Intelbras GX 3000 Wireless Mesh Router User Manual

1. Uvod

The Intelbras GX 3000 is a multifunction wireless mesh router designed to provide high-speed internet connectivity via 5G/4G networks and Wi-Fi 6. This device integrates advanced Qualcomm technology for both its 5G modem and Wi-Fi 6 solution, ensuring high performance and reliability. It supports up to 128 devices simultaneously on the Wi-Fi network and offers wired connectivity options. The GX 3000 is suitable for various environments, from home to office, providing robust network performance.

This manual provides instructions for setting up, operating, and maintaining your Intelbras GX 3000 router. Please read it carefully before use.

2. Package Contents & Device Overview

2.1. Vsebina paketa

• Intelbras GX 3000 Wireless Mesh Router
• Napajalni adapter
• Omrežni kabel
• Kratki vodnik (ni vključen v ta priročnik)

2.2. Naprava je končanaview

Slika 1: Spredaj View of the GX 3000 Router

This image displays the front of the Intelbras GX 3000 router, showing its sleek white design and LED indicators for 5G, 4G, call status, Wi-Fi, and WPS button.

Figure 2: GX 3000 Router with Highlighted Indicators and Ports

This image provides a closer look at the router, emphasizing the LED indicators on the front (5G, 4G, Call, Wi-Fi, WPS) and the various ports located on the rear panel, including LAN, WAN, and TEL ports.

2.2.1. Priključki na zadnji plošči

Figure 3: Rear Panel of the GX 3000 Router

This image shows the rear panel of the router, clearly displaying the LAN, WAN, and TEL ports for wired connections.

• Vrata LAN: Za povezovanje žičnih naprav, kot so računalniki, pametni televizorji ali igralne konzole.
• Vrata WAN: For connecting to an external modem or internet source (if not using 5G/4G).
• Vrata TEL: For voice services (if supported by your service provider).
• Vhodna moč: Priklopi se na priloženi napajalnik.

2.2.2. Bottom Panel Features

Figure 4: Bottom Panel Features of the GX 3000 Router

This diagram illustrates the bottom panel of the router, highlighting the TEST port, RESET button, and SIM CARD slot.

• TEST Port: Za diagnostične namene.
• Gumb RESET: Used to restore factory default settings. Press and hold for 10 seconds while the device is powered on.
• SIM CARD Slot: Insert your 5G/4G SIM card here for mobile broadband connectivity.

3. Nastavitev

3.1. Začetna namestitev

Place the router in a central location within your desired coverage area, away from obstructions, metal objects, and other electronic devices that may cause interference. Ensure good ventilation around the device.

3.2. Vstavljanje SIM kartice

1. Prepričajte se, da je usmerjevalnik izklopljen.
2. Locate the SIM CARD slot on the bottom panel of the router (refer to Figure 4).
3. Insert your activated 5G/4G SIM card into the slot with the gold contacts facing down and the notched corner oriented correctly. Push until it clicks into place.
4. Za odstranitev nežno potisnite kartico SIM nazaj, dokler ne skoči ven.

3.3. Priključitev napajanja

1. Connect one end of the power adapter to the Power Input port on the rear of the router.
2. Drugi konec napajalnika priključite v standardno električno vtičnico.
3. The router will power on automatically. Wait for the LED indicators to stabilize.

3.4. Wired Connections (Optional)

If you wish to connect devices via Ethernet:

1. Connect one end of the provided network cable to a LAN port on the rear of the router.
2. Connect the other end of the network cable to the Ethernet port of your computer, smart TV, or other wired device.

3.5. Začetna povezava z omrežjem Wi-Fi

The default Wi-Fi network name (SSID) and password are usually printed on a label on the bottom of the router. Follow these steps to connect:

1. Na brezžični napravi (pametnem telefonu, prenosniku, tablici) odprite nastavitve Wi-Fi.
2. Scan for available networks and select the SSID corresponding to your GX 3000 router.
3. Enter the default Wi-Fi password when prompted.
4. Ko je povezava vzpostavljena, lahko dostopate do usmerjevalnika web interface to customize settings.

