TEEHO TE002H Fingerprint Keyless Digital Front Door Handle & Deadbolt Set

1. Uvod

This manual provides detailed instructions for the installation, setup, operation, and maintenance of your TEEHO TE002H Fingerprint Keyless Digital Front Door Handle and Deadbolt Set. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Varnostne informacije

• Ne poskušajte razstavljati ali spreminjati ključavnice. To lahko povzroči poškodbe in razveljavi garancijo.
• Use only specified batteries (4 AA batteries, not included). Do not mix old and new batteries or different types of batteries.
• Keep physical keys in a secure location outside the property, accessible only to trusted individuals.
• Avoid exposing the lock to direct water spray or harsh chemicals. The lock is IP54 weatherproof, designed for general outdoor exposure, but not submersion.
• Ensure all screws are tightened securely during installation to prevent loosening over time.
• Regularly check battery levels and replace batteries promptly when the low battery alert is activated.

3. Vsebina paketa

Pred začetkom namestitve preverite, ali so prisotne vse komponente:

• 1 x Interior Mount
• 1 x Fingerprint Exterior Mount
• 1 x Handle (Exterior)
• 1 x Handle (Interior)
• 2 x Latches
• 2 x Replacement Seller Keys
• 1 x montažna plošča
• Required Screw Kits
• Navodila za namestitev (ta priročnik)

4. Specifikacije izdelka

Slika: Konecview of the TEEHO TE002H lock highlighting its functions, security, and durability features including IP54 waterproofing, wide temperature range, ANSI Grade 3 certification, 1-year battery life, wrong code limit, low battery alert, silent mode, anti-peeping code, and vacation mode.

Image: The TEEHO TE002H lock illustrating its four unlocking methods: fingerprint recognition, user-defined codes, one-time PIN codes, and traditional physical keys.

5. Namestitev

Pred namestitvijo se prepričajte, da vaša vrata izpolnjujejo naslednje specifikacije:

• Debelina vrat: 1-3/4" (45mm) to 1-1/4" (30mm)
• Nazaj: 2-3/8" (60 mm) ali 2-3/4" (70 mm)
• Prečna izvrtina: 2-1/8" (54 mm)
• Edge Bore: 1" (25.4 mm)

Image: Detailed diagram illustrating the required door dimensions and compatibility for both left-handed and right-handed door installations.

Koraki namestitve:

1. Pripravite vrata: Ensure your door has the correct bore holes and backset. If necessary, use the provided template to drill new holes.
2. Namestite zapah: Vstavite zapah v rob vrat in ga pritrdite z vijaki. Prepričajte se, da je zapah obrnjen v pravilno smer glede na odpiranje vrat.
3. Namestitev zunanjega sklopa: Route the cable through the door and align the exterior keypad/fingerprint unit with the latch.
4. Namestite notranjo montažno ploščo: Notranjo montažno ploščo pritrdite na zunanji sklop s priloženimi vijaki.
5. Priključite kable in namestite notranji sklop: Connect the cable from the exterior unit to the interior unit. Carefully tuck excess cable into the door. Attach the interior assembly, ensuring the thumb turn operates smoothly.
6. Install the Handle Set: Attach the exterior and interior handle components, securing them with the appropriate screws.
7. Vstavite baterije: Open the battery cover on the interior unit and insert 4 new AA batteries.
8. Testno delovanje: Test the lock with a physical key, then proceed to programming.

6. Nastavitev in programiranje

Follow these steps to program your lock:

6.1. Master Code Setup

The first step is to set a Master Code. This code is used to access programming functions. Refer to the quick start guide for initial master code setup instructions.

6.2. Dodajanje prstnih odtisov

The lock supports up to 20 unique fingerprints.

1. Enter the Master Code, then press the 'Program' button (usually a gear icon or specific key).
2. Select the option to add a fingerprint.
3. Place your finger on the fingerprint sensor. You will be prompted to lift and place your finger several times for accurate registration.
4. Repeat for additional fingerprints or exit programming mode.

