Uporabniški priročnik za zaganjalnik LOKITHOR J3250 PRO

1. Uvod

The LOKITHOR J3250 PRO is a powerful and versatile LiFePO4 jump starter designed to provide reliable starting power for vehicles with up to 9.5L gasoline and 7.5L diesel engines. It also functions as a portable power bank and features an integrated LED flashlight. This manual provides essential information for safe and effective use, setup, operation, maintenance, and troubleshooting of your device.

2. Varnostne informacije

Please read and understand all safety instructions before operating the LOKITHOR J3250 PRO. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Zaščita oči: Pri delu z baterijami vedno nosite zaščitna očala.
• Prezračevanje: Napravo uporabljajte v dobro prezračenem prostoru.
• otroci: Napravo hranite izven dosega otrok.
• Kratki stiki: Ne dovolite rdečega in črnega clamps to touch each other or the same metal object.
• Povratna polarnost: Ensure correct polarity connection (red to positive, black to negative) to avoid damage. The device includes reverse-polarity protection.
• Vlaga: Do not immerse the device in water. While it has an IP65 rating for water and dust resistance, it is not designed for submersion.
• Poškodbe: Do not use the device if it is damaged. Contact customer support for assistance.
• Temperatura: Do not expose the device to extreme heat or fire. Store within recommended temperature ranges.

The LOKITHOR J3250 PRO incorporates 10 safety protection technologies, including spark-proof, reverse-polarity, short-circuit, reverse-charge, low-temperature, high-temperature, over-voltage, over-load, over-charge, and over-current protection.

3. Izdelek je končanview

3.1 Kaj je v škatli

• LOKITHOR J3250 PRO Jump Starter Unit
• Jumper Starter Clamps
• Kabel USB-A v USB-C
• Kabel USB-C v USB-C
• 12V adapter
• Torba za shranjevanje dodatkov
• Uporabniški priročnik

Included components with the LOKITHOR J3250 PRO Jump Starter.

3.2 Ključne lastnosti

• High Starting Current: Dostavi 3250 Amp peak current for reliable vehicle starting.
• Združljivost motorja: Suitable for gasoline engines up to 9.5 liters and diesel engines up to 7.5 liters.
• LiFePO4 Battery Technology: Offers over 2000 cycles at 100% depth of discharge, providing extended lifespan and enhanced chemical stability compared to traditional lead-acid or lithium-ion batteries.
• Napredna varnost: Features 10 types of protection, including spark-proof, mistake-proof, and reverse-polarity protection.
• 100W Two-way Fast Charging: Recharges the unit in approximately 60 minutes and can provide power output for USB-C devices.
• ConnectMax Technology: Automatically detects clamp connection impedance to optimize starting efficiency.
• Prenosna Power Bank: Provides 74.24Wh capacity with USB-A and USB-C outputs for charging phones, tablets, laptops, and other devices.
• 400-Lumen LED Flashlight: Includes multiple modes (constant, strobe, SOS) for emergency lighting.
• Trajna zasnova: IP65 waterproof and dustproof rating, designed to operate in temperatures from -4°F to 140°F (-20°C to 60°C).
• Dolg čas pripravljenosti: Maintains charge for up to 42 months (1260 days) with minimal self-discharge.

The J3250 PRO provides 3250A peak current, suitable for large engines.

The device features an IP65 rating for water and dust resistance.

4. Nastavitev in polnjenje

4.1 Začetno polnjenje

Before first use, fully charge the LOKITHOR J3250 PRO. This ensures optimal performance and extends battery life.

1. Connect the provided USB-C to USB-C cable to the jump starter's USB-C input port.
2. Connect the other end of the USB-C cable to a 100W Power Delivery (PD) compatible wall charger (not included) or use the included 12V adapter.
3. The display will show charging progress. A full charge typically takes about 60 minutes with a 100W PD charger.

4.2 Recharging the Device

It is recommended to recharge the jump starter after each use. If not used regularly, recharge the unit every 3-6 months to maintain battery health and readiness.

