EMOS ZM4328

EMOS ZM4328 TORI LED Ceiling Light 15W with MW Sensor Instruction Manual

Model: ZM4328

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your EMOS ZM4328 TORI LED Ceiling Light. This 15W LED light features a microwave motion sensor, providing 1500 lumens of 4000K neutral white light. It is designed for both indoor and outdoor use, including damp environments, thanks to its IP54 rating. Please read these instructions carefully before installation and retain them for future reference.

EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty label

Figure 1: EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty indication.

2. Varnostna navodila

  • Električna varnost: Namestitev mora opraviti usposobljen električar v skladu z lokalnimi predpisi o ožičenju. Pred namestitvijo ali vzdrževanjem se prepričajte, da je napajanje izklopljeno.
  • voltage: This product operates on a 230V AC power supply.
  • IP54 ocena: The light is protected against dust ingress and splashing water from any direction. This makes it suitable for damp locations and outdoor sheltered areas, but not for submersion.
  • Vir svetlobe: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the light source.
  • Delovna temperatura: Ensure the operating environment is within the specified temperature range to prevent damage.

3. Vsebina paketa

Pred začetkom namestitve preverite, ali so prisotne vse komponente:

  • 1x EMOS ZM4328 TORI LED Ceiling Light with MW Sensor
  • Mounting accessories (screws, wall plugs, foam pads)
Mounting screws, wall plugs, and foam pads for EMOS ZM4328 TORI LED Ceiling Light

Figure 2: Included mounting accessories.

4. Nastavitev in namestitev

Za pravilno namestitev sledite tem korakom:

  1. Odklop napajanja: Pred začetkom se prepričajte, da je glavno napajanje območja namestitve izklopljeno z odklopnikom.
  2. Pripravite montažno površino: Choose a suitable location on a ceiling or wall. The light is suitable for indoor and outdoor use, including bathrooms, hallways, kitchens, balconies, and terraces.
  3. Pritrdite montažni nosilec: Remove the mounting bracket from the back of the light fixture. Use the bracket as a template to mark drilling points on the surface. Drill holes and insert wall plugs if necessary. Secure the mounting bracket to the surface using the provided screws.
Nazaj view of EMOS ZM4328 TORI LED Ceiling Light showing mounting bracket

Slika 3: Zadaj view with mounting bracket.

  1. Ožičenje: Connect the main power supply cables to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral). The terminal block is designed for secure connections.
Close-up of the wiring terminal inside the EMOS ZM4328 TORI LED Ceiling Light

Figure 4: Wiring terminal connection points.

  1. Secure Light Fixture: Once wiring is complete, carefully attach the light fixture to the mounting bracket, ensuring it is securely fastened.
  2. Obnovi moč: Switch the main power supply back on.

5. Navodila za uporabo

The EMOS ZM4328 TORI LED Ceiling Light features an integrated microwave motion sensor for automatic operation.

Funkcionalnost senzorja gibanja

  • The microwave motion detector reacts to movement within a range of up to 6 meters.
  • Unlike traditional PIR sensors, microwave sensors can detect movement even through thin doors, window glass, or thin walls, offering broader coverage.
  • The light will automatically turn on when motion is detected and turn off after a set delay if no further motion is detected.

Adjusting Sensor Settings (DIP Switches)

The light features DIP switches to adjust sensitivity, detection range, and hold time. These switches are typically located on the side of the fixture, accessible by opening a small cover.

Close-up of DIP switches for adjusting sensor settings on EMOS ZM4328 TORI LED Ceiling Light

Figure 5: DIP switches for sensor configuration.

Refer to the markings next to the DIP switches for specific settings related to:

  • Obseg zaznavanja: Adjusts the maximum distance at which motion is detected.
  • Čas zadrževanja: Sets the duration the light remains on after the last detected motion.
  • Daylight Sensor (Lux Level): Določa raven svetlobe okolice, pri kateri se senzor aktivira. Na primerample, you can set it to only activate when it's dark.

Opomba: Always disconnect power before adjusting DIP switches to avoid electrical hazards.

6. Vzdrževanje

  • Čiščenje: To clean the light fixture, ensure the power is off. Use a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or diffuser.
  • Zaščita pred insekti: The high IP54 protection class prevents mosquitoes or flies from entering the lamp, reducing the need for internal cleaning.
  • Brez delov, ki bi jih lahko servisiral uporabnik: The LED light source is integrated and not designed for user replacement. Do not attempt to open the sealed unit beyond accessing the wiring and DIP switches.

7. Odpravljanje težav

If you encounter issues with your EMOS ZM4328 TORI LED Ceiling Light, refer to the following common problems and solutions:

TežavaMožen vzrokrešitev
Luč se ne vklopi.Brez napajanja.
Nepravilno ožičenje.
Nastavitev senzorja dnevne svetlobe je previsoka.
Preverite odklopnik in priključek za napajanje.
Verify wiring connections (Live, Neutral).
Adjust the daylight sensor (Lux) setting on the DIP switches.
Luč ostane prižgana nenehno.Zaznano neprekinjeno gibanje.
Nastavitev časa zadrževanja je predolga.
Okvara senzorja.
Ensure no constant movement in the detection area.
Adjust the hold time setting on the DIP switches to a shorter duration.
Če težava ne izgine, se obrnite na podporo.
Luč se prepogosto prižiga/ugaša.Sensitivity too high.
Detection range too wide.
Reduce the sensitivity and/or detection range using the DIP switches.
Senzor ne zaznava gibanja.Sensitivity too low.
Detection range too narrow.
Senzor za blokiranje ovir.
Daylight sensor setting too low (light always on).
Increase sensitivity and/or detection range via DIP switches.
Ensure no large metal objects or thick walls are directly in front of the sensor.
Adjust the daylight sensor (Lux) setting.

8. Specifikacije

ZnamkaEMOS
Številka modelaZM4328
Dimenzije (premer x višina)220 mm x 53 mm (približno 8.66 x 2.09 palca)
Teža622 gramov (približno 1.37 funta)
Moč15 vatov
Svetlobni tok1500 lumnov
Barvna temperatura4000 Kelvinov (nevtralno bela)
Indeks barvnega upodabljanja (CRI)80
Incandescent Equivalence100 vatov
voltage230 V AC
Ocena IPIP54
MaterialAcrylonitrile Butadiene Styrene (ABS), Plastic diffuser
Posebne lastnostiMicrowave Motion Detector, Energy-saving, Waterproof
Razred energijske učinkovitostiE (on new scale from 1.9.2021)
Diagram showing dimensions of EMOS ZM4328 TORI LED Ceiling Light: 220mm diameter, 53mm height

Slika 6: Dimenzije izdelka.

Energy efficiency label showing class E for the EMOS ZM4328 TORI LED Ceiling Light

Figure 7: Energy Efficiency Label (Class E).

9. Garancija in podpora

Garancija

This EMOS ZM4328 TORI LED Ceiling Light comes with a 3-letna garancija od datuma nakupa. Za uveljavljanje garancije shranite dokazilo o nakupu. Garancija krije napake v materialu in izdelavi pri normalni uporabi.

Podpora uporabnikom

For technical assistance, warranty claims, or any questions regarding your product, please contact your retailer or the EMOS customer service department. Contact information can typically be found on the product packaging or the official EMOS webmesto.