1. Uvod
Thank you for choosing the Flysky FS-i6X 10-Channel 2.4GHz RC Transmitter and X6B Receiver. This system utilizes Flysky's Automatic Frequency Hopping Digital System Second Generation (AFHDS 2A) protocol, providing reliable and interference-free control for various RC models, including fixed-wing aircraft, gliders, helicopters, and multi-rotors. This manual provides essential information for the proper setup, operation, and maintenance of your RC system.
2. Vsebina paketa
Prosimo, preverite vsebino paketa in se prepričajte, da so vsi predmeti prisotni in nepoškodovani:
- Flysky FS-i6X 10-Channel 2.4GHz Transmitter
- Flysky X6B i-BUS Receiver
- Čep za vezavo
- Uporabniški priročnik (ta dokument)
3. Nastavitev
3.1 Namestitev baterije oddajnika
The FS-i6X transmitter requires four (4) AA batteries (1.5V each) for operation. Ensure correct polarity when inserting the batteries.
- Odprite pokrov predalčka za baterije na zadnji strani oddajnika.
- Insert four 1.5V AA batteries, observing the polarity markings (+/-).
- Trdno zaprite pokrov prostora za baterije.
3.2 Receiver Connection (X6B)
The X6B receiver is designed for multi-rotor applications and supports PWM, PPM, and i-BUS outputs. Connect the receiver to your flight controller or servos as follows:
- PWM izhod: Connect individual servos or ESCs to channels 1-6 on the receiver.
- Izhod PPM: Connect the PPM output port to your flight controller's PPM input. This provides 8 channels over a single wire.
- Izhod i-BUS: Connect the i-BUS port to your flight controller's serial input. This provides 18 channels and telemetry data over a single wire.
Slika: Flysky X6B i-BUS Receiver board. This image shows the compact blue circuit board of the X6B receiver, featuring dual antennas for improved signal reception, and clearly labeled ports for PPM, i-BUS, and individual PWM channels (CH1-CH6) for connecting to a flight controller or servos.
3.3 Binding Transmitter and Receiver
Binding is the process of linking the transmitter to the receiver, allowing them to communicate exclusively. Ensure both devices are powered off before starting.
- Insert the binding plug into the 'BIND' port on the X6B receiver.
- Connect power to the receiver. The receiver's LED should flash rapidly, indicating it is in binding mode.
- While holding down the 'BIND' button on the FS-i6X transmitter, power on the transmitter.
- The transmitter's screen should display 'Binding...' or similar. Release the 'BIND' button on the transmitter once the binding process begins.
- Once the receiver's LED turns solid, the binding is complete.
- Izklopite tako sprejemnik kot oddajnik.
- Odstranite povezovalni vtič iz sprejemnika.
- Power on the transmitter first, then the receiver. The receiver's LED should now be solid, indicating a successful connection.
4. Navodila za uporabo
4.1 Vklop/izklop
To power on the transmitter, press and hold the power button until the LCD screen illuminates. To power off, press and hold the power button again until the screen turns off.
4.2 Transmitter Layout and Controls
Slika: Flysky FS-i6X RC Transmitter front view. This image displays the front of the FS-i6X transmitter, highlighting its dual stick controls (gimbals), various switches (SWD, SWC, SWB, SWA), rotary knobs (VRB, VRA), and the central LCD screen for menu navigation and displaying flight data.
The FS-i6X transmitter features two primary control sticks (gimbals), several switches, and rotary knobs for controlling your RC model. The LCD screen and navigation buttons allow access to the system's settings.
- Leva palica (način 2): Controls Throttle (vertical) and Rudder (horizontal).
- Desna palica (način 2): Controls Elevator (vertical) and Aileron (horizontal).
- Switches (SWA, SWB, SWC, SWD): Typically used for flight modes, gear, or auxiliary functions.
- Rotary Knobs (VRA, VRB): Used for fine-tuning or proportional control of auxiliary channels.
- LCD zaslon: Displays current settings, telemetry data, and menu options.
- Gumbi za krmarjenje: Uporablja se za navigacijo po menijih in prilagajanje nastavitev.
4.3 Navigacija po menijih in nastavitve
Use the 'OK' button to enter the main menu and the 'UP'/'DOWN' buttons to scroll through options. The 'CANCEL' button typically returns to the previous screen or exits the menu.
- Nastavitev sistema: Configure model type, channel assignments, and system settings.
