Humanscale eFloat Go Electric Height-Adjustable Desk User Manual

1. Uvod in konecview

The Humanscale eFloat Go is an electric height-adjustable desk designed for both home and commercial office environments. It features innovative anti-collision technology, quiet motors, and a programmable hand switch, allowing users to seamlessly adjust their working position throughout the day.

Glavne lastnosti vključujejo:

• Electric Height-Adjustable Table for dynamic work postures.
• Programmable hand switch to store and recall preferred height settings.
• Spacious 30" Depth by 60" Width top (for this specific model).
• Zasnovan za hitro in enostavno postavitev.

Image 1.1: The Humanscale eFloat Go desk in a modern office environment, showcasing its design and functionality with a monitor and accessories.

2. Varnostne informacije

Please read and understand all safety instructions before operating the eFloat Go desk. Failure to follow these instructions may result in injury or damage to the product.

• Always keep hands and objects clear of all moving parts during height adjustments.
• Ne prekoračite priporočene največje teže 250 funtov (113 kg) on the desk surface to ensure stability and safe operation.
• Ensure the power cord is properly routed to prevent tripping hazards or damage.
• Otrokom ne dovolite, da upravljajo mizo brez nadzora odrasle osebe.
• Avoid placing liquids directly on the desk surface without proper coasters or protection.

3. Nastavitev in montaža

The Humanscale eFloat Go desk is designed for straightforward assembly, typically taking under 5 minutes with the recommended tools. Assembly requires at least one person.

3.1 Potrebna orodja

• Izvijač (ni priložen)

3.2 Koraki sestavljanja

1. Razpakirajte komponente: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all components are present according to the packing list.
2. Attach Legs to Top: Position the desk top upside down. Align the desk legs with the pre-drilled holes on the underside of the desk top. Secure the legs using the provided screws and a screwdriver.
3. Connect Control Box and Hand Switch: Locate the control box and connect the motor cables from each leg. Connect the hand switch cable to the designated port on the control box.
4. Smer kablov: Use the included cable management clips to neatly route all cables, ensuring they do not interfere with the desk's movement.
5. Priključite napajanje: Plug the power cord into the control box, then into a standard electrical outlet.
6. Initial Power-On and Reset: After connecting power, the desk may require an initial reset. Refer to Section 4.1 for first-time use and reset procedures.

Image 3.1: Dimensional diagram of the eFloat Go desk, illustrating its 29" depth, 58" width, and 26.5" height.

4. Navodila za uporabo

The eFloat Go desk features an intuitive programmable hand switch for easy height adjustment and memory settings.

4.1 First-Time Use and Reset

Upon initial power-on or after a power interruption, the desk may need to be reset:

1. Pritisnite in držite DOL arrow button until the desk reaches its lowest position and then slightly rises. Release the button.
2. The desk is now calibrated and ready for use.

4.2 Nastavitev višine mize

• Za dvig mize pritisnite in držite UP puščični gumb.
• Če želite spustiti mizo, pritisnite in držite DOL puščični gumb.
• Release the button at your desired height.

4.3 Programming Memory Presets

The hand switch allows you to save up to three preferred height settings:

1. Adjust the desk to your desired height using the UP/DOWN arrow buttons.
2. Pritisnite M (Memory) button. The display will show 'S-'.
3. V 3 sekundah pritisnite enega od oštevilčenih gumbov prednastavitev (1, 2, oz 3). The display will show 'S-1', 'S-2', or 'S-3' to confirm the setting is saved.
4. Repeat for other desired height settings.

4.4 Using Memory Presets

Če želite mizo premakniti na shranjeno višino:

• Preprosto pritisnite ustrezno oštevilčeno prednastavljeno tipko (1, 2, oz 3). Miza se bo samodejno premaknila na shranjeno višino.

4.5 Anti-Collision Technology

The eFloat Go desk is equipped with anti-collision technology. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly to prevent damage. Clear any obstructions before resuming adjustment.

Slika 4.1: Bližnji posnetek view of the programmable hand switch, showing the up/down arrows, memory button (M), and three preset buttons (1, 2, 3).

5. Vzdrževanje

Proper care will ensure the longevity and optimal performance of your Humanscale eFloat Go desk.

• Čiščenje: Wipe the desk surface and frame with a dry, soft cloth. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying thoroughly. Avoid abrasive cleaners or harsh chemicals.
• Okoljski pogoji: Avoid direct sunlight exposure for extended periods, as this may affect the laminate finish.
• Porazdelitev teže: Do not place heavy objects exclusively on the edges of the desk. Distribute weight evenly across the surface.
• Upravljanje kablov: Periodically check that all cables are securely routed and not pinched or damaged.

6. Odpravljanje težav

If you encounter issues with your eFloat Go desk, refer to the following common troubleshooting steps:

6.1 Desk Not Moving

• Preverite moč: Ensure the power cord is securely plugged into both the desk's control box and a functioning wall outlet.
• Postopek ponastavitve: Perform the reset procedure described in Section 4.1.
• Zaščita pred preobremenitvijo: If the desk has been overloaded (exceeding 250 lbs), the motor may have temporarily shut off. Remove excess weight and wait a few minutes before attempting to operate again.

6.2 Uneven Movement or Noise

• Preverite ovire: Ensure there are no objects impeding the legs or frame during movement.
• Ravna površina: Verify the desk is placed on a level floor. Adjust the leveling feet if necessary.
• Ponovno privijte vijake: Over time, some assembly screws may loosen. Carefully re-tighten all assembly screws.

6.3 Anti-Collision System Triggering Frequently

• Prosta pot: Ensure the desk's path of movement is completely clear of any objects, cables, or walls.
• Občutljivost: If the issue persists without clear obstructions, contact Humanscale support for potential sensitivity adjustments or further diagnostics.

7. Specifikacije

8. Garancija in podpora

Humanscale stands behind the quality of its products.

8.1 Informacije o garanciji

The Humanscale eFloat Go desk is covered by a 10-Year, 24/7 Humanscale Warranty. This comprehensive warranty covers parts and labor for manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.

8.2 Podpora strankam

For technical assistance, warranty claims, or further inquiries, please contact Humanscale customer support. You can find more information and contact details by visiting the official Humanscale store:

Visit the Humanscale Store on Amazon