JVC HA-XC72T

JVC HA-XC72T Wireless Headphones User Manual

Model: HA-XC72T

Uvod

Hvala za nakupasing the JVC HA-XC72T Wireless Headphones. This manual provides essential information for the safe and effective use of your device. Please read it thoroughly before use and keep it for future reference.

Varnostne informacije

  • Enote ne razstavljajte, popravljajte ali spreminjajte.
  • Izogibajte se izpostavljanju enote ekstremnim temperaturam, neposredni sončni svetlobi ali visoki vlažnosti.
  • Keep the unit away from water and other liquids, except for its specified water resistance.
  • Do not use the unit at excessively high volumes for extended periods to prevent hearing damage.
  • Hraniti izven dosega otrok. Majhni deli lahko predstavljajo nevarnost zadušitve.

Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

  • JVC HA-XC72T Wireless Headphones (Left and Right earbuds)
  • etui za polnjenje
  • USB polnilni kabel
  • Earpieces (S/M/L sizes)
  • "XX" Logo Sticker

Nastavitev

1. Polnjenje slušalk in etuija

Pred prvo uporabo popolnoma napolnite slušalke in polnilno ohišje.

  1. Place both left and right earphones into the charging case.
  2. Connect the USB charging cable to the charging case and a USB power adapter (not included).
  3. Indikator polnjenja lamps on the case will show the charging status. Once fully charged, the lamps will change or turn off.
JVC HA-XC72T charging case with earbuds, held in a hand.

The JVC HA-XC72T charging case with earbuds, held in a hand, highlighting the long battery life of up to 21 hours (9 hours from earbuds + 12 hours from case). Actual playback time may vary.

2. Bluetooth seznanjanje

Če želite slušalke povezati z napravo:

  1. Take both earphones out of the charging case. They will automatically enter pairing mode. The indicator lamp on one earbud will flash rapidly.
  2. V napravi (pametnem telefonu, tabličnem računalniku itd.) omogočite Bluetooth in poiščite razpoložljive naprave.
  3. Select "HA-XC72T" from the list of found devices.
  4. Once connected, the indicator lamp neha utripati.

Navodila za uporabo

Vklop/izklop

  • Vklop: Take the earphones out of the charging case. They will power on automatically.
  • Ugasniti: Place the earphones back into the charging case. They will power off automatically and begin charging.

Predvajanje glasbe in nadzor glasnosti

The HA-XC72T features touch controls on each earbud.

  • Predvajanje/pavza: Enkrat se dotaknite senzorja na dotik na kateri koli slušalki.
  • Naslednja skladba: Tap the touch sensor on the right earbud twice.
  • Prejšnja skladba: Tap the touch sensor on the left earbud twice.
  • Povečaj glasnost: Tap the touch sensor on the right earbud three times.
  • Znižaj glasnost: Tap the touch sensor on the left earbud three times.

Noise Cancelling / Ambient Sound Mode

The headphones offer Active Noise Cancellation and a Quick Ambient Sound function.

A person wearing the JVC HA-XC72T earbud, with visual representation of noise cancellation waves.

A person wearing the JVC HA-XC72T earbud, with visual representation of noise cancellation waves, emphasizing the ability to enjoy sound in quiet environments.

  • Preklapljanje načinov: Press and hold the touch sensor on the left earbud for approximately 2 seconds to cycle through Noise Cancelling ON, Ambient Sound ON, and Noise Cancelling OFF.
  • Quick Ambient Sound: This function allows you to hear your surroundings without removing the earphones, useful for conversations.

Način nizke zakasnitve

This mode reduces audio delay, enhancing the experience for gaming and video playback.

A person enjoying video content on a smartphone while wearing the JVC HA-XC72T earbuds.

A person enjoying video content on a smartphone while wearing the JVC HA-XC72T earbuds, illustrating the low latency mode for synchronized audio and video.

  • Aktiviraj/deaktiviraj: Press and hold the touch sensor on the right earbud for approximately 2 seconds to toggle Low Latency Mode ON/OFF.

