MIKASA SF3J-YP

MIKASA Smile Soccer Ball SF3J User Manual

Model: SF3J-YP

Brand: MIKASA

Konec izdelkaview

The MIKASA Smile Soccer Ball SF3J is a lightweight, soft soccer ball designed for children. Made from EVA material, it offers a gentle touch and is easy to kick, allowing for long-distance shots. It is available in various color combinations.

MIKASA Smile Soccer Ball SF3J in yellow and pink

Image: MIKASA Smile Soccer Ball SF3J (Yellow/Pink variant)

Nastavitev

The MIKASA Smile Soccer Ball is shipped deflated or partially deflated. Follow these steps to prepare your ball for use:

  1. Prepare Inflation Equipment: Ensure you have a ball pump and a needle adapter.
  2. Moisten Needle: Lightly moisten the needle adapter with water or silicone oil before inserting it into the ball's valve. This helps prevent damage to the valve.
  3. Insert Needle: Carefully insert the moistened needle straight into the valve.
  4. Napihnite žogo: Begin pumping air into the ball. The recommended internal pressure for the SF3J model is 0.10 to 0.15 kgf/cm². Do not over-inflate the ball, as this can cause damage and reduce its lifespan.
  5. Check Pressure: If you have a pressure gauge, use it to ensure the ball is inflated to the recommended pressure. Alternatively, gently press on the ball; it should feel firm but still have a slight give.
  6. Odstranite iglo: Carefully remove the needle from the valve.

Pomembno: Always refer to the pressure indication printed near the air inlet on the ball itself for the most accurate optimal pressure.

Navodila za uporabo

The MIKASA Smile Soccer Ball SF3J is designed for recreational play, particularly for children. Its soft EVA material makes it suitable for various playing environments, including grass and dirt surfaces.

Vzdrževanje

Proper maintenance will extend the life of your MIKASA Smile Soccer Ball:

Odpravljanje težav

Pogoste težave in njihove rešitve:

TežavaMožen vzrokrešitev
Ball is deflated or soft.Loss of air pressure over time; minor leak.Re-inflate the ball to the recommended pressure (0.10-0.15 kgf/cm²). Check the valve for debris or damage.
Ball feels too hard.Over-inflated.Release a small amount of air until the ball reaches the recommended pressure.
Ball does not hold air.Puncture or damaged valve.Inspect the ball for visible punctures. If the valve is damaged, the ball may need replacement. For minor leaks, a valve sealant might be used, but this is not guaranteed.
Surface appears dirty or stained.Accumulation of dirt and grime from play.Očistite žogo z oglasomamp krpo in blago milno raztopino. Temeljito sperite in posušite na zraku.

Specifikacije

FunkcijaPodrobnost
Številka modela izdelkaSF3J-YP
barvaYellow/Pink (other variants available)
MaterialEVA (Ethylene-vinyl acetate) special sponge
VrstaNogometna žoga
VelikostVelikost 3
ObsegPribl. 58-60 cm
PremerPribl. 19 cm
TežaPribl. 150 g
Recommended Internal Pressure0.10 - 0.15 kgf/cm²
Ciljna publikaChildren, Unisex
Površinska združljivostGrass, Dirt
Država izvoraThailand / Cambodia

Garancija in podpora

For information regarding warranty, returns, or product support, please refer to the retailer's policy where the product was purchased or visit the official MIKASA webspletnega mesta. Shranite dokazilo o nakupu za morebitne garancijske zahtevke.

Official MIKASA Webspletno mesto: www.mikasasports.co.jp