BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Uvod

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Lastnosti izdelka

• Vgrajen senzor gibanja: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Adjustable Hold Time: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Trije načini delovanja:
  • SAMODEJNI način: Light activates when motion is detected in dark conditions.
  • Način VKLOP: Light remains constantly on.
  • Način G: Light activates when motion is detected in both daytime and nighttime conditions.
• Tri barvne temperature: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Izjemno tanek dizajn: Nizko profesionalenfile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Vsestranska namestitev: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Vsebina paketa

Pred začetkom namestitve preverite, ali so prisotne vse komponente:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x Navodila za uporabo (ta dokument)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Varnostne informacije

OPOZORILO: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Preden se lotite kakršnih koli del napeljave, se prepričajte, da je napajanje IZKLOPLJENO.
• Ta svetilka je zasnovana za napajanje z izmenično napetostjo 120 V.
• Ne poskušajte spreminjati napeljave.
• Otroci naj ne bodo v bližini območja namestitve.

Nastavitev in namestitev

Za pravilno namestitev sledite tem korakom:

1. Pripravite se na namestitev:
   • Pred zagonom izklopite napajanje na odklopniku.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Namestite montažni nosilec:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Žične povezave:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Namestitev svetilke:
   • Previdno vstavite vse žice v razdelilno omarico.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Obnovi moč: Ponovno vklopite napajanje na odklopniku.

Slika 4: Vizualni vodnik za postopek namestitve.

Navodila za uporabo

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Izbira načina delovanja:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • SAMODEJNO: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • VKLOPLJENO: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 sekund
   • 120S: 120 sekund (2 minute)
   • 180S: 180 sekund (3 minute)

Figure 5: Switches for adjusting hold time and operating modes.

Vzdrževanje

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• Čiščenje: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Življenjska doba LED: The integrated LED light source has an average lifespan of 30,000 hours and is not user-replaceable.
• Pregled: Občasno preverite svetilko glede morebitnih znakov poškodb ali ohlapnih priključkov. Če odkrijete kakršne koli težave, izključite napajanje in se posvetujte z usposobljenim električarjem.

Odpravljanje težav

Če imate težave s svetilko, si oglejte naslednje pogoste težave in rešitve:

Specifikacije

Garancija in podpora

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN webspletno mesto. Shranite račun kot dokazilo o nakupu.