Uporabniški priročnik za Bluetooth slušalke za motorna kolesa GEARELEC

1. Izdelek je končanview

The GEARELEC Motorcycle Bluetooth Headset is designed to provide clear communication and entertainment for riders. Featuring an upgraded Bluetooth 5.1 chip, it offers stable connections and a long intercom range of up to 1500 meters. The headset incorporates a triple noise reduction system and 40mm stereo speakers for crystal-clear sound quality, even at high speeds. Its user-friendly design ensures safe and efficient operation while riding.

2. Vsebina paketa

Pred začetkom namestitve preverite, ali so v paketu prisotni vsi elementi:

• 2 x Slušalke
• 2 x Hard Mics
• 2 x Soft Mics
• 4 x lepilni trakovi
• 2 x polnilni kabli
• 2 x kovinske sponke
• 2 x izvijača
• 4 x Vijaki
• 3m Foam Pad for Microphone x4
• 3m Foam Pad for Speaker x8
• Quick-release Clip x2

3. Navodila za namestitev

3.1. Headset Installation on Helmet

Follow these steps to properly install the headset on your helmet:

1. Montaža Clamp: Zavarujte pritrditev klamp to the helmet.
2. Pozicioniranje: Namestite clamp to the proper position on the left side of the helmet.
3. Aligning Host: Poravnajte clamp slot and install the FX host onto the clamp.
4. Earphone Velcro Pads: Stick the earphone velcro pads at the ear position inside the helmet.
5. Slušalke: Stick the headphones on the Velcro pads.
6. Priključek za slušalke: Plug the earphone into the FX earphone jacket.

3.2. Povezovanje z mobilnim telefonom prek Bluetootha

To connect your headset to your mobile phone:

1. Vstopite v način seznanjanja: Long press the headset power button until the indicator flashes red and blue alternately. This indicates the headset is in pairing state.
2. Povežite se: On your mobile phone, open Bluetooth settings and find "DK01" in the list of available devices. Click to connect.

3.3. Intercom Pairing Between Two Units

To establish intercom communication between two GEARELEC headsets:

1. Vstopite v način seznanjanja: On both units, press and hold the power buttons until the indicators become red and blue alternate flashing lights.
2. Začetek seznanjanja: Press the power button of either unit. Both units will begin to pair.
3. Seznanjanje končano: When the indicators of both units become slow flashing blue lights, it means the pairing is complete.

4. Navodila za uporabo

4.1. Osnovne funkcije

• Vklop/izklop: Dolgo pritisnite gumb za vklop.
• Predvajanje glasbe/premor: Enkrat pritisnite gumb za vklop.
• Naslednja pesem: Pritisnite gumb '+'.
• Prejšnja pesem: Pritisnite gumb '-'.
• Povečaj glasnost: Dolgo pritisnite gumb '+'.
• Znižaj glasnost: Dolgo pritisnite gumb '-'.
• Sprejmi/zavrni klice: Use the dedicated phone button.

4.2. Opis lučke indikatorja

The headset features indicator lights to show its status:

• Rdeča indikatorska luč: When charging, the red light is on. It automatically turns off when the battery is fully charged.
• Modra indikatorska lučka: The blue light flashes intermittently when the mobile phone is successfully connected.
• Red and Blue Flashing Alternately: This indicates the headset is waiting for a Bluetooth connection from the mobile phone. After a successful connection, the headset lights up blue.

5. Nega in vzdrževanje

To ensure the longevity and optimal performance of your GEARELEC Bluetooth Headset, follow these care guidelines:

• Vodoodpornost: The headset has an IP65 protection level, making it resistant to water splashes and dust. While it can withstand rain, avoid submerging it in water.
• Temperaturno območje: The headset is designed to operate in a wide temperature range from -40℃ to 60℃. Avoid exposing it to extreme temperatures outside this range for prolonged periods.
• Čiščenje: Uporabite mehko, damp cloth to clean the exterior of the headset. Do not use harsh chemicals or abrasive cleaners.
• Shranjevanje: When not in use for extended periods, store the headset in a cool, dry place away from direct sunlight.
• Polnjenje: Always use the provided Type-C charging cable. Ensure the charging port is dry before connecting the cable.

6. Odpravljanje težav

If you encounter issues with your GEARELEC Motorcycle Bluetooth Headset, consider the following general advice:

• Brez napajanja: Ensure the battery is charged. Connect the headset to the charging cable and allow it to charge for at least 30 minutes before attempting to power on again.
• Težave pri seznanjanju: If the headset does not pair with your phone or another unit, ensure both devices are in pairing mode and within range. Try restarting both the headset and the device you are trying to pair with. Clear previous Bluetooth connections on your phone if necessary.
• Ni zvoka/slaba kakovost zvoka: Check the volume levels on both the headset and the connected device. Ensure the speakers are correctly positioned inside the helmet and that the microphone is not obstructed. Verify the headset is fully charged.
• Prekinitev interkoma: If the intercom frequently disconnects, ensure both units are within the specified 1500m range and there are no major obstructions. Re-pair the units if the issue persists.

For persistent issues or more detailed troubleshooting, please refer to the contact information in the Warranty & Support section.

7. Specifikacije

8. Garancija in podpora

GEARELEC is committed to providing a satisfactory experience for its customers. While specific warranty terms are not detailed in this manual, the manufacturer stands behind its product.

If you have any questions, suggestions, or require technical assistance regarding the use or functionality of your GEARELEC Motorcycle Bluetooth Headset, please contact the manufacturer directly through their official channels or the retailer from whom you purchased the product. They will serve you wholeheartedly to resolve any concerns.