Image: The TEEHO TE002H lock, illustrating its capacity to store up to 20 unique fingerprints and user codes for multiple users.

6.3. Dodajanje uporabniških kod

The lock supports up to 20 user codes (4-10 digits).

1. Enter the Master Code, then press the 'Program' button.
2. Select the option to add a user code.
3. Enter your desired user code, then press the 'Lock' button (or designated confirmation key).
4. Re-enter the user code to confirm.
5. Repeat for additional user codes or exit programming mode.

6.4. One-Time PIN Codes

Generate temporary codes for guests or service personnel. These codes expire after a single use.

1. Enter the Master Code, then press the 'Program' button.
2. Select the option to generate a one-time code.
3. The lock will display or generate a temporary code. Provide this code to the intended user.

Image: An illustration of how one-time PIN codes can be used, showing a person receiving a temporary code via a mobile device to grant access.

6.5 Funkcija samodejnega zaklepanja

The auto-lock feature automatically locks the deadbolt after a set period (10-99 seconds) once unlocked.

1. Enter the Master Code, then press the 'Program' button.
2. Select the auto-lock setting.
3. Enter the desired delay time in seconds (e.g., 30 for 30 seconds).
4. Confirm the setting or exit programming mode.

Image: The auto-lock function in action, showing the deadbolt engaging automatically after a user-defined delay, enhancing security.

6.6. Način počitnic

Activate vacation mode to disable all user codes and fingerprints, allowing entry only via physical key or Master Code. This is useful for extended periods away from home.

1. Enter the Master Code, then press the 'Program' button.
2. Select the vacation mode option to enable or disable it.

6.7. Način izklopa zvoka

Enable mute mode to silence all keypad tones for quiet operation.

1. Enter the Master Code, then press the 'Program' button.
2. Select the mute mode option to enable or disable it.

7. Navodila za uporabo

7.1. Odklepanje vrat

• Uporaba prstnega odtisa: Place your registered finger on the fingerprint sensor. The lock will unlock within approximately 0.3 seconds.


Image: A user demonstrating the quick fingerprint recognition feature, unlocking the door in approximately one second.

• Using Keypad Code: Enter your 4-10 digit user code or one-time PIN code on the keypad, then press the 'Lock' button (or designated confirmation key).
• Using Physical Key: Vstavite fizični ključ v ključavnico in ga obrnite, da odklenete.

7.2. Zaklepanje vrat

• Zaklepanje z enim dotikom: Press and hold any key on the keypad for 2 seconds to lock the deadbolt.
• Samodejno zaklepanje: If the auto-lock feature is enabled, the door will automatically lock after the set delay time.

7.3. Anti-Peeping Code

To prevent others from guessing your code, you can enter random digits before or after your actual code. For example, if your code is 123456, you can enter 987123456012. As long as the correct code sequence is embedded, the lock will open.

Image: The anti-peeping tactile keypad feature, demonstrating how to input random digits before or after your actual passcode to protect it from observation.

8. Vzdrževanje

8.1. Zamenjava baterije

The lock will provide a low battery alert when power is critically low. Replace all four AA batteries promptly to ensure continuous operation.

1. Odstranite pokrov baterije na notranjem sklopu.
2. Odstranite stare baterije.
3. Vstavite štiri nove baterije AA in pazite na pravilno polarnost.
4. Zamenjajte pokrov baterije.

Image: The lock displaying a low battery indicator, with a note on energy conservation providing up to 6 months of battery life using 4 AA batteries.

8.2. Čiščenje

Zunanjost ključavnice obrišite z mehko krpoamp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish and electronic components.

9. Odpravljanje težav

10. Garancija in podpora

TEEHO products are designed for durability and reliability. For specific warranty details, please refer to the warranty card included with your product or visit the official TEEHO website. If you encounter any issues not covered in this manual, please contact TEEHO customer support for assistance.

Kontaktni podatki: Refer to your product packaging or the official TEEHO webza najnovejše kontaktne podatke za podporo strankam.