4. Navodila za uporabo

4.1. LED indikatorji

LED-lučke na sprednji plošči zagotavljajo informacije o stanju:

• 5G LED: Prikazuje stanje omrežja 5G.
• 4G LED: Prikazuje stanje omrežja 4G.
• Call LED: Indicates voice service status.
• Wi-Fi LED: Označuje aktivnost omrežja Wi-Fi.
• WPS LED: Označuje stanje funkcije WPS.

Refer to the full user manual (if provided separately) for detailed LED behavior (e.g., solid, blinking, color) and their meanings.

4.2. Dostop do Web Upravljalni vmesnik

To configure advanced settings, manage your network, or change Wi-Fi credentials, access the router's web vmesnik:

1. Ensure your device is connected to the GX 3000's Wi-Fi network or via an Ethernet cable.
2. Odpri a web brskalnik (npr. Chrome, Firefox, Edge).
3. V naslovno vrstico vnesite privzeti IP-naslov usmerjevalnika (običajno 192.168.1.1 or 192.168.0.1) and press Enter. This information is usually on the label on the bottom of the router.
4. Vnesite privzeto uporabniško ime in geslo (najdete ju tudi na nalepki usmerjevalnika).
5. You will now be in the router's management interface, where you can customize settings such as Wi-Fi name, password, security protocols, and more.

4.3. Wi-Fi Protected Setup (WPS)

WPS allows you to connect Wi-Fi devices without entering the password manually:

1. Press the WPS button on the front of the GX 3000 router (refer to Figure 1). The WPS LED will start blinking.
2. Within two minutes, press the WPS button on your client device (e.g., Wi-Fi adapter, printer).
3. Napravi se bosta samodejno povezali.

Note: WPS is a convenient feature but may be less secure than manual password entry.

4.4. Mesh Network Expansion

The GX 3000 supports mesh networking to expand Wi-Fi coverage. You can add other compatible Intelbras Qi5 line products to create a seamless mesh network. Each additional Wi-Fi 6 router can extend coverage by up to 300 m². It is recommended to use up to 6 routers in the same mesh network for optimal performance.

Refer to the specific instructions provided with additional mesh units for pairing and configuration.

5. Vzdrževanje

5.1. Čiščenje naprave

• Pred čiščenjem se prepričajte, da je usmerjevalnik izklopljen in izklopljen iz električnega omrežja.
• Za brisanje zunanjosti naprave uporabite mehko, suho krpo.
• Do not use liquid cleaners, aerosols, or solvents, as they may damage the casing ali notranjih komponent.
• Prezračevalne odprtine naj bodo čiste od prahu in umazanije.

5.2. Posodobitve vdelane programske opreme

Periodically check the Intelbras official website for firmware updates. Firmware updates can improve performance, add new features, and enhance security. Follow the instructions provided with the firmware update package carefully.

5.3. Ponastavitev na tovarniške nastavitve

If you encounter persistent issues or forget your login credentials, you can reset the router to its factory default settings:

1. With the router powered on, locate the RESET button on the bottom panel (refer to Figure 4).
2. S sponko za papir ali podobnim koničastim predmetom pritisnite in držite gumb RESET približno 10 sekund.
3. Release the button. The router will restart with all settings restored to their original factory defaults.
4. You will need to reconfigure your Wi-Fi settings and any other custom configurations after a factory reset.

6. Odpravljanje težav

7. Specifikacije

8. Garancija in podpora

8.1. Informacije o garanciji

Intelbras products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Intelbras webspletnega mesta. Shranite dokazilo o nakupu za uveljavljanje garancije.

8.2. Tehnična podpora

If you require technical assistance or have questions not covered in this manual, please contact Intelbras customer support. You can find contact information (phone numbers, email, support portal) on the official Intelbras webspletno mesto:

Intelbras Official Webspletno mesto: www.intelbras.com.br

When contacting support, please have your product model (GX 3000) and serial number ready.