- Funkcije: Adjust sub-trims, endpoints, dual rates, and exponential settings.
- Zaslon: Monitor channel outputs and telemetry data (if available and configured).
5. Vzdrževanje
Proper maintenance ensures the longevity and reliable performance of your Flysky FS-i6X system.
- Čiščenje: Za čiščenje oddajnika in sprejemnika uporabite mehko, suho krpo. Izogibajte se uporabi topil ali abrazivnih čistil.
- Shranjevanje: Store the transmitter and receiver in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the transmitter if storing for extended periods.
- Skrb za anteno: Ensure the receiver antennas are not bent sharply or damaged. For optimal performance, position them at a 90-degree angle to each other.
- Posodobitve vdelane programske opreme: Periodically check the Flysky official website for firmware updates for your FS-i6X transmitter. Updates can improve performance and add new features. The FS-i6X supports online updates.
6. Odpravljanje težav
If you encounter issues with your FS-i6X system, refer to the following common problems and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Oddajnik se ne vklopi. | Prazne ali nepravilno vstavljene baterije. | Zamenjajte baterije ali preverite polarnost. |
| Receiver LED is flashing rapidly. | Sprejemnik je v načinu povezovanja ali ni povezan. | Izvedite postopek vezave (poglavje 3.3). |
| Ni kontrolnega odziva modela. | Receiver not bound, incorrect wiring, or power issue. | Verify binding, check all connections, ensure receiver has power. |
| Short control range or signal loss. | Damaged antennas, interference, or low transmitter battery. | Check antenna condition and placement, avoid crowded 2.4GHz environments, replace transmitter batteries. |
| Nizka glasnosttagOpozorilo na oddajniku. | Transmitter batteries are low. | Replace transmitter batteries immediately. |
7. Specifikacije
7.1 Flysky FS-i6X RC Transmitter
| Funkcija | Specifikacija |
|---|---|
| Kanali | 6–10 (privzeto 6) |
| Vrsta modela | Fixed-wing / Glider / Helicopter |
| RF območje | 2.408–2.475 GHz |
| RF moč | < 20dBm |
| RF kanali | 135 |
| Pasovna širina | 500 kHz |
| Sistem 2.4 GHz | AFHDS 2A / AFHDS |
| Modulacija | GFSK |
| Stick Resolucija | 4096 |
| Nizka glasnosttage Opozorilo | < 4.2 V |
| Vrata DSC | PS/2 Port PPM |
| Dolžina antene | 26mm (Dual Antenna) |
| Teža | 392 g |
| Moč | 6V DC (4 x 1.5V AA baterije) |
| Zaslon | STN Transflective LCD, 128x64 Lattice, VA 73x39mm, with white backlight |
| Velikost | 174 × 89 × 190 mm |
| Spletna posodobitev | ja |
| barva | Črna |
| Certifikati | CE0678, FCC ID: N4ZFLYSKYI6X |
7.2 Flysky X6B i-BUS Receiver
| Funkcija | Specifikacija |
|---|---|
| Blagovna znamka | Flysky |
| Postavka | X6B i-BUS Receiver |
| Kanali | 6 (PWM), 8 (PPM), 18 (i-BUS) |
| Vrsta modela | Večrotor |
| RF območje | 2.408 ~ 2.475 GHz |
| Pasovna širina | 500 kHz |
| Godbe | 135 |
| RF moč | Manj kot 20 dBm |
| Prejmite občutljivost | -95dBm |
| 2.4 GHz protokol | AFHDS 2A |
| Modulacija | GFSK |
| Stick Resolucija | 1024 |
| Nizka glasnosttage Alarm | ja |
| Vrata DSC | PPM / PWM / i-BUS |
| Dolžina antene | 93mm (Dual Antenna) |
| Vhodna moč | 4.0-8.4V |
| Spletna posodobitev | Da (brezžično) |
| Razpon | > 300m |
| Teža | 4.5 g |
| Velikost | 36 × 22 × 7.5 mm |
| i-BUS Port | ja |
| Certifikati | CE0678, FCC ID: N4ZX6B00 |
Note: The FS-i6X transmitter is also compatible with other Flysky receivers such as FS-iA6B, FS-iA10B, and FS-A8S, which may have different specifications. This manual focuses on the X6B receiver included with this specific product variant.
8. Garancija in podpora
For warranty information and technical support, please refer to the documentation provided by your retailer or contact Flysky customer service directly. Keep your proof of purchase for warranty claims.