5. Navodila za uporabo

5.1 Jump Starting a Vehicle (Normal Mode)

Use Normal Mode for vehicles with a partially discharged battery.

1. Priložite Clamps: Priključite rdeči (+) clamp to the positive terminal of the vehicle battery. Connect the black (-) clamp na negativni priključek akumulatorja vozila.
2. Vklop: Turn on the LOKITHOR J3250 PRO. The device will automatically detect the battery and prepare for jump starting.
3. Zagon vozila: Zaženite svoje vozilo.
4. Izklop in odklop: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps iz akumulatorja vozila.

Steps for jump starting a vehicle using Normal Mode.

5.2 Jump Starting a Vehicle (Boost Mode)

Use Boost Mode for completely dead batteries where Normal Mode does not initiate a jump start.

1. Pritrdite rdečo Clamp: Priključite rdeči (+) clamp na pozitivni pol akumulatorja vozila.
2. Activate Boost: Long press the 'Boost' button on the jump starter for more than 5 seconds. The display will indicate Boost Mode is active.
3. Pritrdite črno barvoamp: Povežite črni (-) klamp na negativni priključek akumulatorja vozila.
4. Zagon vozila: Start your vehicle within 30 seconds of activating Boost Mode.
5. Izklop in odklop: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps iz akumulatorja vozila.

Steps for jump starting a vehicle using Boost Mode for completely dead batteries.

5.3 Uporaba kot prenosna powerbanka

The J3250 PRO can charge various electronic devices.

• Connect your device to the USB-A output port (12V/1.5A, 18W QC) or the USB-C output port (20V/5A, 100W PD).
• The device will automatically begin charging.

The J3250 PRO can charge multiple electronic devices.

5.4 Uporaba LED svetilke

The integrated 400-lumen LED flashlight provides illumination and emergency signaling.

• Press the flashlight button once for constant illumination.
• Ponovno pritisnite, da preklapljate med načinoma Strobe in SOS.
• Pritisnite četrtič, da ugasnete svetilko.

The 400-lumen LED flashlight offers multiple modes for various situations.

6. Vzdrževanje

• Redno polnite: To prolong battery life, recharge the unit after each use. If stored, recharge every 3-6 months.
• Shranjevanje: Store the jump starter in a cool, dry place, away from direct sunlight and moisture. The device has a standby time of up to 42 months when fully charged.
• Čiščenje: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Clamp Nega: Zagotovite clamps are clean and free of corrosion for optimal connection.

The J3250 PRO maintains charge for up to 42 months in standby.

7. Odpravljanje težav

If you encounter issues with your LOKITHOR J3250 PRO, refer to the following common troubleshooting steps:

• Naprava se ne vklopi: Ensure the device is charged. If the battery is completely depleted, charge it for at least 15-30 minutes before attempting to power on.
• Vehicle Not Starting (Normal Mode):
  • Preverite, ali je clampso varno priključeni na pravilne priključke akumulatorja (rdeča na pozitivni, črna na negativni pol).
  • Ensure the vehicle battery terminals are clean and free of corrosion.
  • If the vehicle battery is completely dead, try using Način povečanja.
• Vehicle Not Starting (Boost Mode): Ensure the Boost Mode was activated correctly (long press for 5 seconds) and the vehicle was started within 30 seconds.
• Clamps Sparking: This is normal if the clamps are connected incorrectly or if there is a poor connection. Ensure proper connection and clean terminals. The device has spark-proof protection.
• Pregrevanje naprave: The device has high-temperature protection. If it feels excessively hot, disconnect it and allow it to cool down before further use.
• Težave s polnjenjem: Ensure the charging cable and adapter are functioning correctly and are compatible with 100W PD for fast charging.

If problems persist, please contact LOKITHOR customer support.

8. Specifikacije

The J3250 PRO is designed to operate in a wide range of temperatures.

9. Garancija in podpora

LOKITHOR products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official LOKITHOR webspletno mesto ali se obrnite neposredno na njihovo službo za pomoč strankam. Račun shranite kot dokazilo o nakupu za uveljavljanje garancije.

If you have any after-sales questions, please feel free to contact us.