ZÜNDAPP Kingmeter LED Display T320 Green 1.0 / Z101 / Z101+ User Manual

Uvod

This manual provides essential information for the proper installation, operation, and maintenance of your ZÜNDAPP Kingmeter LED Display. This display is compatible with ZÜNDAPP Green 1.0, Z101, and Z101+ electric bicycles manufactured from July 2021 onwards. Please read these instructions carefully before use to ensure optimal performance and safety.

Konec izdelkaview

The ZÜNDAPP Kingmeter LED Display serves as the central control unit for your electric bicycle, providing critical information and allowing you to manage assistance levels.

Slika: Spredaj view of the ZÜNDAPP Kingmeter LED Display, showing the power button, assist level buttons (+/-), and light control button. LED indicators for power and assist levels are visible at the top.

The display unit includes:

• LED indikatorji: For battery charge level and pedal assistance level.
• Gumbi za upravljanje: Four buttons for power, assistance level adjustment, and light control.
• Kabel: A 220 mm cable with a 5-pin round BUS connector.

Nastavitev in namestitev

Follow these steps to properly install the Kingmeter LED Display on your electric bicycle.

1. Namestitev zaslona:

   The display features a 22.2 mm clamp, suitable for most standard bicycle handlebars. Position the display on your handlebar in a location that is easily accessible and visible while riding, without obstructing other controls. Securely tighten the clamp vijaki.

   

   Slika: Bližnji posnetek view of an electric bicycle handlebar with the ZÜNDAPP Kingmeter LED Display mounted. The display is centrally positioned for easy access and visibility.

2. Priključitev kabla:

   Locate the corresponding 5-pin round BUS connector on your electric bicycle's wiring harness. Carefully align the pins and push the display's connector firmly into place until it clicks. Ensure a secure connection to prevent moisture ingress and signal loss.

   

   Slika: Podrobno view of the 5-pin round BUS connector, showing the pin configuration. This connector is used to link the display to the e-bike's electrical system.

   

   Slika: The rear side of the ZÜNDAPP Kingmeter LED Display, showing the integrated cable and a sticker indicating "36V", confirming its voltage združljivost.

Navodila za uporabo

The Kingmeter LED Display features a simple 4-button interface for easy operation.

Slika: Jasno view of the ZÜNDAPP Kingmeter LED Display, highlighting the four control buttons: Power (red), Plus (+), Minus (-), and Light (headlight icon). LED indicators for battery and assist levels are also visible.

• Vklop/izklop: Pritisnite in držite rdeči gumb za vklop (⑂) to turn the display and the e-bike system on or off.
• Adjusting Assistance Level:
  • Pritisnite Gumb »+« to increase the pedal assistance level.
  • Pritisnite Gumb '-' to decrease the pedal assistance level.
  • The current assistance level (0, 1, 2, 3) is indicated by the LED lights. Level 0 means no assistance.
• Nadzor svetlobe: Pritisnite gumb za luč (🚲) to turn your e-bike's lights on or off.
• Indikator nivoja baterije: The "POWER" LED indicators at the top of the display show the remaining battery charge. "LOW" indicates a low battery level.

Vzdrževanje

To ensure the longevity and proper functioning of your Kingmeter LED Display, follow these simple maintenance guidelines:

• Čiščenje: Wipe the display surface with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic and electronic components.
• Zaščita pred vlago: While the display is designed for outdoor use, avoid prolonged exposure to heavy rain or direct water jets. Ensure the connector is always securely fastened.
• Pregled kabla: Periodically check the cable and connector for any signs of wear, damage, or corrosion. Replace if necessary.
• Shranjevanje: Ko električnega kolesa in razstavnega prostora dalj časa ne uporabljate, ga shranite v suhem in zmerno hladnem okolju.

Odpravljanje težav

If you encounter issues with your Kingmeter LED Display, refer to the following common problems and solutions:

If you cannot resolve the issue using the troubleshooting guide, please contact ZÜNDAPP customer support or an authorized service center.

Specifikacije

Garancija in podpora

For warranty information, please refer to the documentation provided with your electric bicycle or contact your point of purchase. For technical support or service inquiries, please visit the official ZÜNDAPP webali se obrnite na njihov oddelek za pomoč uporabnikom.

Opomba: Unauthorized modifications or repairs may void your warranty.