Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your ECOELER 6-Inch LED Motion Sensor Ceiling Light, Model CDR615C. This fixture features 16W power, 1000 lumens brightness, 3CCT selectable color temperature, and an adjustable motion sensor with timer countdown. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Varnostne informacije
Za preprečitev poškodb ali škode upoštevajte naslednje varnostne ukrepe:
- OPOZORILO: Nevarnost električnega udara. Pred namestitvijo ali servisiranjem izključite napajanje na varovalki ali odklopniku.
- Ta izdelek mora v skladu z veljavnim kodeksom namestitve namestiti oseba, ki je seznanjena s konstrukcijo in delovanjem izdelka ter s temi nevarnostmi.
- Prepričajte se, da so vse električne povezave varne in v skladu z lokalnimi predpisi in uredbami.
- Ne poskušajte spreminjati svetilke. Kakršne koli spremembe lahko razveljavijo garancijo in povzročijo varnostne nevarnosti.
- Do not install near heat sources or in areas with excessive moisture. This fixture is rated for indoor use.
- Med namestitvijo nosite zaščitna očala in rokavice.
Kaj je v škatli
Pred začetkom namestitve preverite, ali so prisotne vse komponente:
- Motion sensor ceiling light fixture
- E26 Adapter (for recessed can installation)
- Pritrdilni material (vijaki, matice)
- Navodila za uporabo (ta dokument)
Image: Included components and dimensions of the light fixture (7.48 inches diameter, 1.45 inches height).
Lastnosti izdelka
The ECOELER LED Motion Sensor Ceiling Light is designed with advanced features for convenience and energy efficiency.
Slika: Konecview of product features including PIR Motion Sensor, 3 Color Temperatures, and Time Delay adjustment.
3CCT Selectable Color Temperature
This fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). You can easily select your preferred lighting ambiance by adjusting a switch located inside the lampsenca. Note: This light is non-dimmable.
Image: Visual representation of 3000K, 4000K, and 5000K color temperatures.
Funkcionalnost senzorja gibanja
The integrated Passive Infrared (PIR) motion sensor automatically detects movement within its range. The light will turn on when motion is sensed and ambient light conditions are dark enough. It will remain off in bright environments to save energy.
Nastavljiv časovni zamik
The light features an adjustable time delay, allowing you to set how long the light remains on after motion stops. Options include 30 seconds, 1 minute, and 5 minutes.
Image: A person walking under the light, illustrating the countdown timer for 30 seconds, 1 minute, and 5 minutes.
Navodila za namestitev
Before installation, ensure the power supply is turned off at the circuit breaker. This fixture can be installed in a junction box or a recessed can.
Image: Installation diagrams for Junction Box and Recessed Can.
Junction Box Installation (3.5 or 4-inch J-Box)
- Izklopite napajanje na odklopniku.
- Remove the existing fixture from the junction box.
- Connect the fixture's wires to the junction box wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground).
- Pritrdite priključek na razvodno omarico s priloženimi vijaki.
- Ensure the fixture is flush with the ceiling.
- Obnovite napajanje in preizkusite luč.
Recessed Can Installation (5 or 6-inch Can)
- Izklopite napajanje na odklopniku.
- If applicable, remove the existing bulb and trim from the recessed can.
- Screw the E26 adapter into the recessed can's socket.
- Connect the fixture's wires to the E26 adapter's wires using the provided wire nuts.
- Attach the spring tabs (if not pre-attached) to the fixture.
- Gently push the fixture into the recessed can until the spring tabs secure it in place.
- Obnovite napajanje in preizkusite luč.
Navodila za uporabo
Prilagajanje barvne temperature (CCT)
Za spremembo barvne temperature:
- Prepričajte se, da je napajanje izklopljeno.
- Previdno odprite ali odstranite lampsenca.
- Locate the CCT selection switch on the fixture's circuit board.
- Slide the switch to your desired setting: 3000K, 4000K, or 5000K.
- Ponovno pritrdite lampvarno senčiti.
- Obnovi moč.
Nastavitev časovnega zamika
To adjust the time the light stays on after motion ceases:
- Prepričajte se, da je napajanje izklopljeno.
- Previdno odprite ali odstranite lampsenca.
- Locate the time delay switch on the fixture's circuit board.
- Slide the switch to your desired setting: 30 seconds, 1 minute, or 5 minutes.
- Ponovno pritrdite lampvarno senčiti.
- Obnovi moč.
Delovanje senzorja gibanja
The motion sensor operates based on ambient light levels and detected movement:
- podnevi: The light will remain OFF even if motion is detected, conserving energy.
- Nighttime/Dark Environments: The light will automatically turn ON when motion is sensed within its detection range (9-16 feet).
- Samodejno izklop: After motion stops, the light will turn OFF after the pre-set time delay (30s, 1min, or 5min).
Image: Visual guide to motion sensor behavior during day and night.
Vzdrževanje
To ensure optimal performance and longevity of your ECOELER LED Motion Sensor Ceiling Light, follow these simple maintenance guidelines:
- Čiščenje: Pred čiščenjem izključite napajanje. Uporabite mehko, suho ali rahlo mehko krpo.amp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
- Pregled: Periodically check for any loose connections or signs of damage. If any issues are found, consult a qualified electrician.
- Zamenjava žarnice: This LED fixture does not have user-replaceable bulbs. The LED components are designed for long-term use.
Odpravljanje težav
If you encounter issues with your light, refer to the table below for common problems and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Luč se ne vklopi. | No power; Sensor not detecting motion; Ambient light too bright; Incorrect wiring. | Check circuit breaker; Ensure motion is within range; Verify ambient light is dark enough; Check wiring connections. |
| Svetloba neprekinjeno sveti. | Constant motion detected; Time delay set too long; Sensor malfunction. | Ensure no continuous motion; Adjust time delay setting; Contact support if issue persists. |
| Svetloba utripa ali zatemni. | Loose wiring; Voltage fluctuations; Fixture damage. | Check all wiring connections; Consult an electrician for voltage issues; Contact support if damaged. |
| Motion sensor is not responsive. | Sensor obstructed; Incorrect sensitivity; Ambient light too bright. | Clear any obstructions; Ensure ambient light is low; Sensor sensitivity is fixed for this model. |
Specifikacije
| Znamka | ECOELER |
| Številka modela | CDR615C |
| Wattage | 16 vatov |
| Svetlost | 1000 lumnov |
| Barvna temperatura | 3000K Warm White, 4000K Cool White, 5000K Daylight (Selectable) |
| voltage | 120 volta |
| Nadzorna metoda | Senzor gibanja |
| Razpon senzorja gibanja | 9-16 čevljev |
| Nastavitve časovnega zamika | 30 seconds, 1 minute, 5 minutes (Adjustable) |
| Material | Akril, aluminij |
| Dimenzije (D x Š x V) | 7.48 cm x 1.45 cm x 7.48 cm |
| Vrsta namestitve | Flush Mount (Junction Box or Recessed Can) |
| Certifikati | ETL, FCC Listed |
| Notranja/zunanja uporaba | Notranja |
Garancija in podpora
Informacije o garanciji: All ECOELER products come with a 1-year warranty from the date of purchase. For any non-man-made damage under normal use, please contact our support team for a replacement solution.
Podpora strankam: If you have any questions, require assistance with installation, or need to claim your warranty, please visit the official ECOELER store or contact our customer service team. You can find more information and contact details on the ECOELER Brand Store.