Qiilu EM50SP 3960W Electric Motorcycle ECU Sine Controller Instruction Manual

1. Uvod in konecview

This manual provides essential information for the installation, operation, and maintenance of the Qiilu EM50SP 3960W Electric Motorcycle ECU Sine Controller. This controller is designed to effectively manage electric motors, enhancing speed and power for electric motorcycles and similar vehicles. It features PC programmability and an IP67 waterproof rating, ensuring reliable performance in various conditions.

The controller is specifically designed for compatibility with QS wheel hub motors and QS medium drive motors. For other motor types, self-testing is required to ensure proper function.

2. Varnostne informacije

Pomembno: Read all instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the product, property, or personal injury.

• Pred namestitvijo ali vzdrževanjem se prepričajte, da so vsi viri napajanja odklopljeni.
• Installation should be performed by qualified personnel with experience in electrical systems.
• Do not expose the controller to extreme temperatures or corrosive environments beyond its specified operating conditions.
• Preden priključite napajanje, preverite, ali so vse povezave varne in pravilne.
• The controller is IP67 rated for water and dust resistance; however, avoid intentional submersion or high-pressure water jets.

3. Vsebina paketa

Preverite, ali so v vašem paketu prisotni vsi spodaj navedeni elementi:

• 1 x ECU Sine Controller
• 3 x Kabelski snopi
• 5 x velika vijaka
• 4 x majhna vijaka

Image: The complete Qiilu ECU Sine Controller kit, showing the main controller unit, three wiring harnesses, and a set of mounting screws.

4. Specifikacije

Slika: Zgoraj in spodaj views of the controller, highlighting its robust construction and connection interfaces.

5. Nastavitev in namestitev

The controller is designed for use with QS wheel hub motors and QS medium drive motors. Ensure your motor is compatible or perform necessary testing if using other motor types.

5.1 Žične povezave

Connect the wiring harnesses to the controller and your electric vehicle's components according to the following guidelines:

• Hall Plug: Connect the Hall sensor wires from your motor to the corresponding Hall plug on the controller.
• Throttle (0-5V): Connect your vehicle's throttle input to the designated throttle port on the controller. This typically operates within a 0-5V range.
• High Brake (12V): Connect the high brake signal (12V) to the controller's brake input.
• Reverse Drive: Connect the reverse drive switch or signal as required for reverse functionality.
• Low Speed (0V): The controller supports low speed operation when the voltage je 0.

Image: The various wiring harnesses and mounting screws provided for connecting the controller to your electric vehicle's system.

5.2 Montaža

Securely mount the controller using the provided screws in a location that allows for adequate ventilation and protection from physical damage. Ensure all connections are firm and properly insulated.

6. Navodila za uporabo

Once properly installed, the controller manages the electric motor's functions based on your vehicle's inputs.

• Nadzor motorja: The controller efficiently manages the motor's power output, enhancing speed and overall performance.
• Programiranje z računalnikom: The controller supports PC programming, allowing for customization of various parameters. This includes adjusting motion models, parking functions, anti-theft features, and magnetic flux attenuated current settings. Refer to the specific PC software documentation for detailed programming instructions.
• Integrirane funkcije: The controller supports functions such as reverse drive, braking, and low-speed operation, integrating seamlessly with your vehicle's control system.

Image: An electric motorcycle shown with the controller and wiring, demonstrating the product's intended use in an electric vehicle.

7. Vzdrževanje

To ensure the longevity and optimal performance of your Qiilu ECU Sine Controller, follow these maintenance guidelines:

• Redni pregled: Periodically inspect the controller and all wiring connections for any signs of wear, damage, or corrosion.
• Čiščenje: Keep the controller clean and free from dirt, dust, and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or abrasive materials.
• Varstvo okolja: Although IP67 rated, ensure the controller is not continuously exposed to harsh weather conditions or extreme temperatures.
• Posodobitve vdelane programske opreme: If available, regularly check for and apply any firmware updates provided by the manufacturer to ensure the controller operates with the latest features and bug fixes.

8. Odpravljanje težav

If you encounter issues with your controller, consider the following basic troubleshooting steps:

• Brez napajanja: Check all power connections, including the battery and ignition switch. Ensure the battery voltage is within the specified 72V range.
• Motor se ne odziva: Verify that the throttle input is correctly connected and functioning. Check Hall sensor connections for proper seating.
• Neenakomerno vedenje: Inspect all wiring for loose connections or damage. Ensure no wires are short-circuiting.
• Težave s programiranjem: If experiencing problems with PC programming, ensure the correct software and drivers are installed and that the connection cable is secure.

Če težave po teh preverjanjih ne odpravite, je priporočljivo, da se posvetujete s kvalificiranim tehnikom ali se obrnete na podporo strankam.

9. Garancija in podpora

Za informacije o garanciji, tehnično podporo ali servisne poizvedbe glejte dokumentacijo, ki ste jo prejeli ob nakupu, ali se obrnite na prodajalca. Račun shranite kot dokazilo o nakupu.