enabling fine-tuning for your specific listening environment and preferences.

6. Vzdrževanje

6.1 Čiščenje

To clean the monitor, first disconnect it from the power supply. Use a soft, dry, lint-free cloth to wipe down the exterior surfaces. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish or components. Avoid spraying liquids directly onto the monitor.

6.2 Shranjevanje

When not in use for extended periods, store the monitor in a cool, dry place, away from direct sunlight and extreme temperatures. If possible, use the original packaging for protection during storage or transport.

7. Odpravljanje težav

If you encounter issues with your Neumann KH 120 II monitor, refer to the following common problems and solutions:

• Ni zvoka:
  • Ensure the monitor is powered on and the power cable is securely connected.
  • Check audio cable connections from your source to the monitor.
  • Verify the audio source is active and outputting sound.
  • Confirm volume levels on both the source and the monitor are not set to minimum.
• Popačen zvok:
  • Zmanjšajte vhodno raven zvoka iz avdio vira, da preprečite prekinitev zvoka.
  • Preverite, ali so avdio kabli poškodovani.
  • Ensure the monitor is not placed too close to walls or corners, which can cause bass buildup.
• Brenčanje ali brenčanje:
  • Prepričajte se, da so vsi avdio kabli pravilno zaščiteni in priključeni.
  • Preverite ozemljitvene zanke; poskusite priključiti vso avdio opremo na isti podaljšek.
  • Monitor premaknite stran od drugih elektronskih naprav, ki lahko povzročajo motnje.

If the issue persists after attempting these solutions, please contact Neumann customer support or a qualified service technician.

8. Specifikacije

9. Garancija in podpora

The Neumann KH 120 II DSP Powered Studio Monitor comes with a Omejena garancija. For detailed information regarding warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official Neumann webmesto.

For technical support, service inquiries, or to download the full user manual, please visit the Neumann Store on Amazon or the official Neumann webmesto.