Integy C31589

Integy WP-S16-RTR 25A Waterproof Brushless Electronic Speed Controller Instruction Manual

Model: C31589

1. Uvod

This manual provides essential information for the proper installation, operation, and maintenance of your Integy WP-S16-RTR 25A Waterproof Brushless Electronic Speed Controller (ESC). Designed for 1/16 and 1/18 scale RC cars, this ESC offers reliable performance with 2S or 3S LiPo battery compatibility. Please read this manual thoroughly before use to ensure safe and optimal performance.

2. Varnostna navodila

Adherence to the following safety guidelines is crucial for preventing damage to the ESC, other components, and personal injury.

  • Varnost baterije: Vedno uporabljajte baterije z navedeno prostorninotage range (2-3S LiPo or 6-9 cells NiMH). Incorrect voltage lahko povzroči hudo škodo.
  • Polariteta: Ensure correct battery polarity when connecting. Reverse polarity will damage the ESC.
  • Ocena vodoodpornosti: While this ESC is waterproof, it is not designed for prolonged submersion. Always dry the ESC thoroughly after exposure to moisture to prevent corrosion.
  • Združljivost motorja: Use only with compatible brushless motors as specified in the 'Specifications' section.
  • Prezračevanje: Med delovanjem zagotovite zadosten pretok zraka okoli ESC-ja, da preprečite pregrevanje.
  • Prekinitev povezave: Always disconnect the battery from the ESC when not in use to prevent accidental activation and battery discharge.
  • otroci: This product is not a toy. Keep out of reach of children under 15 years of age. Adult supervision is recommended during operation.

3. Izdelek je končanview

The Integy WP-S16-RTR ESC is a compact and robust electronic speed controller designed for various RC applications. It features a durable casing and integrated wiring for motor, battery, and receiver connections.

Integy WP-S16-RTR 25A Waterproof Brushless ESC with wires and switch

Slika 3.1: Zgoraj view of the Integy WP-S16-RTR 25A Waterproof Brushless ESC, showing the main unit, motor wires (blue, yellow, orange connectors), battery wires (red, black), and receiver wire with power switch.

Ključne komponente vključujejo:

  • ESC Unit: The main control module.
  • Žice motorja: Three wires (typically blue, yellow, orange) for connecting to a brushless motor.
  • Battery Wires: Red (+) and Black (-) wires for connecting to the battery.
  • Receiver Wire (Rx Wire): Connects to the throttle channel of your RC receiver.
  • Stikalo za vklop: Integrated switch for turning the ESC on and off.
  • Built-in BEC: Provides regulated 6V/1A power to the receiver and servos.

4. Nastavitev in namestitev

Follow these steps for proper installation of the ESC into your RC vehicle.

  1. Montaža ESC-ja: Securely mount the ESC in your vehicle using double-sided tape or zip ties, ensuring it is protected from excessive vibration and impact. Allow for adequate ventilation.
  2. Povezava motorja: Connect the three motor wires from the ESC to the corresponding wires on your brushless motor. The order of connection may affect motor rotation direction; if the motor spins in the wrong direction, swap any two of the three motor wires.
  3. Povezava sprejemnika: Plug the receiver wire (Rx Wire) from the ESC into the throttle channel (usually channel 2) of your RC receiver.
  4. Priključek baterije: Connect your battery pack to the battery wires of the ESC, ensuring correct polarity (red to positive, black to negative).
  5. Initial Calibration (Throttle Range):
    • Turn on your transmitter and ensure the throttle trim is at neutral.
    • With the ESC power switch off, connect the battery.
    • Press and hold the ESC's power button (if applicable, or follow specific calibration instructions for your model if different).
    • Turn on the ESC. Release the button when the LED flashes.
    • Move the throttle stick to full throttle and hold. The ESC will beep.
    • Move the throttle stick to full brake/reverse and hold. The ESC will beep again.
    • Return the throttle stick to neutral. The ESC will beep, indicating calibration is complete.

5. Navodila za uporabo

Once installed and calibrated, your ESC is ready for operation.

  • Vklop: Turn on your RC transmitter first, then turn on the ESC using its power switch.
  • Vožnja: Operate your vehicle using the transmitter's throttle and steering controls.
  • Ugasniti: Always turn off the ESC first, then turn off your transmitter. Disconnect the battery immediately after use.
  • Zaščita pred pregrevanjem: The ESC features built-in overheat protection. If the ESC becomes too hot, it may reduce power or shut down temporarily. Allow it to cool before resuming operation.
  • Nizka glasnosttage meja (LVC): For LiPo batteries, the ESC has an LVC feature to prevent over-discharge. When the battery voltage drops below a safe level, the ESC will reduce power or cut off to protect the battery.

6. Vzdrževanje

Regular maintenance ensures the longevity and performance of your ESC.

  • Čiščenje: After each use, especially in dusty or wet conditions, clean the ESC. Use a soft brush or compressed air to remove dirt and debris. For wet conditions, ensure the ESC is completely dry before storage or next use.
  • Pregled: Periodically inspect all wires and connectors for signs of wear, fraying, or corrosion. Replace damaged components immediately.
  • Shranjevanje: ESC shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur. Pred shranjevanjem vedno odklopite baterijo.

7. Odpravljanje težav

Za pogoste težave in njihove možne rešitve glejte ta razdelek.

TežavaMožen vzrokrešitev
Motor ne deluje ali deluje občasno.
  • Baterija ni priključena ali je nizkatage.
  • Loose motor or receiver connections.
  • Incorrect throttle calibration.
  • Motor or ESC damage.
  • Preverite priklop baterije in raven napolnjenosti.
  • Preverite, ali so vse povezave varne.
  • Perform throttle calibration (Section 4).
  • Inspect motor and ESC for visible damage.
Motor teče v napačno smer.Incorrect motor wire connection order.Swap any two of the three motor wires between the ESC and motor.
ESC se pregreva.
  • Nezadostno prezračevanje.
  • Motor gearing too high.
  • Motor limit exceeded.
  • Ensure proper airflow around the ESC.
  • Reduce motor pinion size or increase spur gear size.
  • Verify motor compatibility with ESC specifications.
Vehicle stops or loses power suddenly.
  • Nizka glasnosttage Cutoff (LVC) activated.
  • Aktivirana zaščita pred pregrevanjem.
  • Ponovno napolnite ali zamenjajte baterijo.
  • Allow ESC to cool down.

8. Specifikacije

Detailed technical specifications for the Integy WP-S16-RTR 25A Waterproof Brushless ESC.

  • Trajni tok: 25A
  • Izbruhni tok: 90A
  • Odpornost: 0.005 Ohm
  • Car Applicable: 1/16, 1/18 Scale RC Cars
  • Motor Limit (2S LiPo / 6 cells NiMH):
    • On-road: ≥12T
    • Off-road: ≥18T
    • Motor Size: 2040 Size Motor
  • Motor Limit (3S LiPo / 9 cells NiMH):
    • On-road: ≥18T
    • Off-road: ≥24T
    • Motor Size: 2040 Size Motor
  • Built-in BEC: 6V/1A (preklopni način)
  • Program Port: Rx Wire
  • Dimenzije: 36 mm x 28 mm x 21 mm
  • Neto teža: 38 g
  • Številka modela artikla: C31589

9. Garancija in podpora

For warranty information, technical support, or replacement parts, please visit the official Integy webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Shranite račun kot dokazilo o nakupu.

Official Integy Webspletno mesto: www.integy.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.