NutriBullet NB50301S

NutriBullet GO Cordless Blender Instruction Manual

Model: NB50301S

Uvod

The NutriBullet GO Cordless Blender is designed for convenience and portability, allowing you to prepare smoothies and protein shakes on the go. This manual provides essential information for safe and effective use of your appliance.

Pomembni zaščitni ukrepi

Pri uporabi električnih naprav vedno upoštevajte osnovne varnostne ukrepe, da zmanjšate tveganje požara, električnega udara, poškodb ali materialne škode.

Kaj je vključeno

Your NutriBullet GO Cordless Blender package includes:

NutriBullet GO Cordless Blender components including motor base, two cups, two lids, blade cover, and USB charging cord.

Image: All components included with the NutriBullet GO Cordless Blender.

Nastavitev

Polnjenje baterije

  1. Connect the USB charging cord to the charging port on the motor base.
  2. Plug the other end of the USB cord into a compatible USB power adapter (not included).
  3. The indicator light will illuminate during charging. A full charge provides up to 20 blending cycles.
NutriBullet GO Cordless Blender motor base with a blue indicator light, showing it is powered on or charging.

Image: The motor base of the NutriBullet GO Cordless Blender, illustrating the power button and indicator light.

Montaža

  1. Ensure the motor base is fully charged.
  2. Fill the 13oz cup with your desired ingredients. Do not exceed the MAX fill line.
  3. Securely twist the blade assembly onto the cup until it is tightly sealed.
  4. Invert the cup and blade assembly, then align it with the motor base. Twist clockwise until it locks into place.

Navodila za uporabo

Mešanje

  1. After assembly, press the power button on the motor base to begin blending.
  2. The blender will run for a preset cycle. For optimal results, blend in short bursts.
  3. Avoid blending continuously for more than 30 seconds to prevent overheating.
  4. If the blender stops, gently shake the unit to redistribute ingredients and restart.
NutriBullet GO Cordless Blender filled with fruits and berries, ready for blending.

Image: The NutriBullet GO Cordless Blender with ingredients inside, demonstrating its use.

Po mešanju

  1. Once blending is complete, twist the cup counter-clockwise to remove it from the motor base.
  2. Carefully unscrew the blade assembly from the cup.
  3. Attach a To-Go Lid for immediate consumption or storage.

Video: A demonstration of how to use the NutriBullet GO Cordless Blender, including assembly and blending.

Vzdrževanje in čiščenje

Cleaning the Blade and Cups

  1. Immediately after each use, rinse the blade assembly and cups with warm water and mild soap.
  2. Za previdno čiščenje okoli rezil uporabite krtačo.
  3. The cups and lids are top-rack dishwasher safe.

Čiščenje podnožja motorja

  1. Obrišite osnovo motorja z oglasomamp krpo.
  2. Podnožja motorja nikoli ne potapljajte v vodo ali katero koli drugo tekočino.
  3. Pred polnjenjem se prepričajte, da je polnilna vrata suha.

Odpravljanje težav

Mešalnik se ne vklopi:

Sestavine se ne mešajo gladko:

Indikatorska lučka je rdeča:

Specifikacije

FunkcijaSpecifikacija
Številka modelaNB50301S
Moč motorja70 W
Kapaciteta baterije2000 mAh
Zmogljivost skodelice13oz (370 Milliliters)
Material rezilaNerjaveče jeklo
Vrsta materiala BrezplačnoBrez BPA
Vir napajanjaElektrični z vrvico (za polnjenje)
Teža predmeta1.87 funtov

Informacije o garanciji

The NutriBullet GO Cordless Blender comes with a limited warranty. Please refer to the warranty card included in your package or visit the official NutriBullet webZa podrobne pogoje in določila obiščite spletno mesto. Shranite dokazilo o nakupu za uveljavljanje garancije.

Podpora uporabnikom

For further assistance, product registration, or to purchase accessories, please visit the official NutriBullet webspletno mesto ali se obrnite na službo za stranke.

Uradno Webspletno mesto: www.nutribullet.com