Prostoročno klicanje

  • Sprejmi/končaj klic: Enkrat se dotaknite senzorja na dotik na kateri koli slušalki.
  • Zavrni klic: Press and hold the touch sensor on either earbud for approximately 2 seconds.

Uporaba ene ušesne slušalke

Either the left or right earbud can be used independently for music playback or calls.

Vzdrževanje

To ensure the longevity and performance of your headphones:

  • Slušalke in polnilno ohišje redno čistite z mehko, suho krpo.
  • Ne uporabljajte abrazivnih čistil ali topil.
  • Ensure the earphones are dry before placing them back into the charging case.
  • Ko slušalk ne uporabljate, jih shranite v polnilno škatlico, da jih zaščitite pred prahom in poškodbami.
The JVC HA-XC72T earbuds on a wet surface, demonstrating their IP55 water and dust resistance.

The JVC HA-XC72T earbuds on a wet surface, demonstrating their IP55 water and dust resistance, suitable for outdoor use. Note: IP55 rating applies to the earbud body only.

Odpravljanje težav

If you encounter issues with your HA-XC72T headphones, refer to the following common solutions:

No Sound from One Earbud (or other pairing issues)

If only one earbud is producing sound, or if you experience other pairing difficulties, try the following steps:

  1. Place both left and right earphones back into the charging case.
  2. Take both left and right earphones out of the case simultaneously. Check if the issue is resolved.
  3. If the issue persists, delete the "HA-XC72T" Bluetooth registration from your device's Bluetooth settings and attempt to re-pair.
  4. If the above steps do not resolve the issue, perform a factory reset (initialization) as follows:

Factory Reset (Initialization) Steps:

  1. Place both left and right earphones into the charging case. Ensure the charging lamps are lit, indicating they are charging.
  2. While the earphones are in the case, press and hold the touch sensors on both the left and right earphones for approximately 15 seconds. The lamp will blink or its reaction will change, indicating initialization is in progress. Perform this for both earbuds.
  3. Release your fingers from the touch sensors and close the charging case lid.
  4. Wait for approximately 10-20 seconds.
  5. Take both left and right earphones out of the case simultaneously. The earphones will begin synchronizing with each other again.
  6. On your smartphone or device, open the Bluetooth settings. If "HA-XC72T" is still listed, select "Forget Device" or "Delete Device".
  7. Perform the Bluetooth pairing process again from step 1 of the "Bluetooth Pairing" section.

Brez moči

  • Prepričajte se, da sta polnilna škatlica in slušalke popolnoma napolnjeni.
  • Preverite, ali je polnilni kabel varno priključen.

Slaba kakovost zvoka

  • Ensure the earphones are properly seated in your ears. Try different earpiece sizes for a better seal.
  • Za zmanjšanje motenj se premaknite bližje povezani napravi.
  • Clean any debris from the earphone nozzles.

Specifikacije

ZnamkaJVC
Ime modelaHA-XC72T
Vrsta slušalkV ušesu
barvaČrna
Brezžična vrstaBluetooth (Ver. 5.2, Power Class 1)
Nadzor hrupaAktivno odpravljanje hrupa
Nadzorna metodaDotik
Ocena vodotesnostiIP55 (Earphone body only)
Ocena odpornosti proti prahuIP55 (Earphone body only)
Teža izdelkaApprox. 4.6 grams (each earbud)
Teža ohišja za polnjenjePribl. 34 gramov
Življenjska doba baterije (slušalke)Up to 7.5 hours (with Noise Cancelling ON)
Skupna življenjska doba baterije (z ohišjem)Up to 21 hours (9 hours from earbuds + 12 hours from case)
Dodatne funkcijeDeep Bass Sound, Low Latency Mode, Ambient Sound Mode, Hands-free Calling, Single Earbud Use

Garancija

This product comes with a 1-year manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Podpora

For further assistance, technical support, or warranty inquiries, please contact JVC customer service through their official webspletnega mesta ali kontaktnih podatkov, ki so navedeni na embalaži izdelka.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.